Rule 311-1-04.2 | Tactical trousers: construction specifications.
(A) Design:
(1) The tactical trousers shall have a plain front with a button or zipper fly. The trousers may be either
(a) A dress uniform design with permanent front leg creases and four pockets: two quarter top front pockets and two inset back pockets, or
(b) A battle dress uniform design having
(i) Six pockets: two front slash pockets, two rear inset pockets with button-down flaps, and two large, pleated bellow cargo pockets with button-down flaps located one on the outside of each leg; and
(ii) Optional tactical features: adjustment tabs, leg drawstrings, knee and seat patches of self material, stretch or plain waistbands, side adjustment tabs, and permanent front leg creases.
(2) The tactical trousers shall be made on a uniform pattern in both male and female measurements.
(B) All pocket flaps shall contain fusible lining material.
(C) Stitching: All seams shall be sewn with ten to twelve stitches per inch.
(D) Care instructions must be permanently attached to a rear pocket and include all washing and drying instructions.
Supplemental Information