(A) The engineer or surveyor shall not sign and/or seal professional work for which he or she does not have personal professional knowledge and direct supervisory control and responsibility. This is interpreted by the board to mean that an engineer or surveyor shall not sign and/or seal professional work unless that work was prepared under his/her supervision and direction. The engineer or surveyor shall be involved in the project and must be closely involved in the preparation of the work product.
(B) The engineer or surveyor shall not knowingly associate with, or permit the use of his or her name or firm name in, a business venture by any person or firm which he or she knows, or has reason to believe, is engaging in business or professional practices of a fraudulent or dishonest nature.
(C) If the engineer or surveyor has knowledge or reason to believe that another person or firm is guilty of violating any of the provisions of Chapter 4733. of the Revised Code, or any of these rules of professional conduct, he or she shall present this information to the board in writing.
(D) If a professional engineer or professional surveyor is found guilty of a felony or had his or her registration revoked or suspended by another jurisdiction, the professional engineer or professional surveyor shall notify the board in writing within sixty days.
Prior History: (Effective:
R.C. 119.032 review dates: 08/18/2008 and 11/24/2013
Promulgated Under: 119.03
Statutory Authority: 4733.07
Rule Amplifies: 4733.20
Prior Effective Dates: 10-15-70; 11-01-03 )