Chapter 4101:2-88 Refuse Containers

As used in this chapter:

“Refuse container” means only that type of refuse container which is self-dumping by means of a specially designed front, side, or rear loading vehicle.

R.C. 119.032 review dates: 07/10/2007 and 07/01/2012

Promulgated Under: 119.03

Statutory Authority: 3781.10(E)

Rule Amplifies: 3781.03, 3791.04

Prior Effective Dates: 10/11/78

Pursuant to sections 3791.21 and 3791.99 of the Revised Code, the purpose of these rules is to establish safety standards for the manufacture, construction, installation, or redesign of refuse containers so that they will not tip over if persons climb in or on them.

R.C. 119.032 review dates: 07/10/2007 and 07/01/2012

Promulgated Under: 119.03

Statutory Authority: 3781.10(E)

Rule Amplifies: 3781.03, 3791.04

Prior Effective Dates: 10/11/78

All newly manufactured or installed refuse containers and all existing refuse containers shall meet the standards established by “Chapter II, Subchapter B,” consumer product safety commission regulations entitled: “Part 1301 – Ban of Unstable Refuse Bins” and dated June 13, 1977.

R.C. 119.032 review dates: 07/10/2007 and 07/01/2012

Promulgated Under: 119.03

Statutory Authority: 3781.10(E)

Rule Amplifies: 3781.03, 3791.04

Prior Effective Dates: 10/11/78

On or after the compliance date established by section 3791.21 of the Revised Code, no person shall install, manufacture, sell, lease or purchase any refuse container which does not conform to the rules herein established.

R.C. 119.032 review dates: 07/10/2007 and 07/01/2012

Promulgated Under: 119.03

Statutory Authority: 3781.10(E)

Rule Amplifies: 3781.03, 3791.04

Prior Effective Dates: 10/11/78