5501:2-1-17 Regional heavy haul permits.

(A) The definition of regional heavy haul permit set forth in paragraph (EE) of rule 5501:2-1-01 of the Administrative Code shall apply to permits issued under this rule. The permit application procedures set forth in paragraphs (A), (D), (E), (F), (G), and (H) of rule 5501:2-1-03 of the Administrative Code shall apply to regional heavy haul permit applications.

(B) The applicant for a regional heavy haul permit shall provide an accurate and complete description of the vehicle and load to be moved and proposed routing thereof. The information shall include all physical dimensions, axle weights and the gross vehicle weight. Inaccurate or otherwise incomplete applications may result in a rejection of the application or a delay of the issuance of a permit. Failure to propose a specific route on the application or failure of the proposed routing to accommodate the load shall result in the assignment of the best available route as determined by the director or their designee.

(C) Regional heavy haul permits that have a gross vehicle weight of one hundred twenty thousand pounds or less, or an overall width of fourteen feet or less, or an overall height of fourteen feet, six inches or less may obtain either a single trip or ninety day continuing permit. The fees for a single trip permit or ninety day continuing permit are as follows:

(1) Single trip steel or aluminum coil permit (legal dimensions):

(a) Basic processing charge:ten dollars; and

(b) Units of surcharge to be added where applicable:

Overweight exceeding eighty thousand pounds, but less than or equal to one hundred twenty thousand pounds gross vehicle weight: sixty-five dollars, plus sixty-five dollars for each additional destination (up to a maximum of four additional destinations).

(2) Single trip oversize only permit:

(a) Basic processing charge: ten dollars; and

(b) Units of surcharge to be added where applicable:

Width exceeding eight feet six inches, but less than or equal to fourteen feet, or height exceeding thirteen feet, six inches, but less than or equal to fourteen feet, six inches: one hundred twenty-five dollars, plus sixty-five dollars for each additional destination (up to a maximum of four additional destinations).

(3) Single trip oversize/overweight permit:

(a) Basic processing charge: ten dollars; and

(b) Units of surcharge to be added where applicable:

Overweight exceeding eighty thousand pounds, but less than or equal to one hundred twenty thousand pounds gross vehicle weight with a width exceeding eight feet six inches, but less than or equal to fourteen feet, or height exceeding thirteen feet, six inches, but less than or equal to fourteen feet, six inches: one hundred thirty-five dollars, plus one hundred thirty-five dollars for each additional destination (up to a maximum of four additional destinations).

(4) Ninety day steel or aluminum coil permit (legal dimensions):

(a) Basic processing charge: ten dollars; and

(b) Units of surcharge to be added where applicable:

Overweight exceeding eighty thousand pounds but less than or equal to one hundred twenty thousand pounds gross vehicle weight: one hundred twenty-five dollars, plus sixty-five dollars for each additional desintation (up to a maximum of four additional destinations).

(5) Ninety day oversize only permit:

(a) Basic processing charge: ten dollars; and

(b) Units of surcharge to be added where applicable:

Width exceeding eight feet six inches, but less than or equal to fourteen feet, or height exceeding thirteen feet, six inches, but less than or equal to fourteen feet, six inches: two hundred fifty dollars, plus sixty-five dollars for each additional destination (up to a maximum of four additional destinations).

(6) Ninety day oversize/overweight permit:

(a) Basic processing charge: ten dollars; and

(b) Units of surcharge to be added where applicable:

Overweight exceeding eighty thousand pounds, but less than or equal to one hundred twenty thounsand pounds gross vehicle weight with a width exceeding eight feet six inches, but less than or equal to fourteen feet, or height exceeding thirteen feet, six inches, but less than or equal to fourteen feet, six inches: Five hundred dollars, plus one hundred thirty-five dollars for each additional destination (up to a maximum of four additional destinations).

(D) Regional heavy haul permits that exceed one hundred twenty thousand lbs. gross vehicle weight, or an overall width greater than fourteen feet, or an overall height greater than fourteen feet, six inches will be issued for single trip one-way movements and the application processing fee is based on one-way movements. The application processing fee consists of the basic processing charge plus each unit of surcharge that is applicable to that movement. The application fee for one-way movements is as follows:

(1) Basic processing charge: ten dollars; and

(2) Units of surcharge to be added where applicable:

(a) Overweight exceeding one hundred twenty thousand lbs. gross vehicle weight: one hundred twenty-five dollars plus four cents per ton, over sixty tons, per mile traveled (up to a maximum of four additional destinations):

(b) Overall width in excess of fourteen feet and/or overall height in excess of fourteen feet, six inches: one hundred twenty-five dollars plus sixty-five dollars for each additional destination (up to a maximum of four additional destinations).

Effective: 01/27/2014
R.C. 119.032 review dates: 09/01/2018
Promulgated Under: 119.03
Statutory Authority: 4513.34
Rule Amplifies: 4513.34