Chapter 4101:2-15 Referenced standards

4101:2-15-01 Referenced standards.

1501.1 General. This chapter lists the codes and standards that are referenced in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and the title. The application of the referenced standards shall be as specified in Section 102.5 of the building code.

1501.2 Referenced codes:When indicated in the OMC, the following codes refer to provisions in the listed chapters of the Administrative Code:

Referenced code

Ohio Administrative Code chapters

Building Code

4101:1-1 to 4101:1-35

Fire Code

1301:7-1 to 1301:7-7

Ohio Boiler and Pressure Vessel Rules

4101:4-1 to 4101:4-10

Plumbing Code

4101:3-1 to 4101:3-13

1501.3 Referenced Standards.

ACCA Air Conditioning Contractors of America

2800 Shirlington Road, Suite 300

Arlington, VA 22206

Standard reference number


Manual D-95


Residential Duct Systems

Peak Cooling and Heating Load Calculations in Buildings Except Low-Rise Residential Buildings

AHRI Air-Conditioning, Heating and Refrigeration Institute

4100 North Fairfax Drive, Suite 200

Arlington, VA 22203

Standard reference number



Purity Specifications for Fluorocarbon and Other Refrigerants

ANSIAmerican National Standards Institute

11 West 42nd Street

New York, NY 10036

Standard reference number


Z 21.8 -1994 (R2002)

Installation of Domestic Gas Conversion Burners

ASHRAE American Society of Heating, Refrigerating and Air-Conditioning

Engineers, Inc.

1791 Tullie Circle, NE

Atlanta, GA 30329

Standard reference number


Handbook- 2009

ASHRAE Fundamentals Handbook-


Safety Standard for Refrigeration Systems


Designation and Safety Classification of Refrigerants

62.1 -2010

Ventilation for Acceptable Indoor Air Quality


Ventilation for Acceptable Indoor Air Quality in Low-Rise Residential Buildings


Ventilation of Health Care Facilities (with addendums a through h-2011)

ASME American Society of Mechanical Engineers

Three Park Avenue

New York, NY 10016-5990

Standard reference number


B1.20.1-1983 (R2006)

Pipe Threads, General Purpose (Inch

B 16.3 -2006

Malleable Iron Threaded Fittings, Classes 150 & 300

B 16.5 -2009

Pipe Flanges and Flanged Fittings NPS 1/2 through NPS 24-.

B 16.9 -2007

Factory Made Wrought Steel Buttwelding Fittings

B 16.11 -2009

Forged Fittings, Socket-welding and Threaded

B 16.15 -2006

Cast Bronze Threaded Fittings

B 16.18 -2001 (Reaffirmed 2005)

Cast Copper Alloy Solder Joint Pressure Fittings

B 16.22 -2001 (Reaffirmed 2005)

Wrought Copper and Copper Alloy Solder Joint Pressure Fittings

B 16.23 -2002 (Reaffirmed 2006)

Cast Copper Alloy Solder Joint Drainage Fittings DWV

B 16.24 -2006

Cast Copper Alloy Pipe Flanges and Flanged Fittings: Class 150, 300, 400, 600, 900, 1500 and

B 16.26 -2006

Cast Copper Alloy Fittings for Flared Copper Tubes

B 16.28 -1994

Wrought Steel Buttwelding Short Radius Elbows and Returns

B 16.29 -2007

Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings-

B 31.9 -2010

Building Services Piping


Boiler & Pressure Vessel Code

BPVC Section IX-2010

Welding and Brazing Qualifications


Controls and Safety Devices for Automatically Fired Boilers

ASSEAmerican Society of Sanitary Engineering

901 Canterbury, Suite A

Westlake, OH 44145

Standard reference number



Temperature Actuated Mixing Valves for Hot Water Distribution Systems

ASTMASTM International

100 Barr Harbor Drive

West Conshohocken, PA 19428

Standard reference number


A 53/A 53M-10

Specification for Pipe, Steel, Black and Hot-dipped, Zinc-coated Welded and Seamless

A 106/A106M-10

Specification for Seamless Carbon Steel Pipe for High-Temperature Service

A 126-04 (2009)

Specification for Gray Iron Castings for Valves, Flanges and Pipe Fittings

A 254-97 (2007)

Specification for Copper Brazed Steel Tubing

A 420/A 420M-10

Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

A 539-99

Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines

B 32-08

Specification for Solder Metal

B 42-10

Specification for Seamless Copper Pipe, Standard Sizes

B 43-09

Specification for Seamless Red Brass Pipe, Standard

B 68-02

Specification for Seamless Copper Tube, Bright Annealed

B 75-02

Specification for Seamless Copper

B 88-09

Specification for Seamless Copper Water

B 135-10

Specification for Seamless Brass Tube

B 251-10

Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube

B 280-08

Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

B 302-07

Specification for Threadless Copper Pipe, Standard

B 813-10

Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

C 315-07

Specification for Clay Flue Liners and Chimney Pots

C 411-05

Test Method for Hot-surface Performance of High-temperature Thermal Insulation

D 56-05 (2010)

Test Method for Flash Point by Tag Closed Tester

D 93-10a

Test Method for Flash Point of Pensky-Martens Closed Cup Tester

D 1527-99(2005)

Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80

D 1693-08

Test Method for Environmental Stress-Cracking of Ethylene Plastics

D 1785-06

Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe, Schedules 40, 80 and 120

D 2235-04

Specifications for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

D 2241-09

Specification for Poly (Vinyl Chloride)(PVC) Pressure-rated Pipe (SDR-Series

D 2282-99(2005)

Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)

D 2412-10

Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-plate Loading

D 2447-03

Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter

D 2466-06

Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings, Schedule 40

D 2467-06

Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings, Schedule 80

D 2468-96a

Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40

D 2513-09a

Specification for Thermoplastic Gas Pressure Pipe, Tubing, and

D 2564-04(2009)e01

Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems

D 2657-07

Standard Practice for Heat Fusion Joining ofPolyolefin Pipe and Fittings

D 2683-10

Specification for Socket-type Polyethylene Fittings for Outside Diameter-controlled Polyethylene Pipe and Tubing

D 2837-08

Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products

D 2846/D 2846M-09b

Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems

D 2996-01(2007)e01

Specification for Filament-wound Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Pipe

D 3035-08

Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

D 3278-96(2004)e01

Test Methods for Flash Point of Liquids by Small Scale Closed-cup Apparatus

D 3261-10a

Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and

D 3309-96a(2002)

Specification for Polybutylene (PB) Plastic Hot and Cold Water Distribution Systems

D 3350-10

Specification for Polyethylene Plastics Pipe and Fittings Materials

E 84-10b

Test Method for Surface Burning Characteristics of Building Materials

E 119-10b

Test Method for Fire Tests of Building Construction and

E 136-09b

Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 Degrees C

E 814-10

Test Method for Fire Tests of Through-penetration Fire

E 1509-04

Specification for Room Heaters, Pellet Fuel-burning

E 2231-09

Standard Practice For Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics

E 2336-04 (2009)

Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems

F 438-09

Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

F 439-09

Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

F 441/F 441M-09

Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and

F 442/F 442M-09

Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR).

F 493-10

Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

F 876- 10

Specification forCrosslinkedPolyethylene (PEX) Tubing

F 877-07

Specification for Crosslinked Polyethylene (PEX) Plastic Hot and Cold Water Distribution Systems.

F 1055-98(2006)

Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and

F 1281-07

Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe

F 1282-10

Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

F 1476-07

Specification for Performance of Gasketed Mechanical Couplings for


Use in Piping Applications

F 1924-05

Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

F 1974-09

Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe

F 2389-10

Specification for Pressure-Rated Polypropylene Piping Systems

F 2623-08

Standard Specification for Polyethylene of Raised Temperature (PERT) SDR 9 Tubing1

AWSAmerican Welding Society

550 N.W. LeJeune Road P.O. Box 351040

Miami, FL 33135

Standard reference number


A 5.8 -2004

Specifications for Filler Metals for Brazing and Braze Welding.

AWWAAmerican Water Work Association

6666 West Quincy Avenue

Denver, CO 80235

Standard reference number


C110/A 21.10 -08

Standard for Ductile Iron & Gray Iron Fittings, 2 inches Through 48 inches for Water

C115/A 21.15 -05

Standard for Flanged Ductile-iron Pipe with Ductile Iron or Grey-iron Threaded Flanges

C151/A 21.51 -09

Standard for Ductile-Iron Pipe, Centrifugally Cast for Water

C153/A 21.53 -06

Standard for Ductile-Iron Compact Fittings for Water Service

CSACanadian Standards Association

5060 Spectrum Way Mississauga,

Ontario, Canada L4W 5N6

Standard reference number


B 137.9 -M91 CAN/CSA

Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure-Pipe Systems

B 137.10 - 05

Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene Composite Pressure-Pipe Systems

ANSI CSA America FC1- 04

Stationary Fuel Cell Power Systems

DOLDepartment of Labor Occupational Safety and Health Administration

c/o Superintendent of Documents

US Government Printing Office

Washington, DC 20402-9325

Standard reference number


29 CFR Part 1910.1000(1974)

Air Contaminants

29 CFR Part 1910. 1025

Toxic and Hazardous Substances

FSFederal Specifications*

General Services Administration

7th & D Streets Specification Section, Room 6039

Washington, DC 20407

Standard reference number


WW-P-325B (1976)

Pipe, Bends, Traps, Caps and Plugs; Lead (for Industrial Pressure and Soil and Waste Applications

*Standards are available from the Supt. of Documents, U.S. Government Printing Office, Washington, DC 20402-9325.

ICCInternational Code Council, Inc.

500 New Jersey Ave, NW

6th Floor ICC

Washington, DC 20001

Standard reference number



International Fuel Gas Code (including ICC Emergency Amendment changing IFGC Sections 406.7 )

IIAR International Institute of Ammonia Refrigeration

1110 North Glebe Road

Arlington, VA 22201

Standard reference number


2-99 (with Addendum A-2005)

Equipment, Design, and Installation of Ammonia Mechanical Refrigerating Systems

MSSManufacturers Standardization Society of the Valve & Fittings Industry, Inc. 1

27 Park Street, N.E.

Vienna, VA 22180

Standard reference number



Pipe Hangers and Supports-Selection and Application

NAIMANorth American Insulation Manufacturers Association

44 Canal Center Plaza, Suite 310 Alexandria, VA 22314

Standard reference number



Fibrous Glass Duct Construction Standards

NFPANational Fire Protection Association

1 Batterymarch Park

Quincy, MA 02169-7471

Standard reference number



Flammable and Combustible Liquids Code


Code for Motor Fuel-dispensing Facilities and Repair Garages

31- 11

Installation of Oil-burning Equipment

37- 10

Stationary Combustion Engines and Gas Turbines

58- 11

Liquefied Petroleum Gas Code


Explosion Prevention Systems

70- 14

National Electrical Code

72- 10

National Fire Alarm and Signaling Code (including TIA 10-4 and TIA 10-5)


Protection of Information Technology Equipment

82- 09

Incinerators and Waste and Linen Handling Systems and Equipment


Boiler and Combustion Systems Hazards Code

91- 10

Exhaust Systems for Air Conveying of Vapors, Gases, and Noncombustible Particulate Solids

92B- 09

Smoke Management Systems in Malls, Atria and Large Spaces


Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations

211- 10

Chimneys, Fireplaces, Vents and Solid Fuel-burning Appliances


Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-handling Spaces


Identification of the Hazards of Materials for Emergency Response

853- 10

Installation of Stationary Fuel Power Plants

SMACNASheet Metal & Air Conditioning Contractors National Assoc., Inc.

4201 Lafayette Center Drive

Chantilly, VA 20151-1209

Standard reference number




HVAC Duct Construction Standards-Metal and Flexible (2005)

Fibrous Glass Duct Construction Standards

ULUnderwriters Laboratories, Inc.

333 Pfingsten Road

Northbrook, IL 60062-2096

Standard reference number


17- 08

Vent or Chimney Connector Dampers for Oil-fired Appliances

103- 10

Factory-built Chimneys, Residential Type and Building Heating Appliance

127- 08

Factory-built Fireplaces


Household Electric Storage Tank Water Heaters-with Revisions through May 2006


Factory-made Air Ducts and Air Connectors-with Revisions through December 1998


Closure Systems for Use with Rigid Air Ducts and Air Connectors- with Revisions through December 1998


Closure Systems for Use with Flexible Air Ducts and Air Connectors- with Revisions through December 1998


Refrigerant-containing Components and Accessories, Nonelectrical- with Revisions through November 2004


Standard for Fire Test of Building Construction and Materials

268- 09

Smoke Detectors for Fire Prevention Signaling Systems

268A- 08

Smoke Detectors for Duct Applications

343- 08

Pumps for Oil-Burning Appliances

391- 10

Solid-fuel and Combination-fuel Central and Supplementary Furnaces


Refrigeration Unit Coolers-with Revisions through February 2007 .

471- 10

Commercial Refrigerators and Freezers


Industrial Control Equipment-with Revisions through July 2005


Flexible Metallic Hose-with Revisions through June 2003


Fire Dampers-with Revisions through January 2002.


Ceiling Dampers


Smoke Dampers-with Revisions through July 2006

586- 09

High-efficiency, Particulate, Air Filter Units


Type L Low-temperature Venting Systems-with Revisions through August 2005


Exhaust Hoods for Commercial Cooking Equipment-with Revisions through February 2007.


Recirculating Systems

723- 08

Standard for Test for Surface Burning Characteristics of Building Materials


Oil-fired Boiler Assemblies-with Revisions through March 2006


Oil-fired Central Furnaces


Oil-fired Floor Furnaces-with Revisions through January 1999


Oil-fired Wall Furnaces-with Revisions through January 1999


Oil-fired Unit Heaters-with Revisions through February 2006


Oil-fired Storage Tank Water Heaters-with Revisions through February 2005

737- 07

Fireplace Stoves


Outline of Investigation for Power Ventilators for Restaurant Exhaust




Residential Incinerators.


Heating, Water Supply and Power Boilers Electric-with Revisions through March 2006


Household Electric Ranges-with Revisions through April 2006


Electrostatic Air Cleaners-with Revisions through May 2004

875- 09

Electric Dry Bath Heater


Oil-burning Stoves-with Revisions through May 2004


Air Filter Units

923- 08

Microwave Cooking Appliances


Medium Heat Appliance Factory-built Chimneys-with Revisions through September 2006


Electric Commercial Clothes


Electric Water Heaters for Pools and Tubs-with Revisions through June 2004


Electric Booster and Commercial Storage Tank Water Heaters-with Revisions through May 2006

1482- 10

Solid-fuel Type Room Heaters

1777- 07

Chimney Liners .

1812- 09

Standard for Ducted Heat Recovery Ventilators

1815- 09

Standard for Nonducted Heat Recovery Ventilators


Fire Test of Pneumatic Tubing for Flame and Smoke Characteristics


Fire Tests of Plastic Sprinkler Pipe for Visible Flame and Smoke Characteristics

1978- 05

Grease Ducts


Heating and Cooling Equipment .


Protected Above-Ground Tanks for Flammable and Combustible Liquids


Electric Clothes Dryers-with Revisions through May 2004


Outline of Investigation for Commercial Wood-fired Baking Ovens- Refractory Type

2200- 12

StationaryEngine Generator Assemblies

2221- 10

Tests of Fire Resistive Grease Duct Enclosure Assemblies

Effective: 1/1/2016
Five Year Review (FYR) Dates: 11/01/2016
Promulgated Under: 119.03
Statutory Authority: 3781.10(A)
Rule Amplifies: 3781.10 , 3781.11, 3791.04
Prior Effective Dates: 7/1/82, 3/1/85, 3/1/86, 1/1/89, 9/1/92, 7/1/95, 2/1/96, 3/1/98, 7/1/98, 1/1/02, 1/1/04, 3/1/05, 9/6/05, 3/1/06, 7/1/07, 1/1/08, 3/31/08(Emer.), 6/24/08, 1/1/09, 11/1/11, 3/1/13, 1/1/15

4101:2-15-01.1 General. [Rescinded].

Rescinded eff 7-1-07

4101:2-15-01.2 Referenced codes. [Rescinded].

Rescinded eff 7-1-07

4101:2-15-01.3 Referenced standards. [Rescinded].

Rescinded eff 7-1-07