(A) The size of the backing material for movable SMV emblems shall be as shown in figure 2 of ANSI/ASAE S 276.6 JAN2005.
(B) Backing material for movable emblems shall be equivalent to 1.0 mm ( 0.04 in.)
minimum thickness aluminum; 22-gauge 0.8 mm ( 0.03 in.) minimum thickness millgalvanized coated sheet steel; or 2.0 mm ( 0.08 in.) minimum thickness ABS plastic as specified in ASTM International standard (ASTM) D4673 or 2.00 mm ( 0.08 in.) high impact polystyrene plastic as specified in ASTM D4549.
(C) The backing material shall be weatherable, semi-rigid and have a surface receptive to a durable bond. The edges of the backing material shall be shaped to minimize personal injury during handling and when mounted on a slow-moving vehicle. .
(D) The backing material for movable SMV emblems shall be as large or larger than the slow-moving vehicle identification emblem.
(E) All of these requirements are minimal and do not preclude the use of materials having superior performance.
R.C. 119.032 review dates: 03/09/2010 and 03/09/2015
Promulgated Under: 119.03
Statutory Authority: R.C. 4513.11
Rule Amplifies: R.C. 4513.11
Prior Effective Dates: 4/1/66, 12/1/77, 8/11/05