4101:1-35-01 Referenced standards.

3501.1 General. This chapter lists the standards that are referenced in various sections of the building code. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title. The application of the referenced standards shall be as specified in Section 102.5.

3501.2 Referenced codes. When indicated in this code, the following codes refer to provisions in the listed chapters of the administrative code:

Referenced Code

Ohio Administrative Code Chapters

Building Code

Energy Code

Fire Code

Mechanical CodeOhio Boiler and Pressure Vessel Rules

Ohio Elevator Code

Residential Code of Ohio for One, Two and Three Family Dwellings

4101:1-1 to 4101:1-35

4101:1-13

1301:7-1 to 1301:7-7

4101:2-1 to 4101:2-15

4101:4-1 to 4101:4-10

4101:5-1 to 4101:5-3

4101:8-1 to 4101:8-44

Plumbing Code

4101:3-1 to 4101:3-13

3501.3Building Code Referenced Standards.

Aluminum Association

1525 Wilson Boulevard, Suite 600

Arlington, VA 22209

AA

  

Standard

  

reference

  

number

Title

ADM1-10

Aluminum Design Manual: Part 1-A Specification for

  

Aluminum Structures, Allowable Stress Design; and Part 1-

  

B-Aluminum Structures, Load and Resistance Factor

  

Design

ASM 35-00

Aluminum Sheet Metal Work in Building Construction

  

(Fourth Edition)

American Architectural Manufacturers Association

1827 Waldon Office

Square, Suite 550

Schaumburg, IL 60173

AAMA

  

Standard

  

reference

  

number

Title

1402-09

Standard Specifications for Aluminum Siding,

  

Soffit and Fascia

AAMA/WDMA/CSA

  

101/I.S.2/A440-08

North American Fenestration

  

Standard/Specifications for Windows, Doors and

  

Skylights

American Concrete Institute

38800 Country Club Dive

Farmington Hills, MI 48331

ACI

  

Standard

  

reference

  

number

Title

216.1 -07

Standard Method for Determining Fire Resistance of

  

Concrete and Masonry Construction Assemblies

318-08

Building Code Requirements for Structural Concrete

530-08

Building Code Requirements for Masonry Structures

530.1 -08

Specifications for Masonry Structures

American Forest & Paper Association

1111 19th St, NW Suite 800

Washington, DC 20036

AF&PA

  

Standard

  

reference

  

number

Title

WCD No. 4-03

Wood Construction Data-Plank and Beam

  

Framing for Residential

NDS-05

National Design Specification (NDS) for

  

Wood Construction with 2005 Supplement

AF&PA-93

Span Tables for Joists and Rafters

ANSI/AF&PA PWF-07

Permanent Wood Foundation Design

  

Specification

ANSI/AF&PA SDPWS-08

Special Design Provisions for Wind and

  

Seismic

American Institute of Steel Construction

One East Wacker Drive, Suite 3100

Chicago, IL 60601-2001

AISC

  

Standard

  

reference

  

number

Title

341-05

Seismic Provisions for Structural Steel Buildings, including

  

Supplement No. 1 dated 2005

360-05

Specification for Structural Steel Buildings

American Iron and Steel Institute

1140 Connecticut Avenue

Suite 705 Washington, DC 20036

AISI

  

Standard

  

reference

  

number

Title

S100-07

North American Specification for the Design of Cold-

  

formed Steel Structural Members

S200-08

North American Standard for Cold-formed Steel

  

Framing-General

S210-08

North American Standard for Cold-formed Steel

  

Framing-Floor and Roof System Design

S211-08

North American Standard for Cold-formed Steel

  

Framing-Wall Stud

S212-08

North American Standard for Cold-formed Steel

  

Framing-Header Design

S213-08

North American Standard for Cold-formed Steel

  

Framing-Lateral Design

S214-08

North American Standard for Cold-formed Steel

  

Framing-Truss Design, with Supplement 2, dated 2008

American Institute of Timber Construction

Suite 140

7012 S. Revere Parkway

Englewood, CO 80112

AITC

  

Standard

  

reference

  

number

Title

AITC Technical

  

Note 7-96

Calculation of Fire Resistance of Glued Laminated

  

Timbers

AITC 104-03

Typical Construction Details

AITC 110-01

Standard Appearance Grades for Structural Glued

  

Laminated

AITC 113-01

Standard for Dimensions of Structural Glued

  

Laminated Timber

AITC 117-04

Standard Specifications for Structural Glued

  

Laminated Timber of Softwood Species

AITC 119-96

Standard Specifications for Structural Glued

  

Laminated Timber of Hardwood

AITC200-09

Manufacturing Quality Control Systems Manual for

  

Structural Glued Laminated Timber

ANSI/AITCA 190.1 -07

Structural Glued Laminated Timber

Automotive Lift Institute

P.O. Box 85

Courtland, NY 13045

ALI

  

Standard

  

reference

  

number

Title

ALI ALCTV-2007

Standard for Automobile Lifts-Safety

  

Requirements for Construction, Testing and

  

Validation (ANSI)

American National Standards Institute

25 West 43rd Street, Fourth Floor

New York, NY 10036

ANSI

  

Standard

  

reference

  

number

Title

A 13.1 -07

Scheme for the Identification of Piping Systems

A 108.1 A-09

Installation of Ceramic Tile in the Wet-set Method, with

  

Portland Cement

A 108.1 B-09

Installation of Ceramic Tile, quarry Tile on a Cured

  

Portland Cement Mortar Setting Bed with Dry-set orLatex-

A 108.4 -09

Installation of Ceramic Tile with Organic Adhesives or

  

Water-cleanable Tile-setting Epoxy Adhesive

A 108.5 -09

Installation of Ceramic Tile with Dry-set Portland Cement

  

Mortar or Latex-portland Cement Mortar

A 108.6 -09

Installation of Ceramic Tile with Chemical-resistant,Water

  

Cleanable Tile-setting and -grouting Epoxy

A 108.8 -09

Installation of Ceramic Tile with Chemical-resistant Furan

  

Resin Mortar and Grout

A 108.9 -09

Installation of Ceramic Tile with Modified Epoxy

  

Emulsion Mortar/Grout

A 108.10 -09

Installation of Grout in Tilework

A 118.1 -10.1

American National Standard Specifications for Dry-set

  

Portland Cement

A 118.3 -10.1

American National Standard Specifications for Chemical-

  

resistant, Water-cleanable Tile-setting and -grouting Epoxy

  

and Water Cleanable Tile-setting Epoxy

A 118.4 -10.1

American National Standard Specifications for Latex-

  

portland Cement

A 118.5 -10.1

American National Standard Specifications for Chemical

  

Resistant Furan Mortar and Grouts for Tile

A 118.8 -10.1

American National Standard Specifications for Modified

  

Epoxy Emulsion Mortar/Grout

A 136.1 -10.1

American National Standard Specifications for Organic

  

Adhesives for Installation of Ceramic

137.1 -08

American National Standard Specifications for Ceramic

A 208.1 -09

Particleboard

Z 97.1 -09

Safety Glazing Materials Used in Buildings-Safety

  

Performance Specifications and Methods of Test

APA - Engineered Wood Association

7011 South 19th

Tacoma, WA 98466

APA

  

Standard

  

reference

  

number

Title

APA PDS-08

Panel Design Specification

APA PDS

  

Supplement 1-90

Design and Fabrication of Plywood Curved Panels (revised

  

1995)

APA PDS

  

Supplement 2-92

Design and Fabrication of Plywood-lumber Beams (revised

  

1998

APA PDS

  

Supplement 3-96

Design and Fabrication of Plywood Stressed-skin Panels

  

(revised 1996

APA PDS

  

Supplement 4-93

Design and Fabrication of Plywood Sandwich Panels

  

(revised 1993)

APA PDS

  

Supplement 5-95

Design and Fabrication of All-plywood Beams (revised

  

1995

EWS R540-07

Builders Tips: Proper Storage and Handling of Glulam

  

Beams

EWS S475-07

Glued Laminated Beam Design Tables

EWS S560-10

Field Notching and Drilling of Glued Laminated Timber

  

Beams

EWS T300-07

Glulam Connection

EWS X440-08

Product Guide- Glulam

EWS X450-01

Glulam in Residential Construction-Western Edition

The Association of Pool & Spa Professionals

2111 Eisenhower Avenue

Alexandria, VA 22314

APSP Standard reference number

Title

ANSI/APSP 7-06

Standard for Suction Entrapment Avoidance in Swimming Pools, Wading Pools, Spas, Hot Tubs and Catch Basins

American Society of Agricultural and Biological Engineers

2950 Niles Road

St. Joseph, MI 49085

ASABE

  

Standard

  

reference

  

number

Title

EP 484.2-98

Diaphragm Design of Metal-clad, Post-frame Rectangular

  

Buildings

EP 486.1-99

Shallow-post Foundation Design

EP 559 -03

Design Requirements and Bending Properties for

  

Mechanically Laminated Columns

American Society of Civil Engineers

Structural Engineering Institute

1801 Alexander Bell Drive

Reston, VA 20191-4400

ASCE/SEI

  

Standard

  

reference

  

number

Title

3-91

Structural Design of Composite Slabs

5-08

Building Code Requirements for Masonry

6-08

Specification for Masonry Structures

7-05

Minimum Design Loads for Buildings and Other Structures

  

including Supplements No. 1 and 2, excluding Chapter 14 and

  

Appendix 11A

8-02

Standard Specification for the Design of Cold-formed Stainless

  

Steel Structural Members

19-10

Structural Applications of Steel Cables for Buildings

24-05

Flood Resistant Design and Construction

29-05

Standard Calculation Methods for Structural Fire Protection

32-01

Design and Construction of Frost Protected Shallow Foundations

American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.

1791 Tullie Circle, NE

Atlanta, GA 30329-2305

ASHRAE

  

Standard

  

Reference

  

Number

Title

ASHRAE 90.1 -2007

Energy Standard for Buildings Except Low-Rise Buildings

American Society of Mechanical Engineers

Three Park Avenue

New York, NY 10016-5990

ASME

  

Standard

  

reference

  

number

Title

A 17.1 /CSA B44-2010

Safety Code for Elevators and Escalators

A 18.1 -2008

Safety Standard for Platform Lifts and Stairway

  

Chairlifts

A 90.1 -2009

Safety Standard for Belt Manlifts

B 16.18 -2001

  

(Reaffirmed 2005)

Cast Copper Alloy Solder Joint Pressure Fittings

B 16.22 -2001

  

(Reaffirmed 2005)

Wrought Copper and Copper Alloy Solder Joint

  

Pressure Fittings

B 20.1 -2009

Safety Standard for Conveyors and Related

  

Equipment

B 31.3 -2008

Process Piping

ASTM International

100 Barr Harbor Drive

West Conshohocken, PA 19428-2959

ASTM

  

Standard

  

reference

  

number

Title

A 36/A 36M-08

Specification for Carbon Structural Steel

A 153/A 153M-09

Specification for Zinc Coating (Hot-dip) on Iron

  

and Steel Hardware

A 240/A 240M-10a

Standard Specification for Chromium and

  

Chromium-nickel Stainless Steel Plate,

  

Sheet and Strip for Pressure Vessels and for

  

General Applications

A 252-10

Specification for Welded and Seamless Steel Pipe

  

Piles

A 283/A 283M-03(2007)

Specification for Low and Intermediate Tensile

  

Strength Carbon Steel Plates

A 307-07b

Specification for Carbon Steel Bolts and Studs,

  

60,000 psi Tensile Strength

A 416/A 416M-10

Specification for Steel Strand, Uncoated Seven-wire

  

for Prestressed Concrete

A 463/A 463M-09a

Standard Specification for Steel Sheet, Aluminum-

  

coated, by the Hot-dip Process

A 572/A 572M-07

Specification for High-strength Low-alloy

  

Columbium-vanadium Structural Steel

A 588/A 588M-10

Specification for High-strength Low-alloy

  

Structural Steel with 50 ksi (345 MPa)

  

Minimum Yield Point to 4 inches (100 mm) Thick

A 615/A 615M-09b

Specification for Deformed and Plain Billet-steel

  

Bars for Concrete Reinforcement

A 653/A 653M-09a

Specification for Steel Sheet, Zinc-coated

  

Galvanized or Zinc-iron Alloy-coated

  

Galvannealed by the Hot-dip Process

A 690/A 690M-07

Standard Specification for High-strength Low-alloy

  

Nickel, Copper, Phosphorus Steel H-piles and

  

Sheet Piling with Atmospheric Corrosion

  

Resistance for Use in Marine Environments

A 706/A 706M-09b

Specification for Low-alloy Steel Deformed and

  

Plain Bars for

  

Concrete Reinforcement

A 722/A 722M-07

Specification for Uncoated High-strength Steel Bar

  

for Prestressing

A 755/A 755M-03(2008)

Specification for Steel Sheet, Metallic-coated by the

  

Hot-dip Process and Prepainted by the

  

Coil-coating Process for Exterior Exposed Building

  

Products

A 792/A 792M-09a

Specification for Steel Sheet, 55% Aluminum-zinc

  

Alloy-coated by the Hot-dip Process

A 875/A 875M-09a

Standard Specification for Steel Sheet Zinc-5

  

percent, Aluminum Alloy-coated by the Hot-dip

  

Process

A 913/A 913M-07

Specification for High-strength Low-alloy Steel

  

Shapes of Structural Quality, Produced by

  

Quenching and Self-tempering Process (QST)

A 924/A 924M-10

Standard Specification for General Requirements

  

for Steel Sheet, Metallic-coated by the Hot-dip

  

Process

A 992/A 992M-06a

Standard Specification for Structural Shapes

B 42-10

Specification for Seamless Copper Pipe, Standard

B 43-09

Specification for Seamless Red Brass Pipe,

  

Standard Sizes

B 68-02

Specification for Seamless Copper Tube, Bright

  

Annealed (Metric

B 88-09

Specification for Seamless Copper Water Tube

B 101-07

Specification for Lead-coated Copper Sheet and

  

Strip for Building Construction

B 209-07

Specification for Aluminum and Aluminum Alloy

  

Steel and Plate

B 251-10

Specification for General Requirements for

  

Wrought Seamless Copper and Copper-alloy Tube

B 280-08

Specification for Seamless Copper Tube for Air

  

Conditioning and Refrigeration Field Service

B 370-09

Specification for Cold-rolled Copper Sheet and

  

Strip for Building Construction

B 695-04(2009)

Standard Specification for Coatings of Zinc

  

Mechanically Deposited on Iron and Steel

C 5-10

Specification for Quicklime for Structural

C 22/C 22M-00 (2005)e01

Specification for Gypsum

C 27-98 (2008)

Specification for Standard Classification of Fireclay

  

and High-alumina Refractory Brick

C 28/C 28M-10

Specification for Gypsum

C 31/C 31M-10

Practice for Making and Curing Concrete Test

  

Specimens in the Field

C 33-08

Specification for Concrete Aggregates

C 34-10

Specification for Structural Clay Load-bearing Wall Tile

C 35-01(2009)

Specification for Inorganic Aggregates for Use in

  

Gypsum Plaster

C 36/C 36M-03

Specification for Gypsum Wallboard

C 37/C 37M-01

Specification for Gypsum Lath

C 55-09

Specification for Concrete Building Brick

C 56-10

Specification for Structural ClayNonloadBearing Tile

C 59/C 59M-00 (2006)

Specification for Gypsum Casting and Molding

  

Plaster

C 61/C 61M-00 (2006)

Specification for Gypsum Keene's

C 62-10

Specification for Building Brick (Solid Masonry

  

Units Made from Clay or Shale

C 67-09

Test Methods of Sampling and Testing Brick and

  

Structural Clay

C 73-05

Specification for Calcium Silicate Face Brick

  

(Sand-lime Brick)

C 79-04a

Specification for Treated Core and Nontreated Core

  

Gypsum Sheathing Board

C 90-09

Specification for Loadbearing Concrete Masonry

  

Units

C 91-05

Specification for Masonry Cement

C 94/C 94M-10

Specification for Ready-mixed

C 126-10

Specification for Ceramic Glazed Structural Clay

  

Facing Tile, Facing Brick and Solid Masonry Units

C 140-10

Test Method Sampling and Testing Concrete

  

Masonry Units and Related Units

C 150-09

Specification for Portland Cement

C 172-10

Practice for Sampling Freshly Mixed

C 199-84 (2005)

Test Method for Pier Test for Refractory Mortars

C 206-03 (2009)

Specification for Finishing Hydrated Lime

C 208-08a

Specification for Cellulosic Fiber Insulating Board

C 212-10

Specification for Structural Clay Facing Tile

C 216-10

Specification for Facing Brick (Solid Masonry

  

Units Made from Clay or Shale

C 270-10

Specification for Mortar for Unit Masonry

C 315-07

Specification for Clay Flue Liners and Chimney Pots

C 317/C 317M-00 (2005)

Specification for Gypsum Concrete

C 330-09

Specification for Lightweight Aggregates for

  

Structural Concrete

C 331-05

Specification for Lightweight Aggregates for

  

Concrete Masonry Units

C 406-10

Specification for Roofing Slate

C 442/C 442M-04

Specification for Gypsum Backing Board and

  

Coreboard and Gypsum Shaftliner Board

C 472-99 (2009)

Specification for Standard Test Methods for

  

Physical Testing of Gypsum, Gypsum Plasters and

  

Gypsum Concrete

C 473-10

Test Method for Physical Testing of Gypsum Panel

  

Products

C 474-05

Test Methods for Joint Treatment Materials for

  

Gypsum Board Construction

C 475-02 (2007)

Specification for Joint Compound and Joint Tape

  

for Finishing Gypsum Wallboard

C 503-10

Specification for Marble Dimension Stone (Exterior

C 514-04 (2009)e1

Specification for Nails for the Application of

  

Gypsum

C 516-08

Specifications for Vermiculite Loose Fill Thermal

C 547-07e1

Specification for Mineral Fiber Pipe Insulation

C 549-06

Specification forPerliteLoose Fill

C 552-07

Standard Specification for Cellular Glass Thermal

  

Insulation

C 557-03(2009)e01

Specification for Adhesives for Fastening Gypsum

  

Wallboard to Wood Framing

C 568-10

Specification for Limestone Dimension Stone

C 578-10

Standard Specification for Rigid, Cellular

  

Polystyrene Thermal Insulation

C 587-04 (2009)

Specification for Gypsum Veneer Plaster

C 588/C 588M-01

Specification for Gypsum Base for Veneer Plasters

C 595-10

Specification for Blended Hydraulic Cements

C 615-10

Specification for Granite Dimension

C 616-10

Specification for Quartz Dimension Stone

C 629-10

Specification for Slate Dimension

C 630/C 630M-03

Specification for Water-resistant Gypsum Backing

  

Board

C 631-09

Specification for Bonding Compounds for Interior

  

Gypsum Plastering

C 635/C 635M-07

Specification for the Manufacture, Performance and

  

Testing of Metal Suspension Systems for Acoustical

  

Tile and Lay-in Panel

C 636/C 636M-08

Practice for Installation of Metal Ceiling

  

Suspension Systems for Acoustical Tile and Lay-in

  

Panels

C 645-09a

Specification for Nonstructural Steel Framing

  

Members

C 652-10

Specification for Hollow Brick (Hollow Masonry

  

Units Made from Clay or Shale

C 728-05 (2010)

Standard Specification forPerliteThermal Insulation

  

Board

C 744-10

Specification for Prefaced Concrete and Calcium

  

Silicate Masonry

C 754-09a

Specification for Installation of Steel Framing

  

Members to Receive Screw-attached Gypsum Panel

  

Products

C 836/C 836M-10

Specification for High-solids Content, Cold Liquid-

  

applied Elastomeric Waterproofing Membrane for

  

Use with Separate Wearing Course

C 840-08

Specification for Application and Finishing of

  

Gypsum Board

C 841-03 (2008)e1

Specification for Installation of Interior Lathing and

  

Furring

C 842-05

Specification for Application of Interior Gypsum

  

Plaster

C 843-99 (2006)

Specification for Application of Gypsum Veneer

  

Plaster

C 844-10

Specification for Application of Gypsum Base to

  

Receive Gypsum Veneer Plaster

C 847-10a

Specification for Metal Lath

C 887-05 (2010)

Specification for Packaged, Dry Combined

  

Materials for Surface Bonding Mortar

C 897-05 (2009)

Specification for Aggregate for Job-mixed Portland

  

Cement-based Plaster

C 920-10

Standard for Specification forElastomericJoint

  

Sealants

C 926-06

Specification for Application of Portland Cement-

  

based Plaster

C 931/C 931M-04

Specification for Exterior Gypsum Soffit Board

C 932-06

Specification for Surface-applied Bonding

  

Compounds Agents for Exterior Plastering

C 933-09

Specification for Welded Wire Lath

C 946-10

Specification for Practice for Construction of Dry-

  

stacked, Surface-bonded Walls

C 954-10

Specification for Steel Drill Screws for the

  

Application of Gypsum Panel Products or Metal

  

Plaster Bases to Steel Studs from 0.033 inch ( 0.84

  

mm) to 0.112 inch ( 2.84 mm) in Thickness

C 955-09a

Standard Specification for Load-bearing Transverse

  

and Axial Steel Studs, Runners Tracks, and Bracing

  

or Bridging, for Screw Application of Gypsum

  

Panel Products and Metal Plaster Bases

C 956-04 (2010)

Specification for Installation of Cast-in-place

  

Reinforced Gypsum

C 957-10

Specification for High-solids Content, Cold Liquid-

  

applied Elastomeric Waterproofing Membrane with

  

Integral Wearing Surface

C 960-04

Specification forPredecoratedGypsum Board

C 1002-07

Specification for Steel Self-piercing Tapping

  

Screws for the Application of Gypsum Panel

  

Products or Metal Plaster Bases to Wood Studs or

  

Steel Studs

C 1007-08a

Specification for Installation of Load Bearing

  

(Transverse and Axial) Steel Studs and Related

  

Accessories

C 1019-09

Test Method of Sampling and Testing Grout

C 1029-10

Specification for Spray-applied Rigid Cellular

  

Polyurethane Thermal Insulation

C 1032-06

Specification for Woven Wire Plaster Base

C 1047-10a

Specification for Accessories for Gypsum

  

Wallboard and Gypsum Veneer

C 1063-08

Specification for Installation of Lathing and Furring

  

to Receive Interior and Exterior Portland Cement-

  

based Plaster

C 1088-10

Specification for Thin Veneer Brick Units Made

  

from Clay or Shale

C 1167-03 (2009)

Specification for Clay Roof Tiles

C 1177/C 1177M-08

Specification for Glass Mat Gypsum Substrate for

  

Use as Sheathing

C 1178/C 1178M-08

Specification for Coated Glass Mat Water-resistant

  

Gypsum Backing Panel

C 1186-08

Specification for Flat-Fiber Cement Sheets

C 1261-10

Specification for Firebox Brick for Residential

  

Fireplaces

C 1278/C 1278M-07a

Specification for Fiber-reinforced Gypsum Panels

C 1280-09

Specification for Application of Gypsum Sheathing

C 1283-07a

Practice for Installing Clay Flue Lining.

C 1288-99 (2010)

Standard Specification for Discrete Nonasbestos

  

Fiber-cement Interior Substrate Sheets

C 1289-10

Standard Specification for Faced Rigid Cellular

  

Polyisocyanurate Thermal Insulation Board

C 1314-10

Test Method for Compressive Strength of Masonry

  

Prisms

C 1325-08b

Standard Specification for Nonasbestos Fiber-mat

  

Reinforced Cement Interior Substrate Sheets

C 1328-05

Specification for Plastic (Stucco Cement

C 1386-07

Specification for Precast Autoclaved Aerated

  

Concrete (AAC) Wall Construction

C 1395/C 1395M-06a

Specification for Gypsum Ceiling Board

C 1396M-09a

Specification for Gypsum Board

C 1405-10

Standard Specification for Glazed Brick (Single

  

Fired, Solid Brick Units

C 1492-03 (2009)

Standard Specification for Concrete Roof

C 1629/C 1629M-06

Standard Classification for Abuse-resistant

  

Nondecorated Interior Gypsum Panel Products and

  

Fiber-reinforced Cement Panels

C 1658/C 1658M-06

Standard Specification for Glass Mat Gypsum

  

Panels

D 25-99 (2005)

Specification for Round Timber Piles

D 41-05 (2010)

Specification for Asphalt Primer Used in Roofing,

  

Dampproofing and Waterproofing

D 43-00 (2006)

Specification for Coal Tar Primer Used in Roofing,

  

Dampproofing and Waterproofing

D 56-05

Test Method for Flash Point By Tag Closed Tester

D 86-10a

Test Method for Distillation of Petroleum Products

  

at Atmospheric Pressure

D 93-10

Test Method for Flash Point ByPensky-

  

MartensClosed Cup Tester

D 225-07

Specification for Asphalt Shingles (Organic Felt)

  

Surfaced with Mineral Granules

D 226/D 226M-09

Specification for Asphalt-saturated Organic Felt

  

Used in Roofing and Waterproofing

D 227-03

Specification for Coal-tar-saturated Organic Felt

  

Used in Roofing and Waterproofing

D 312-00 (2006)

Specification for Asphalt Used in

D 422-63 (2007)

Test Method for Particle-size Analysis of Soils

D 448-08

Standard Classification for Sizes of Aggregate for

  

Road and Bridge

D 450-07

Specification for Coal-tar Pitch Used in Roofing,

  

Dampproofing and Waterproofing

D 635-10

Test Method for Rate of Burning and/or Extent and

  

Time of Burning of Self-supporting Plastics in a

  

Horizontal Position

D 1143/D 1143M-07e1

Test Method for Piles Under Static Axial

  

Compressive Load

D 1227-95 (2007)

Specification for Emulsified Asphalt Used as a

  

Protective Coating for Roofing

D 1557-09

Test Method for Laboratory Compaction

  

Characteristics of Soil Using Modified Effort

  

[56,000 ft-lb/ft3 (2,700 KN m/m3)]

D 1586-08a

Specification for Penetration Test and Split-barrel

  

Sampling of Soils

D 1761-06

Test Method for Mechanical Fasteners in Wood

D 1863-05

Specification for Mineral Aggregate Used on Built-

  

up Roofs

D 1929-96 (2001)e01

Test Method for Determining Ignition Properties of

  

Plastics

D 1970-09

Specification for Self-adhering Polymer Modified

  

Bituminous Sheet Materials Used as Steep Roof

  

Underlayment for Ice Dam Protection

D 2166-06

Test Method for Unconfined Compressive Strength

  

of Cohesive Soil

D 2178-04

Specification for Asphalt Glass Felt Used in

  

Roofing and Waterproofing

D 2216-10

Test Method for Laboratory Determination of Water

  

(Moisture) Content of Soil and Rock by Mass

D 2487-10

Practice for Classification of Soils for Engineering

  

Purposes (Unified Soil Classification System)

D 2626-04

Specification for Asphalt Saturated and Coated

  

Organic Felt Base Sheet Used in Roofing

D 2822-05

Specification for Asphalt Roof Cement

D 2823-05

Specification for Asphalt Roof Coatings

D 2843-10

Test for Density of Smoke from the Burning or

  

Decomposition of Plastics

D 2850-03a (2007)

Test Method for Unconsolidated, Undrained

  

Triaxial Compression Test on Cohesive Soils

D 2898-10

Test Methods for Accelerated Weathering of Fire-

  

retardant-treated Wood for Fire Testing

D 3019-08

Specification for Lap Cement Used with Asphalt

  

Roll Roofing, Nonfibered, Asbestos Fibered and

  

NonasbestosFibered

D 3161-09

Test Method for a Wind Resistance of Asphalt

  

Shingles (Fan Induced Method)

D 3200-74 (2005)

Standard Specification and Test Method for

  

Establishing Recommended Design Stresses for

  

Round Timber Construction Poles

D 3201-08ae1

Test Method for Hygroscopic Properties of Fire-

  

retardant-treated Wood and Wood-based Products

D 3278-96(2004)e01

Test Methods for Flash Point of Liquids by Small

  

Scale Closed-cup Apparatus

D 3462/ D3462M-10a

Specification for Asphalt Shingles Made from Glass

  

Felt and Surfaced with Mineral Granules

D 3468-99 (2006)e1

Specification for Liquid-applied Neoprene and

  

Chlorosulfonated Polyethylene Used in Roofing and

  

Waterproofing

D 3679-09a

Specification for Rigid Poly [Vinyl Chloride (PVC)

  

Siding]

D 3689-07

Method for Testing Individual Piles Under Static

  

Axial Tensile Load

D 3737-09

Practice for Establishing Allowable Properties for

  

Structural Glued Laminated Timber (Glulam)

D 3746-85 (2008)

Test Method for Impact Resistance of Bituminous

  

Roofing Systems

D 3747-79 (2007)

Specification for Emulsified Asphalt Adhesive for

  

Adhering Roof Insulation

D 3909-97b (2004)e01

Specification for Asphalt Roll Roofing (Glass Felt)

  

Surfaced with Mineral Granules

D 3957-09

Standard Practices for Establishing Stress Grades

  

for Structural Members Used in Log Buildings

D 4022-07

Specification for Coal Tar Roof Cement, Asbestos

  

Containing

D 4272-09

Test Method for Total Energy Impact of Plastic

  

Films by Dart Drop

D 4318-10

Test Methods for Liquid Limit, Plastic Limit and

  

Plasticity Index of Soils

D 4434/D 4434M-09

Specification for Poly (Vinyl Chloride) Sheet

  

Roofing

D 4479-07

Specification for Asphalt Roof Coatings-

  

Asbestos-free

D 4586-07

Specification for Asphalt Roof Cement-Asbestos-free

D 4601-04

Specification for Asphalt-coated Glass Fiber Base

  

Sheet Used in Roofing

D 4637/D 4637M-10

Specification forEPDMSheet Used in Single-ply

  

Roof Membrane

D 4829-08a

Test Method for Expansion Index of Soils

D 4869-05e01

Specification for Asphalt-saturated (Organic Felt)

  

Underlayment Used in Steep Slope Roofing

D 4897/D 4897M-01(2009)

Specification for Asphalt-coated Glass Fiber

  

Venting Base Sheet Used in Roofing

D 4945-08

Test Method for High-strain Dynamic Testing of

  

Piles

D 4990-97a (2005)e1

Specification for Coal Tar Glass Felt Used in

  

Roofing and Waterproofing.

D 5019-07a

Specification for Reinforced Nonvulcanized

  

Polymeric Sheet Used in Roofing Membrane

D 5055-10

Specification for Establishing and Monitoring

  

Structural Capacities of Prefabricated Wood I-joists

D 5456-10

Specification for Evaluation of Structural

  

Composite Lumber Products

D 5516-09

Test Method of Evaluating the Flexural Properties

  

of Fire-retardant-treated Softwood Plywood

  

Exposed to the Elevated Temperatures

D 5643-06

Specification for Coal Tar Roof Cement, Asbestos-

  

free

D 5664-10

Test Methods for Evaluating the Effects of Fire-

  

retardant Treatment and Elevated Temperatures on

  

Strength Properties of Fire-retardant-treated Lumber

D 5665-99a (2006)

Specification for Thermoplastic Fabrics Used in

  

Cold-applied Roofing and Waterproofing

D 5726-98 (2005)

Specification for Thermoplastic Fabrics Used in

  

Hot-applied Roofing and Waterproofing .

D 6083-05e01

Specification for Liquid Applied Acrylic Coating

  

Used in Roofing

D 6162-00a (2008)

Specification for Styrene-butadiene-styrene (SBS)

  

Modified Bituminous Sheet Materials Using a

  

Combination of Polyester and Glass Fiber

  

Reinforcements

D 6163-00 (2008)

Specification for Styrene-butadiene-styrene (SBS)

  

Modified Bituminous Sheet Materials Using Glass

  

Fiber Reinforcements

D 6164-05 e1

Specification for Styrene-butadiene-styrene (SBS)

  

Modified Bituminous Sheet Metal Materials Using

  

Polyester Reinforcements

D 6222-08

Specification for Atactic Polypropylene (APP)

  

Modified Bituminous Sheet Materials Using

  

Polyester Reinforcements

D 6223/D6223M-02(2009)e1

Specification for Atactic Polypropylene (APP)

  

Modified Bituminous Sheet Materials Using a

  

Combination of Polyester and Glass Fiber

  

Reinforcements

D 6298-05e1

Specification for Fiberglass Reinforced Styrene-

  

butadiene-styrene (SBS) Modified Bituminous

  

Sheets with a Factory Applied Metal Surface

D 6305-08

Practice for Calculating Bending Strength Design

  

Adjustment Factors for Fire-retardant-treated

  

Plywood Roof Sheathing

D 6380-03 (2009)

Standard Specification for Asphalt Roll Roofing

  

(Organic) Felt

D 6509/D6509M-09

Standard Specification for Atactic Polypropylene

  

(APP) Modified Bituminous base Sheet Materials

  

Using Glass Fiber Reinforcements

D 6694-08

Standard Specification for Liquid-applied Silicone

  

Coating Used in Spray Polyurethane Foam Roofing

D 6754/D6754M-10

Standard Specification for Ketone Ethylene Ester

  

Based Sheet Roofing

D 6757-07

Standard Specification for Inorganic Underlayment

  

for Use with Steep Slope Roofing Products

D 6841-08

Standard Practice for Calculating Design Value

  

Treatment Adjustment Factors for Fire-retardant-

  

treated Lumber

D 6878-08e1

Standard Specification for Thermoplastic Polyolefin

  

Based Sheet Roofing

D 6947-07

Standard Specification for Liquuid Applied

  

Moisture Cured Polyurethane Coating Used in

  

Spray Polyurethane Foam Roofing System

D 7158-08d

Standard Test Method for Wind Resistance of

  

Sealed Asphalt Shingles (Uplift Force/Uplift

  

Resistance Method

E 84-10b

Test Methods for Surface Burning Characteristics of

  

Building Materials

E 90-09

Test Method for Laboratory Measurement of

  

Airborne Sound Transmission Loss of Building

  

Partitions and Elements

E 96/E 96M-05

Test Method for Water Vapor Transmission of

  

Materials

E 108-10a

Test Methods for Fire Tests of Roof Coverings

E 119-10b

Test Methods for Fire Tests of Building

  

Construction and Materials

E 136-09b

Test Method for Behavior of Materials in a Vertical

  

Tube Furnace at 750°C

E 330-02 (2010)

Test Method for Structural Performance of Exterior

  

Windows, Curtain Walls and Doors by Uniform

  

Static Air Pressure Difference

E 331-00 (2009)

Test Method for Water Penetration of Exterior

  

Windows, Skylights, Doors and Curtain Walls by

  

Uniform Static Air Pressure Difference

E 492-09

Test Method for Laboratory Measurement of Impact

  

Sound Transmission Through Floor-ceiling

  

Assemblies Using the Tapping Machine

E 605-93 (2006)

Test Method for Thickness and Density of Sprayed

  

Fire-resistive Material (SFRM) Applied to

  

Structural Members.

E 681-09

Test Methods for Concentration Limits of

  

Flammability of Chemical Vapors and Gases

E 736-00 (2006)

Test Method for Cohesion/Adhesion of Sprayed

  

Fire-resistive Materials Applied to Structural

  

Members

E 814-10

Test Method of Fire Tests of Through-penetration

  

Firestops

E 970-10

Test Method for Critical Radiant Flux of Exposed

  

Attic Floor Insulation Using a Radiant Heat Energy

  

Source

E 1300-09a

Practice for Determining Load Resistance of Glass

  

in Buildings.

E 1354-10a

Standard Test Method for Heat and Visible Smoke

  

Release Rates for Materials and Products Using an

  

Oxygen Consumption Calorimeter

E 1592-05

Test Method for Structural Performance of Sheet

  

Metal Roof and Siding Systems by Uniform Static

  

Air Pressure Difference

E 1602-03 (2010)e1

Guide for Construction of Solid Fuel-burning

  

Masonry Heaters

E 1886-05

Test Method for Performance of Exterior Windows,

  

Curtain Walls, Doors and Storm Shutters Impacted

  

by Missiles and Exposed to Cyclic Pressure

  

Differentials

E 1966-07

Test Method for Fire-resistant Joint Systems.

E 1996-09

Specification for Performance of Exterior Windows,

  

Glazed Curtain Walls, Doors and Impact Protective

  

Systems Impacted by Windborne Debris in

  

Hurricanes

E 2072-10

Standard Specification for Photoluminescent

  

(Phosphorescent) Safety Markings

E 2273-03

Standard Test Method for Determining the Drainage

  

Efficiency of Exterior Insulation and Finish

  

Systems (EIFS) Clad Wall Assemblies

E 2307-10

Standard Test Method for Determining Fire

  

Resistance of Perimeter Fire Barrier Systems Using

  

Intermediate-scale, Multistory Test Apparatus

E 2404-10

Standard Practice for Specimen Preparation and

  

Mounting of Textile, Paper or Vinyl Wall or Ceiling

  

Coverings to Assess Surface Burning

  

Characteristics

E 2568-09e1

Standard Specification for PB Exterior Insulation

  

and Finish Systems (EIFS)

E 2570-07

Standard Test Method for Evaluating Water-

  

resistive Barrier (WRB) Coatings Used Under

  

Exterior Insulation and Finish Systems (EIFS) for

  

EIFS with Drainage

E 2573-07a

Standard Practice for Specimen Preparation and

  

Mounting of Site-fabricated Stretch Systems to

  

Assess Surface Burning Characteristics

F 547-06

Terminology of Nails for Use with Wood and

  

Wood-based Materials

F 1346-91 (2003)

Performance Specification for Safety Covers and

  

Labeling Requirements for All Covers for

  

Swimming Pools, Spas and Hot Tubs

F 1667-10

Specification for Driven Fasteners: Nails, Spikes

  

and Staples

F 2006-10

Standard/Safety Specification for Window Fall

  

Prevention Devices for NonemergencyEscape

  

(Egress) and Rescue (Ingress) Windows

F 2090-10

Specification for Window Fall Prevention Devices

  

with Emergency Escape (Egress) Release

  

Mechanisms

F 2200-05

Standard Specification for Automated Vehicular

  

Gate Construction

G 152-06

Practice for Operating Open Flame Carbon Arc

  

Light Apparatus for Exposure of Nonmetallic

  

Materials

G 154-06

Practice for Operating Fluorescent Light Apparatus

  

for UV Exposure of Nonmetallic Materials

G 155-05a

Practice for Operating Xenon Arc Light Apparatus

  

for Exposure of Nonmetallic Materials

The Association of the Wall and Ceiling Industries International

513 West Broad Street, Suite 210

Falls Church, VA 22046

AWCI

  

Standard

  

reference

  

number

Title

12-B-05

Technical Manual 12-B Standard Practice for the Testing and

  

Inspection of Field Applied Thin Film Intumescent Fire-resistive

  

Materials; an Annotated Guide, Second Edition

American Wood Protection Association

P.O. Box 361784

Birmingham, AL 35236-1784

AWPA

  

Standard

  

reference

  

number

Title

C1-03

All Timber Products-Preservative Treatment by Pressure

  

Processes

M4-06

Standard for the Care of Preservative-treated Wood Products

U1-10

USE CATEGORY SYSTEM: User Specification for Treated

  

Wood Except Section 6, Commodity Specification H

American Welding Society

550 N.W. LeJeune Road

Miami, FL 33126

AWS

  

Standard

  

reference

  

number

Title

D 1.1 -10

Structural Welding Code-Steel

D 1.3 -08

Structural Welding Code-Sheet Steel

D 1.4 -05

Structural Welding Code-Reinforcing Steel

Builders Hardware Manufacturers' Association

355 Lexington Avenue, 17th Floor

New York, NY 10017-6603

BHMA

  

Standard

  

reference

  

number

Title

A 156.10 -05

Power Operated Pedestrian Doors

A 156.19 -07

Standard for Power Assist and Low Energy Operated Doors

Canadian General Standards Board

Place du Portage 111, 6B1

11 Laurier Street

Gatineau, Quebec, Canada KIA 1G6

CGSB

  

Standard

  

Reference

  

Number

Title

37-GP-52M (1984)

Roofing and Waterproofing Membrane, Sheet

  

Applied, Elastomeric

37-GP-56M (1985)

Membrane, Modified, Bituminous, Prefabricated

  

and Reinforced for Roofing-with December 1985

  

Amendment

CAN/CGSB 37.54 -95

Polyvinyl Chloride Roofing and Waterproofing

  

Membrane

Composite Panel Association

19465 Deerfield Avenue, Suite 306

Leesburg, VA 20176

CPA

  

Standard

  

reference

  

number

Title

ANSI A 135.4 -2004

Basic Hardboard

ANSI A 135.5 -2004

Prefinished Hardboard Paneling

ANSI A 135.6 -2006

Hardboard Siding

Consumer Product Safety Commission

4330 East West Highway

Bethesda, MD 20814-4408

CPSC

  

Standard

  

reference

  

number

Title

16 CFR Part 1201(1977)

Safety Standard for Architectural Glazing

  

Material

16 CFR Part 1209(1979)

Interim Safety Standard for Cellulose

  

Insulation

16 CFR Part 1301(1977)

Ban of Unstable Refuse Bins

16 CFR Part 1404(1979)

Cellulose Insulation

16 CFR Part 1500(1991)

Hazardous Substances and Articles;

  

Administration and Enforcement

  

Regulations

16 CFR Part 1500.44(2001)

Method for Determining Extremely

  

Flammable and Flammable Solids

16 CFR Part 1507(2001)

Fireworks Devices

16 CFR Part 1630(2000)

Standard for the Surface Flammability of

  

Carpets and Rugs

Canadian Standards Association

5060 Spectrum Way, Suite 100

Mississauga, Ontario, L4W 5N6 Canada

CSA

  

Standard

  

reference

  

number

Title

101/I.S.2/A440-08

Specifications for Windows, Doors and Unit

  

Skylights

Cedar Shake and Shingle Bureau

P.O. Box 1178

Sumas, WA 98295-1178

CSSB

  

Standard

  

reference

  

number

Title

CSSB-97

Grading and Packing Rules for Western Red Cedar Shakes

  

and Western Red Shingles of the Cedar Shake and Shingle

  

Bureau

Door and Access Systems Manufacturers Association International

1300 Summer Avenue

Cleveland, OH 44115-2851

DASMA

  

Standard

  

reference

  

number

Title

ANSI/DASMA 107-1997

  

(R2004)

Room Fire Test Standard for Garage Doors Using

  

Foam Plastic Insulation

108-05

Standard Method for Testing Sectional Garage

  

Doors and Rolling Doors: Determination of

  

Structural Performance Under Uniform Static Air

  

Pressure Difference

115-05

Standard Method for Testing Sectional Garage

  

Doors and Rolling Doors: Determination of

  

Structural Performance Under Missile Impact and

  

Cyclic Wind Pressure

U.S. Department of Commerce

National Institute of Standards and Technology

1401 Constitution Avenue, NW

Washington, DC 20230

DOC

  

Standard

  

reference

  

number

Title

PS-1-07

Structural Plywood

PS-2-04

Performance Standard for Wood-based Structural-use

  

Panels

PS 20-05

American Softwood Lumber Standard

U.S. Department of Labor

c/o Superintendent of Documents

U.S. Government Printing Office

Washington, DC 20402-9325

DOL Standard reference number

Title

29 CFR Part 1910.1000(1974)

Air Contaminants

U.S. Department of Transportation

c/o Superintendent of Documents

1200 New Jersey Avenue, SE

Washington, DC 20402-9325

DOTn

  

Standard

  

reference

  

number

Title

49CFRParts 100 - 185 - 2005

Hazardous Materials Regulations

49 CFR Parts 173.137

  

(2005)

Shippers-General Requirements for Shipments

  

and Packaging-Class 8-Assignment of Packing

  

Group

49 CFR-1998

Specification of Transportation of Explosive and

  

Other Dangerous Articles,

  

UN 0335, UN 0336 Shipping Containers

European Committee for Standardization (EN)

Central Secretariat

Rue de Stassart 36

B-10 50 Brussels

EN

  

Standard

  

reference

  

number

Title

EN 1081-98

Resilient Floor Coverings-Determination of the Electrical

Resistance

  

Federal Emergency Management Agency

Federal Center Plaza

500 C Street S.W.

Washington, DC 20472

FEMA

  

Standard

  

reference

  

number

Title

FIA-TB11-01

Crawlspace Construction for Buildings Located in

  

Special Flood Hazard Areas

Factory Mutual Global Research

Standards Laboratories Department

1301 Atwood Avenue, P.O. Box 7500

Johnson, RI 02919

FM

  

Standard

  

reference

  

number

Title

4450 (1989)

Approval Standard for Class 1 Insulated Steel Deck

  

Roofs-with Supplements through July 1992

4470 (2010)

Approval Standard for Class 1 Roof Covers

4474 (04)

Evaluating the Simulated Wind Uplift Resistance of Roof

  

Assemblies Using Static Positive and/or Negative

  

Differential Pressures

4880 (2010)

American National Standard for Evaluating Insulated Wall

  

or Wall and Roof/ Ceiling Assemblies, Plastic Interior

  

Finish Materials, Plastic Exterior Building Panels,

  

Wall/Ceiling Coating Systems, Interior and Exterior Finish

  

Systems

Gypsum Association

810 First Street N.E. #510

Washington, DC 20002-4268

GA

  

Standard

  

reference

  

number

Title

GA 216-10

Application and Finishing of Gypsum Panel Products

GA 600-09

Fire-resistance Design Manual, 18th Edition

Hardwood Plywood Veneer Association

1825 Michael Faraday Drive

Reston, VA 20190-5350

HPVA

  

Standard

  

reference

  

number

Title

HP-1-2009

Standard for Hardwood and Decorative Plywood

U.S. Department of Housing and Urban Development

451 7th Street, SW,

Washington, DC 20410

HUD

  

Standard

  

reference

  

number

Title

HUD 24 CFR Part 3280(1994)

Manufactured Home Construction and

Safety Standards

  

International Code Council, Inc.

500 New Jersey Ave, NW 6th Floor

Washington, DC 20001

ICC

  

Standard

  

reference

  

number

Title

ICC/ANSI A 117.1 -09

Accessible and Usable Buildings and Facilities

ICC 300-07

ICC Standard on Bleachers, Folding and Telescopic

  

Seating and

ICC 400-07

Standard on Design and Construction of Log

  

Structures

ICC 500-08

ICC/NSSA Standard on the Design and

  

Construction of Storm

ICC 600-08

Standard for Residential Construction in High Wind

  

Regions

IEBC - 09

International Existing Buildings Code

IECC-09

International Energy Conservation Code (adoption

  

includes only section 101 of chapter 1 and chapters

  

2 through 6)

IFGC-09

International Fuel Gas Code (including ICC

  

Emergency Amendment changing IFGC Sections

  

406.7 )

SBCCI SSTD 11-99

Test Standard for Determining Wind Resistance of

  

Concrete or Clay Roof Tiles

International Organization for Standardization

ISO Central Secretariat,

1 ch, de la Voie-Creuse,

Case Postale 56

CH-1211 Geneva 20, Switzerland

ISO

  

Standard

  

reference

  

number

Title

ISO 8115-86

Cotton Bales-Dimensions and Density

National Association of Architectural Metal Manufacturers,

800 Roosevelt Road,

Bldg. C, Suite 312

Glen Ellyn, IL 60137

NAAMM

  

Standard

  

reference

  

number

Title

FP 1001-07

Guide Specifications for Design of Metal Flag Poles

National Concrete Masonry Association,

13750 Sunrise Valley,

Herndon, VA 22071-4662

NCMA

  

Standard

  

reference

  

number

Title

TEK5-08

Details for Concrete Masonry Fire Walls

National Fire Protection Association

1 Batterymarch Park

Quincy, MA 02269-9101

NFPA

  

Standard

  

reference

  

number

Title

10-10

Portable Fire Extinguishers

11-10

Low Expansion Foam

12-08

Carbon Dioxide Extinguishing Systems

12A-04

Halon 1301 Fire Extinguishing Systems

13-10

Installation of Sprinkler Systems (including TIA 10-2)

13D-10

Installation of Sprinkler Systems in One- and Two-

  

family Dwellings and Manufactured Homes

  

(including TIA 10-2)

13R-10

Installation of Sprinkler Systems in Residential

  

Occupancies Up to and Including Four Stories in

  

Height (including TIA 10-2)

14-10

Installation of Standpipe and Hose System

16-07

Installation of Foam-water Sprinkler and Foam-

  

water Spray Systems

17-09

Dry Chemical Extinguishing Systems

17A-09

Wet Chemical Extinguishing

20-10

Installation of Stationary Pumps for Fire Protection

30-08

Flammable and Combustible Liquids Code

31-06

Installation of Oil-burning Equipment

32-07

Dry Cleaning Plants

40-11

Storage and Handling of Cellulose Nitrate Film

58-11

Liquefied Petroleum Gas Code

61-08

Prevention of Fires and Dust Explosions in

  

Agricultural and Food Product Facilities

  

70-11

National Electrical Code (including TIA 11-1)

  

72-10

National Fire Alarm and SignalingCode

80-10

Fire Doors and Other Opening Protectives

85-07

Boiler and Combustion System Hazards Code

  

(Note: NFPA 8503 has been incorporated into

  

NFPA 85)

92B-09

Smoke Management Systems in Malls, Atria and

  

Large Spaces

99-05

Standard for Health Care Facilities

105-10

Standard for the Installation of Smoke Door

  

Assemblies

110-10

Emergency and Standby Power Systems

111-10

Stored Electrical Energy Emergency and Standby

  

Power Systems

120-10

Coal Preparation Plants

170-09

Standard for Fire Safety and Emergency Symbols

211-10

Chimneys, Fireplaces, Vents and Solid Fuel-

  

burning

252-08

Standard Methods of Fire Tests of Door Assemblies

253-06

Test for Critical Radiant Flux of Floor Covering

  

Systems Using a Radiant Heat Energy Source

257-07

Standard for Fire Test for Window and Glass Block

  

Assemblies

259-08

Test Method for Potential Heat of Building

  

Materials

265-07

Method of Fire Tests for Evaluating Room Fire

  

Growth Contribution of Textile Wall Coverings on

  

Full Height Panels and Walls

268-07

Standard Test Method for Determining Ignitibility

  

of Exterior Wall Assemblies Using a Radiant Heat

  

Energy Source

285-06

Standard Method of Test for the Evaluation of

  

Flammability Characteristics of Exterior Nonload-

  

bearingWall Assemblies Containing Combustible

  

Components

286-06

Standard Method of Fire Test for Evaluating

  

Contribution of Wall and Ceiling Interior Finish to

  

Room Fire Growth

288-07

Standard Method of Fire Tests of Floor Fire Door

  

Assemblies Installed Horizontally in Fire-

  

resistance-rated Floor Systems

409-11

Aircraft Hangars

418-06

Standard for Heliports

484-09

Combustible Metals

654-06

Prevention of Fire & Dust Explosions from the

  

Manufacturing, Processing and Handling of

  

Combustible Particulate Solids

655-07

Prevention of Sulfur Fires and Explosions

664-07

Prevention of Fires and Explosions in Wood

  

Processing and Woodworking Facilities

701-10

Standard Methods of Fire Tests for Flame-

  

propagation of Textiles and Films

704-07

Standard System for the Identification of the

  

Hazards of Materials for Emergency Response

1124-06

Manufacture, Transportation and Storage of

  

Fireworks and Pyrotechnic Articles

2001-08

Clean Agent Fire Extinguishing Systems

Precast Prestressed Concrete Institute

175 W. Jackson Boulevard, Suite 500

Chicago, IL 60604-6938

PCI

  

Standard

  

reference

  

number

Title

MNL 124-89

Design for Fire Resistance of Precast Prestressed

  

Concrete

MNL 128-01

Recommended Practice for Glass Fiber Reinforced

  

Concrete Panels

Post-Tensioning Institute

8601 North Black Canyon Highway, Suite 103

Phoenix, AZ 85021

PTI

  

Standard

  

reference

  

number

Title

PTI-2008

Standard Requirements for Analysis of Shallow Concrete

  

Foundations on Expansive Soils, Third Edition

PTI-2008

Standard Requirements for Design of Shallow Post-

  

tensioned Concrete Foundation on Expansive Soils, Second

  

Edition

Rack Manufacturers Institute

8720 Red Oak Boulevard, Suite 201

Charlotte, NC 28217

RMI

  

Standard

  

reference

  

number

Title

ANSI/MH 16.1 -08

Specification for Design, Testing and Utilization of

  

Industrial Steel Storage Racks

Steel Deck Institute,

P. O. Box 25

Fox River Grove, IL 60021

SDI

  

Standard

  

reference

  

number

Title

ANSI/NC 1.0 -06

Standard for Noncomposite Steel Floor Deck

ANSI/RD 1.0 -06

Standard for Steel Roof Deck

Steel Joist Institute,

1173B London Links Drive

Forest, VA 24551

SJI

  

Standard

  

reference

  

number

Title

CJ- 1.0 -06

Standard Specification for Composite Steel Joists,

  

CJ-series

JG- 1.1 -05

Standard Specification for Joist Girders

K- 1.1 -05

Standard Specification for Open Web Steel Joists,

  

K- series

LH/DLH- 1.1 -05

Standard Specification for Longspan Steel Joists,

  

LH-series and Deep Longspan Steel Joists, DLH-

  

series

Single-Ply Roofing Institute,

411 Waverly Oaks Road, Suite 331B,

Waltham, MA 02452

SPRI

  

Standard

  

reference

  

number

Title

SPRI/ANSI/ES-1-03

Wind Design Standard for Edge Systems Used with

  

Low Slope Roofing Systems

RP-4-02

Wind Design Guide for Ballasted Single-ply

  

Roofing Systems

Telecommunications Industry Association

2500 Wilson Boulevard

Arlington, VA 22201-3834

TIA

  

Standard

  

reference

  

number

Title

TIA-222-G-09

Structural Standards for Steel Antenna Towers and

  

Antenna Supporting Structures including-Addendum 1,

  

222-G-1, Dated 2007

The Masonry Society,

3970 Broadway, Unit 201-D,

Boulder, CO 80304-1135

TMS

  

Standard

  

reference

  

number

Title

0216-07

Standard Method for Determining Fire Resistance of

  

Concrete and Masonry Construction Assemblies

0302-07

Standard Method for Determining the Sound Transmission

  

Class Rating for Masonry Walls

402-08

Building Code Requirements for Masonry Structures

602-08

Specification for Masonry Structures

Truss Plate Institute,

218 N. Lee Street, Suite 312

Alexandria, VA 22314

TPI

  

Standard

  

reference

  

number

Title

TPI 1-2007

National Design Standards for Metal-plate-connected

  

Wood Truss Construction

Underwriters Laboratories, Inc.

333 Pfingsten Road

Northbrook, IL 60062-2096

UL Standard

  

reference

  

number

Title

9-09

Fire Tests of Window Assemblies

10A-09

Tin Clad Fire Doors

10B-08

Fire Tests of Door Assemblies

10C-09

Positive Pressure Fire Tests of Door Assemblies

14B-08

Sliding Hardware for Standard Horizontally-mounted Tin

  

Clad Fire Doors

14C-06

Swinging Hardware for Standard Tin Clad Fire Doors

  

Mounted Singly and in Pairs

103-10

Factory-built Chimneys, for Residential Type and Building

  

Heating Appliances

127-08

Factory-built Fireplaces

199E-04

Outline of Investigation for Fire Testing of Sprinklers and

  

Water Spray Nozzles for Protection of Deep Fat Fryers.

217-06

Single and Multiple Station Smoke Alarms

263-03

Standard for Fire Test of Building Construction and

  

Materials

268-09

Smoke Detectors for Fire Protective Signaling Systems

300-05

Fire Testing of Fire Extinguishing Systems for Protection

  

of Restaurant Cooking Areas

305-97

Panic Hardware

325-02

Door, Drapery, Gate, Louver and Window Operations and

  

Systems-with Revisions through February 2006

555-2006

Fire Dampers

555C-2006

Ceiling Dampers

555S-99

Smoke Dampers-with Revisions through July 2006

580-2006

Test for Uplift Resistance of Roof Assemblies

641-95

Type L Low-temperature Venting Systems

710B-04

Recirculating Systems-with Revisions through April 2006

723-08

Standard for Test for Surface Burning Characteristics of

  

Building Materials

790-04

Standard Test Methods for Fire Tests of Roof Coverings

793-08

Standards for Automatically Operated Roof Vents for

  

Smoke and Heat

864-03

Standards for Control Units and Accessories for Fire Alarm

  

Systems-with Revisions through March 2006

924-06

Standard for Safety Emergency Lighting and Power

  

Equipment

1040-96

Fire Test of Insulated Wall Construction-with Revisions

  

through June 2001

1256-02

Fire Test of Roof Deck Construction-with Revisions

  

through January 2007

1479-03

Fire Tests of Through-penetration Firestops-with

  

Revisions through April 2007

1482-10

Solid-fuel-type Room Heater

1715-97

Fire Test of Interior Finish Material-with Revisions

  

through March 2004

1777-07

Chimney Liners

1784-01

Air Leakage Tests of Door Assemblies-with Revisions

  

through December 2004

1897-04

Uplift Tests for Roof Covering Systems

1975-06

Fire Test of Foamed Plastics Used for Decorative Purposes

1994-04

Standard for Luminous Egress Path Marking Systems-

  

with Revisions through February 2005

2017-08

Standards for General-purpose Signaling Devices and

  

Systems

2079-04

Tests for Fire Resistance of Building Joint Systems-with

  

Revisions through March 2006

2200-98

Stationary Engine Generator Assemblies

Underwriters Laboratories of Canada,

7 Underwriters Road,

Toronto, Ontario, Canada M1R3B4

ULC

  

Standard

  

reference

  

number

Title

CAN/ULC S 102.2 -2010

Standard Method of Test for Surface Burning

  

Characteristics of Flooring, Floor Coverings and

  

Miscellaneous Materials and Assemblies-with

  

2000 Revisions

United States Code,

c/o Superintendent of Documents

U.S. Government Printing Office,

Washington, DC 20402-9325

USC

  

Standard

  

reference

  

number

Title

10 U.S.C. Sections 18233(A)(1) and 18237-1994

  

18 USC Part 1 , Ch.40

Importation, Manufacture, Distribution and Storage

  

of Explosive Materials

Window and Door Manufacturers Association

1400 East Touhy Avenue #470

Des Plaines, IL 60018

WDMA

  

Standard

  

reference

  

number

Title

AAMA/WDMA/CSA

  

101/I.S.2/A440-08

Specifications for Windows, Doors and Unit

  

Skylights

Wire Reinforcement Institute, Inc.

942 Main Street, Suite 300

Hartford, CT 06103

WRI

  

Standard

  

reference

  

number

Title

WRI/CRSI-81

Design of Slab-on-ground Foundations-with 1996 Update

Effective: 03/01/2013
R.C. 119.032 review dates: 11/01/2016
Promulgated Under: 119.03
Statutory Authority: 3781.10(A)
Rule Amplifies: 3781.10 , 3781.11 , 3791.04
Prior Effective Dates: 9/1/92, 2/1/93, 7/1/95, 7/1/97, 3/1/98, 7/1/98, 1/1/99, 12/1/00, 1/1/02, 3/1/05, 9/6/05, 3/1/06, 7/1/07, 1/1/08, 3/31/08(Emer.), 6/24/08, 1/1/09, 11/1/11, 3/15/12