4101:2-15-01 Referenced standards.

1501.1 General. This chapter lists the codes and standards that are referenced in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and the title. The application of the referenced standards shall be as specified in Section 102.5 of the building code.

1501.2 Referenced codes: When indicated in the OMC, the following codes refer to provisions in the listed chapters of the Administrative Code:

 

	
Referenced code                          Ohio Administrative Code chapters


	
Building Code                          4101:1-1 to 4101:1-35


	
Fire Code                              1301:7-1 to 1301:7-7


	
Ohio Boiler and Pressure Vessel Rules  4101:4-1 to 4101:4-10


	
Plumbing Code                          4101:3-1 to 4101:3-13

1501.3 Referenced Standards.

ACCAAir Conditioning Contractors of America

2800 Shirlington Road, Suite 300

Arlington, VA 22206

 

	
Standard reference number  Title


	
Manual D-95                  Residential Duct Systems


	
183-2007                    Peak Cooling and Heating Load Calculations in Buildings Except Low-Rise Residential Buildings

AHRIAir-Conditioning, Heating and Refrigeration Institute

4100 North Fairfax Drive, Suite 200

 

	
Standard reference number  Title


	
700-06                      Purity Specifications for Fluorocarbon and Other Refrigerants

ANSIAmerican National Standards Institute

11 West 42nd Street

New York, NY 10036

 

	
Standard reference number  Title


	
Z 21.8 -1994 (R2002)        Installation of Domestic Gas Conversion Burners

ASHRAEAmerican Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.

1791 Tullie Circle, NE

Atlanta, GA 30329

 

	
Standard reference number  Title


	
Handbook-2009              ASHRAE Fundamentals Handbook-


	
15-2010                      Safety Standard for Refrigeration Systems


	
34-2010                      Designation and Safety Classification of Refrigerants


	
62.1 -2010                  Ventilation for Acceptable Indoor Air Quality


	
62.2. -2010                  Ventilation for Acceptable Indoor Air Quality in Low-Rise Residential Buildings

ASMEAmerican Society of Mechanical Engineers

Three Park Avenue

New York, NY 10016-5990

 

	
Standard reference number          Title


	
B 1.20.1-1983 (R2006)              Pipe Threads, General Purpose (Inch


	
B 16.3 -2006                      Malleable Iron Threaded Fittings, Classes 150 & 300


	
B 16.5 -2009                      Pipe Flanges and Flanged Fittings NPS 1/2 through NPS 24-.


	
B 16.9 -2009                      Factory Made Wrought Steel Buttwelding Fittings


	
B 16.11 -2009                      Forged Fittings, Socket-welding and Threaded


	
B 16.15 -2006                      Cast Bronze Threaded Fittings


	
B 16.18 -2001 (Reaffirmed 2005)  Cast Copper Alloy Solder Joint Pressure Fittings


	
B 16.22 -2001 (Reaffirmed 2005)  Wrought Copper and Copper Alloy Solder Joint Pressure Fittings


	
B 16.23 -2002 (Reaffirmed 2006)  Cast Copper Alloy Solder Joint Drainage Fittings DWV


	
B 16.24 -2006                      Cast Copper Alloy Pipe Flanges and Flanged Fittings: Class 150, 300, 400, 600, 900, 1500 and


	
B 16.26 -2006                      Cast Copper Alloy Fittings for Flared Copper Tubes


	
B 16.28 -1994                      Wrought Steel Buttwelding Short Radius Elbows and Returns


	
B 16.29 -2007                      Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings-


	
B 31.9 -2010                      Building Services Piping


	
BPVC-2004                          Boiler & Pressure Vessel Code


	
BPVC Section IX-2004              Welding and Brazing Qualifications


	
CSD-1-2010                        Controls and Safety Devices for Automatically Fired

ASSEAmerican Society of Sanitary Engineering

901 Canterbury, Suite A

Westlake, OH 44145

 

	
Standard reference number  Title


	
1017-09                      Temperature Actuated Mixing Valves for Hot Water Distribution Systems

ASTMASTM International

100 Barr Harbor Drive

West Conshohocken, PA 19428

 

	
Standard reference number  Title


	
A 53/A 53M-10              Specification for Pipe, Steel, Black and Hot-dipped, Zinc-coated Welded and Seamless


	
A 106/A106M-10              Specification for Seamless Carbon Steel Pipe for High-Temperature Service


	
A 126-04 (2009)              Specification for Gray Iron Castings for Valves, Flanges and Pipe Fittings


	
A 254-97 (2007)              Specification for Copper Brazed Steel Tubing


	
A 420/A 420M-10              Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service


	
A 539-99                    Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines


	
B 32-08                      Specification for Solder Metal


	
B 42-10                      Specification for Seamless Copper Pipe, Standard Sizes


	
B 43-09                      Specification for Seamless Red Brass Pipe, Standard


	
B 68-02                      Specification for Seamless Copper Tube, Bright Annealed


	
B 75-02                      Specification for Seamless Copper


	
B 88-09                      Specification for Seamless Copper Water


	
B 135-10                    Specification for Seamless Brass Tube


	
B 251-10                    Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube


	
B 280-08                    Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service


	
B 302-07                    Specification for Threadless Copper Pipe, Standard


	
B 813-10                    Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube


	
C 315-07                    Specification for Clay Flue Liners and Chimney Pots


	
C 411-05                    Test Method for Hot-surface Performance of High-temperature Thermal Insulation


	
D 56-05 (2010)              Test Method for Flash Point by Tag Closed Tester


	
D 93-10a                    Test Method for Flash Point of Pensky-Martens Closed Cup Tester


	
D 1527-99(2005)              Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80


	
D 1693-08                  Test Method for Environmental Stress-Cracking of Ethylene Plastics


	
D 1785-06                  Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe, Schedules 40, 80 and 120


	
D 2235-04                  Specifications for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings


	
D 2241-09                  Specification for Poly (Vinyl Chloride)(PVC) Pressure-rated Pipe (SDR-Series


	
D 2282-99(2005)              Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)


	
D 2412-10                  Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-plate Loading


	
D 2447-03                  Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter


	
D 2466-06                  Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings, Schedule 40


	
D 2467-06                  Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings, Schedule 80


	
D 2468-96a                  Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40


	
D 2513-09a                  Specification for Thermoplastic Gas Pressure Pipe, Tubing, and


	
D 2564-04(2009)e01          Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems


	
D 2657-07                  Standard Practice for Heat Fusion Joining ofPolyolefinPipe and Fittings


	
D 2683-10                  Specification for Socket-type Polyethylene Fittings for Outside Diameter-controlled Polyethylene Pipe and Tubing


	
D 2837-08                  Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products


	
D 2846/D 2846M-09b          Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems


	
D 2996-01(2007)e01          Specification for Filament-wound Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Pipe


	
D 3035-08                  Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter


	
D 3278-96(2004)e01          Test Methods for Flash Point of Liquids by Small Scale Closed-cup Apparatus


	
D 3261-10a                  Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and


	
D 3309-96a(2002)            Specification for Polybutylene (PB) Plastic Hot and Cold Water Distribution Systems


	
D 3350-10                  Specification for Polyethylene Plastics Pipe and Fittings Materials


	
E 84-10b                    Test Method for Surface Burning Characteristics of Building Materials


	
E 119-10b                  Test Method for Fire Tests of Building Construction and


	
E 136-09b                  Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 Degrees C


	
E 814-10                    Test Method for Fire Tests of Through-penetration Fire


	
E 1509-04                  Specification for Room Heaters, Pellet Fuel-burning


	
E 2231-09                  Standard Practice For Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics


	
E 2336-04 (2009)            Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems


	
F 438-09                    Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40


	
F 439-09                    Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80


	
F 441/F 441M-09              Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and


	
F 442/F 442M-09              Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR).


	
F 493-10                    Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings


	
F 876-10                    Specification forCrosslinkedPolyethylene (PEX) Tubing


	
F 877-07                    Specification for Crosslinked Polyethylene (PEX) Plastic Hot and Cold Water Distribution Systems.


	
F 1055-98(2006)              Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and


	
F 1281-07                  Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe


	
F 1282-10                  Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe


	
F 1476-07                  Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications


	
F 1924-05                  Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing


	
F 1974-09                  Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe


	
F 2389-10                  Specification for Pressure-Rated Polypropylene Piping Systems


	
F 2623-08                  Standard Specification for Polyethylene of Raised Temperature (PERT) SDR 9 Tubing1

AWSAmerican Welding Society

550 N.W. LeJeune Road P.O. Box 351040

Miami, FL 33135

 

	
Standard reference number  Title


	
A 5.8 -2004                  Specifications for Filler Metals for Brazing and Braze Welding.

AWWAAmerican Water Work Association

6666 West Quincy Avenue

Denver, CO 80235

 

	
Standard reference number  Title


	
C110/A 21.10 -10            Standard for Ductile Iron & Gray Iron Fittings, 2 inches Through 48 inches for Water


	
C115/A 21.15 -05            Standard for Flanged Ductile-iron Pipe with Ductile Iron or Grey-iron Threaded Flanges


	
C151/A 21.51 -09            Standard for Ductile-Iron Pipe, Centrifugally Cast for Water


	
C153/A 21.53 -06            Standard for Ductile-Iron Compact Fittings for Water Service

CSACanadian Standards Association

5060 Spectrum Way Mississauga,

Ontario, Canada L4W 5N6

 

	
Standard reference number  Title


	
B 137.9 -M91 CAN/CSA        Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure-Pipe Systems


	
B 137.10 -05                Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene Composite Pressure-Pipe Systems


	
ANSI CSA America FC1-04      Stationary Fuel Cell Power Systems

DOLDepartment of Labor Occupational Safety and Health Administration

c/o Superintendent of Documents

US Government Printing Office

Washington, DC 20402-9325

 

	
Standard reference number  Title


	
29CFRPart 1910.1000(1974)  Air Contaminants


	
29CFRPart 1910. 1025        Toxic and Hazardous Substances

FSFederal Specifications*

General Services Administration

7th & D Streets Specification Section, Room 6039

Washington, DC 20407

 

	
Standard reference number  Title


	
WW-P-325B (1976)            Pipe, Bends, Traps, Caps and Plugs; Lead (for Industrial Pressure and Soil and Waste Applications

*Standards are available from the Supt. of Documents, U.S. Government Printing Office, Washington, DC 20402-9325.

ICCInternational Code Council, Inc.

500 New Jersey Ave, NW

6th FloorICC

Washington, DC 20001

 

	
Standard reference number  Title


	
IFGC-09                      International Fuel Gas Code (including ICC Emergency Amendment changing IFGC Sections 406.7 )

IIAR International Institute of Ammonia Refrigeration

1110 North Glebe Road

Arlington, VA 22201

 

	
Standard reference number  Title


	
2-99 (with Addendum          A-2005) Equipment, Design, and Installation of Ammonia Mechanical Refrigerating Systems

MSSManufacturers Standardization Society of the Valve & Fittings Industry, Inc. 1

27 Park Street, N.E.

Vienna, VA 22180

 

	
Standard reference number  Title


	
SP-69-2003                  Pipe Hangers and Supports-Selection and Application

NAIMANorth American Insulation Manufacturers Association

44 Canal Center Plaza, Suite 310 Alexandria, VA 22314

 

	
Standard reference number  Title


	
AH116-02                    Fibrous Glass Duct Construction Standards

NFPANational Fire Protection Association

1 Batterymarch Park

Quincy, MA 02169-7471

 

	
Standard reference number  Title


	
30A-08                      Code for Motor Fuel-dispensing Facilities and Repair Garages


	
31-06                      Installation of Oil-burning Equipment


	
37-10                      Stationary Combustion Engines and Gas Turbines


	
58-11                      Liquefied Petroleum Gas Code


	
69-08                      Explosion Prevention Systems


	
70-11                      National Electrical


	
72-10                      Natio nal Fire Alarm Code


	
75-09                      Protection of Information Technology Equipment


	
82-09                      Incinerators and Waste and Linen Handling Systems and Equipment


	
85-07                      Boiler and Combustion Systems Hazards Code


	
91-10                      Exhaust Systems for Air Conveying of Vapors, Gases, and Noncombustible Particulate Solids


	
92B-09                      Smoke Management Systems in Malls, Atria and Large Spaces


	
211-10                      Chimneys, Fireplaces, Vents and Solid Fuel-burning Appliances


	
262-07                      Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-handling Spaces


	
704-07                      Identification of the Hazards of Materials for Emergency Response


	
853-10                      Installation of Stationary Fuel Power Plants

SMACNASheet Metal & Air Conditioning Contractors National Assoc., Inc.

4201 Lafayette Center Drive

Chantilly, VA 20151-1209

 

	
Standard reference number    Title


	
SMACNA/ANSI-2005 SMACNA-03  HVAC Duct Construction Standards-Metal and Flexible (2005) Fibrous Glass Duct Construction Standards

ULUnderwriters Laboratories, Inc.

333 Pfingsten Road

Northbrook, IL 60062-2096

 

	
Standard reference number  Title


	
17-08                      Vent or Chimney Connector Dampers for Oil-fired Appliances


	
103-10                      Factory-built Chimneys, Residential Type and Building Heating Appliance


	
127-08                      Factory-built Fireplaces


	
174-04                      Household Electric Storage Tank Water Heaters-with Revisions through May 2006


	
181-05                      Factory-made Air Ducts and Air Connectors-with Revisions through December 1998


	
181A-05                      Closure Systems for Use with Rigid Air Ducts and Air Connectors-with Revisions through December 1998


	
181B-05                      Closure Systems for Use with Flexible Air Ducts and Air Connectors-with Revisions through December 1998


	
207-01                      Refrigerant-containing Components and Accessories, Nonelectrical- with Revisions through November 2004


	
263-03                      Standard for Fire Test of Building Construction and Materials


	
268-09                      Smoke Detectors for Fire Prevention Signaling Systems


	
268A-08                      Smoke Detectors for Duct Applications


	
343-08                      Pumps for Oil-Burning Appliances


	
391-10                      Solid-fuel and Combination-fuel Central and Supplementary Furnaces


	
412-04                      Refrigeration Unit Coolers-with Revisions through February 2007 .


	
471-10                      Commercial Refrigerators and Freezers


	
508-99                      Industrial Control Equipment-with Revisions through July 2005


	
536-97                      Flexible Metallic Hose-with Revisions through June 2003


	
555-06                      Fire Dampers-with Revisions through January 2002.


	
555C-06                      Ceiling Dampers


	
555S-99                      Smoke Dampers-with Revisions through July 2006


	
586-09                      High-efficiency, Particulate, Air Filter Units


	
641-95                      Type L Low-temperature Venting Systems-with Revisions through August 2005


	
710-95                      Exhaust Hoods for Commercial Cooking Equipment-with Revisions through February 2007.


	
710B-04                      Recirculating Systems


	
723-08                      Standard for Test for Surface Burning Characteristics of Building Materials


	
726-95                      Oil-fired Boiler Assemblies-with Revisions through March 2006


	
727-06                      Oil-fired Central Furnaces


	
729-03                      Oil-fired Floor Furnaces-with Revisions through January 1999


	
730-03                      Oil-fired Wall Furnaces-with Revisions through January 1999


	
731-95                      Oil-fired Unit Heaters-with Revisions through February 2006


	
732-95                      Oil-fired Storage Tank Water Heaters-with Revisions through February 2005


	
737-07                      Fireplace Stoves


	
762-03                      Outline of Investigation for Power Ventilators for Restaurant Exhaust Appliances


	
791-06                      Residential Incinerators.


	
834-04                      Heating, Water Supply and Power Boilers Electric-with Revisions through March 2006


	
858-05                      Household Electric Ranges-with Revisions through April 2006


	
867-00                      Electrostatic Air Cleaners-with Revisions through May 2004


	
875-09                      Electric Dry Bath Heater


	
896-93                      Oil-burning Stoves-with Revisions through May 2004


	
900-04                      Air Filter Units


	
923-08                      Microwave Cooking Appliances


	
959-01                      Medium Heat Appliance Factory-built Chimneys-with Revisions through September 2006


	
1240-05                      Electric Commercial Clothes


	
1261-01                      Electric Water Heaters for Pools and Tubs-with Revisions through June 2004


	
1453-04                      Electric Booster and Commercial Storage Tank Water Heaters-with Revisions through May 2006


	
1482-10                      Solid-fuel Type Room Heaters


	
1777-07                      Chimney Liners .


	
1812-09                      Standard for Ducted Heat Recovery Ventilators


	
1815-09                      Standard for Nonducted Heat Recovery Ventilators


	
1820-04                      Fire Test of Pneumatic Tubing for Flame and Smoke Characteristics


	
1887-04                      Fire Tests of Plastic Sprinkler Pipe for Visible Flame and Smoke Characteristics


	
1978-05                      Grease Ducts


	
1995-05                      Heating and Cooling Equipment .


	
2158-97                      Electric Clothes Dryers-with Revisions through May 2004


	
2162-01                      Outline of Investigation for Commercial Wood-fired Baking Ovens-Refractory Type


	
2200-98                      Stationery Engine Generator Assemblies


	
2221-10                      Tests of Fire Resistive Grease Duct Enclosure Assemblies

Replaces: 4101:2-15-01

Effective: 11/01/2011

R.C. 119.032 review dates: 11/01/2016

Promulgated Under: 119.03

Statutory Authority: 3781.10(A)

Rule Amplifies: 3781.10, 3781.11, 3791.04

Prior Effective Dates: 7/1/82, 3/1/85, 3/1/86, 1/1/89, 9/1/92, 7/1/95, 2/1/96, 3/1/98, 7/1/98, 1/1/02, 1/1/04, 3/1/05, 9/6/05, 3/1/06, 7/1/07, 1/1/08, 3/31/08(Emer.), 6/24/08, 1/1/09