Skip to main content
Back To Top Top Back To Top
This website publishes administrative rules on their effective dates, as designated by the adopting state agencies, colleges, and universities.

Rule 3745-279-55 | Analysis plan at used oil processing and re-refining facilities.

 

Owners or operators of used oil processing and re-refining facilities must develop and follow a written analysis plan describing the procedures that will be used to comply with the analysis requirements of rule 3745-279-53 of the Administrative Code and, if applicable, rule 3745-279-72 of the Administrative Code. The owner or operator must keep the plan at the facility.

(A) Rebuttable presumption for used oil in rule 3745-279-53 of the Administrative Code. At a minimum, the plan must specify the following:

(1) Whether sample analyses or knowledge of the halogen content of the used oil will be used to make this determination.

(2) If sample analyses are used to make this determination:

(a) The sampling method used to obtain representative samples to be analyzed. A representative sample may be obtained using either:

(i) One of the sampling methods in the appendix to rule 3745-51-20 of the Administrative Code; or

(ii) A method shown to be equivalent under 40 CFR 260.20 and 40 CFR 260.21;

(b) The frequency of sampling to be performed, and whether the analysis will be performed on-site or off-site; and

(c) The methods used to analyze used oil for the parameters specified in rule 3745-279-53 of the Administrative Code; and

(3) The type of information that will be used to determine the halogen content of the used oil.

(B) On-specification used oil fuel in rule 3745-279-72 of the Administrative Code. At a minimum, the plan must specify the following if rule 3745-279-72 of the Administrative Code is applicable:

(1) Whether sample analyses or other information will be used to make this determination;

(2) If sample analyses are used to make this determination:

(a) The sampling method used to obtain representative samples to be analyzed. A representative sample may be obtained using either:

(i) One of the sampling methods in the appendix to rule 3745-51-20 of the Administrative Code; or

(ii) A method shown to be equivalent under 40 CFR 260.20 and 40 CFR 260.21;

(b) Whether used oil will be sampled and analyzed prior to or after any processing/re-refining;

(c) The frequency of sampling to be performed, and whether the analysis will be performed on-site or off-site; and

(d) The methods used to analyze used oil for the parameters specified in rule 3745-279-72 of the Administrative Code; and

(3) The type of information that will be used to make the on-specification used oil fuel determination.

[Comment: For dates of non-regulatory government publications, publications of recognized organizations and associations, federal rules, and federal statutory provisions referenced in this rule, see rule 3745-50-11 of the Administrative Code titled "Incorporated by reference."]

Supplemental Information

Authorized By: 3734.12
Amplifies: 3734.12
Five Year Review Date:
Prior Effective Dates: 10/20/1998, 12/7/2004