4123:1-7-03 Galleries.

(A) Galleries where molten metal is poured into molds shall be:

(1) Provided with solid, leakproof floors, or

(2) Guarded to prevent access to the area below the pouring operation.

(B) Partitions of sheet steel no less than forty-two inches in height shall be installed on any open side of galleries described in paragraph (A) of this rule.

Eff (Amended) 4-1-64; 1-1-81
Rule promulgated under: RC Chapter 119.
Rule authorized by: RC 4121.131 , Const. Art. II, Sec. 35
R.C. 119.032 review dates: 07/28/2009 and 07/01/2014