Upon the consent of the permittee, the director may modify a permit to make the corrections or allowances for changes in the permitted activity listed in this rule, without following the procedures of Chapter 3745-47 of the Administrative Code. Any permit modification not processed as a minor modification under this rule must be made for cause and with draft permit and public notice as required in Chapter 3745-47 of the Administrative Code and rule 3745-34-23 of the Administrative Code. Minor modifications may only:
(A) Correct typographical errors;
(B) Require more frequent monitoring or reporting by the permittee;
(C) Change an interim compliance date in a schedule of compliance, provided the new date is not more than one hundred twenty days after the date specified in the existing permit and does not interfere with attainment of the final compliance date requirement; or
(D) Allow for a change in ownership or operational control of a facility where the director determines that no other change in the permit is necessary, provided that a written agreement containing a specific date for transfer of permit responsibility, coverage, and liability between the current and new permittees has been submitted to the director.
(E) Change quantities or types of fluids injected which are within the capacity of the facility as permitted and, in the judgment of the director, would not interfere with the operation of the facility or its ability to meet conditions described in the permit and would not change its classification.
(F) Change construction requirements in a permit to drill, approved by the director pursuant to paragraph (A)(1) of rule 3745-34-27 of the Administrative Code(establishing UIC permit conditions), provided that any such alteration shall comply with the requirements of this chapter.
(G) Amend a plugging and abandonment plan which has been updated under paragraph (B)(5) of rule 3745-34-27 of the Administrative Code.
Eff 12-15-82; 7-25-84
Rule promulgated under: RC Chapter 119.
Rule amplifies: RC 6111.043