Chapter 4101:4-3 Practice and Standards

4101:4-3-01 [Effective until 1/1/2015] Accepted engineering practice and approved standards.

(A) Where references are made in Chapters 4101:4-1 to 4101:4-10 of the Administrative Code to the applicable section of the "ASME Boiler and Pressure Vessel Code" or to other standards or publications, this rule identifies the specific edition of the code, standard, or publication that is adopted. Conformity to the applicable technical provisions, requirements, recommendations, and determinations in the codes, standards or other referenced publications adopted in "Table 4-3-01" of this rule, is prima-facie evidence of conformity with accepted engineering practice or with an approved standard.

(B) The board of building standards adopts existing published standards by year of issue as shown in "Table 4-3-01" of the Administrative Code as well as amendments, supplements, and addenda subsequently published prior to issuance of the next edition by the same authority in accordance with section 4104.02 of the Revised Code.

Table 4-3-01

Authority

Edition Date

Designation

Title

ASME

2010

BPVC -Section I (see footnote a)

Power Boilers.

ASME

2010

BPVC -Section II

Material Specifications. Part A-Ferrous. Part B-Non-Ferrous. Part C-Welding Rods, Electrodes and Filler Metals. Part D-Properties.

ASME

2010

BPVC -Section III

Nuclear Facility Components.

ASME

2010

BPVC -Section IV

Heating Boilers.

ASME

2010

BPVC -Section V

Nondestructive Examination.

ASME

2010

BPVC -Section VI

Recommended Rules for Care and Operation of Heating Boilers.

ASME

2010

BPVC -Section VII

Recommended Guidelines for Care of Power Boilers.

ASME

2010

BPVC -Section VIII

Pressure Vessels-Division 1.

ASME

2010

BPVC -Section VIII

Pressure Vessels-Division 2.

ASME

2010

BPVC -Section VIII

Pressure Vessels-Division 3.

ASME

2010

BPVC -Section IX

Welding and Brazing Qualifications.

ASME

2010

BPVC -Section X

Fiber-Reinforced Plastic Pressure Vessels.

ASME

2010

BPVC -Section XI

Rules for Inservice Inspection of Nuclear Power Plant Components.

ASME

2010

BPVC

Code Cases.

ASME

2010

B 31.1

Power Piping.

           

National Board

2011

NBIC

National Board Inspection Code.

National Board

Jul. 2012, Rev.0

NB-27

A Guide for Blowoff Vessels.

National Board

May 2012, Rev. 5

NB-263

        

Rules for National Board Inservice and New Construction Commissioned Inspectors.

National Board

Feb. 2011, Rev. 4

NB-371

Accreditation of Owner-User Inspection Organizations (OUIO).

Footnote a: For riveted construction, see "ASME, BPVC-Section I, Power Boilers, Part PR (1971 edition)."

Effective: 03/01/2013
R.C. 119.032 review dates: 11/08/2012 and 02/08/2018
Promulgated Under: 119.03
Statutory Authority: 4104.02(A)
Rule Amplifies: 4104.02(E)
Prior Effective Dates: 7/1/78, 11/1/80, 7/1/84, 2/1/87, 1/1/90, 1/1/93, 2/1/96, 4/1/99, 4/1/01, 1/1/02, 3/1/05, 7/1/07, 11/1/07

4101:4-3-01 [Effective 1/1/2015] Accepted engineering practice and approved standards.

(A) Where references are made in Chapters 4101:4-1 to 4101:4-10 of the Administrative Code to the applicable section of the "ASME Boiler and Pressure Vessel Code" or to other standards or publications, this rule identifies the specific edition of the code, standard, or publication that is adopted. Conformity to the applicable technical provisions, requirements, recommendations, and determinations in the codes, standards or other referenced publications adopted in "Table 4-3-01" of this rule, is prima-facie evidence of conformity with accepted engineering practice or with an approved standard.

(B) The board of building standards adopts existing published standards by year of issue as shown in "Table 4-3-01" of the Administrative Code as well as amendments, supplements, and addenda subsequently published prior to issuance of the next edition by the same authority in accordance with section 4104.02 of the Revised Code.

Table 4-3-01

Authority

Edition Date

Designation

Title

ASME

2010

BPVC -Section I (see footnote a)

Power Boilers.

ASME

2010

BPVC -Section II

Material Specifications. Part A-Ferrous. Part B-Non-Ferrous. Part C-Welding Rods, Electrodes and Filler Metals. Part D-Properties.

ASME

2010

BPVC -Section III

Nuclear Facility Components.

ASME

2010

BPVC -Section IV

Heating Boilers.

ASME

2010

BPVC -Section V

Nondestructive Examination.

ASME

2010

BPVC -Section VI

Recommended Rules for Care and Operation of Heating Boilers.

ASME

2010

BPVC -Section VII

Recommended Guidelines for Care of Power Boilers.

ASME

2010

BPVC -Section VIII

Pressure Vessels-Division 1.

ASME

2010

BPVC -Section VIII

Pressure Vessels-Division 2.

ASME

2010

BPVC -Section VIII

Pressure Vessels-Division 3.

ASME

2010

BPVC -Section IX

Welding and Brazing Qualifications.

ASME

2010

BPVC -Section X

Fiber-Reinforced Plastic Pressure Vessels.

ASME

2010

BPVC -Section XI

Rules for Inservice Inspection of Nuclear Power Plant Components.

ASME

2010

BPVC

Code Cases.

ASME

2010

B 31.1

Power Piping.

ASME

2012

CSD-1

"Controls and Safety Devices for Automatically Fired Boilers."

NFPA

2011

NFPA 85

"Boiler and Combustion Systems Hazards Code"

National Board

2011

NBIC

National Board Inspection Code.

National Board

Jul. 2012, Rev.0

NB-27

A Guide for Blowoff Vessels.

National Board

May 2012, Rev. 5

NB-263

Rules for National Board Inservice and New Construction Commissioned Inspectors.

National Board

Feb. 2011, Rev. 4

NB-371

Accreditation of Owner-User Inspection Organizations (OUIO).

Footnote a: For riveted construction, see "ASME, BPVC-Section I, Power Boilers, Part PR (1971 edition)."

Effective: 1/1/2015
Five Year Review (FYR) Dates: 02/08/2018
Promulgated Under: 119.03
Statutory Authority: 4104.02(A)
Rule Amplifies: 4104.02(B)
Prior Effective Dates: 7/1/78, 11/1/80, 7/1/84, 2/1/87, 1/1/90, 1/1/93, 2/1/96, 4/1/99, 4/1/01, 1/1/02, 3/1/05, 7/1/07, 11/1/07, 3/1/13

4101:4-3-02 Assessment fee. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-05 Application of state serial numbers. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-08 Hydrostatic tests. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-09 Lap seam crack. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-10 Steam boiler blowoff systems. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-11 Location of discharge. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-12 Examination. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-17 Requirement for cover removal. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-18 Notification of accident. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-27 Non-standard boilers. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-28 Secondhand boilers. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-29 Reinstalled boilers. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-30 Boilers energized electrically. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-31 Minor repairs. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-32 Major repairs. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-33 Safety devices. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-34 Unlawful loading of safety valves. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-36 Disagreement with an inspector's decisions. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-37 Overhead and side clearance. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-38 Conditions not covered by these rules. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-39 Registration of contractor. [Rescinded].

Rescinded eff 7-1-07

4101:4-3-40 Licensure and attendance requirements of operators. [Rescinded].

Rescinded eff 7-1-07