Chapter 901:12-10 Poultry Broilers and Breeders
The administrative rules in Chapter 901:12-10 of the Administrative Code apply exclusively to poultry broilers and breeders as defined in section 904.01 of the Revised Code and rule 901:12-3-01 of the Administrative Code.
"Conditioning" is the trimming of the beak or the partial/complete removal of the comb, toe nail and dewclaw for the purpose of prevention of injury during the growth or maturity of poultry.
(A) Water may be withheld based on specific direction, written or verbal, of a licensed veterinarian and only for the period of time specified by the veterinarian; or,
(B) Water may be restricted or withheld temporarily by the responsible party in circumstances such as:
(1) Preparation for administration of vaccines or medication in the water;
(2) Preparation for transportation; or,
(3) Specific management practices, according to the farm's operating procedures.
(A) The responsible party must catch, lift and move poultry humanely.
(C) The following livestock management procedures are acceptable to minimize injury to the birds and, if performed, must be performed in a humane manner:
(1) Beak conditioning;
(2) Male back toe conditioning;
(4) Caponizing; and,
(5) Induced molting, which must also meet all of the following conditions:
(a) Must use only non-feed withdrawal methods;
(b) Broiler breeders must be fed a maintenance ration for non-producing breeders;
(c) The light period must be reduced to no fewer than six hours in closed houses, or to natural day length in open houses, for the duration of the rest period. When the flock is placed back on a production diet, lights should be returned to the normal program; and,
(d) During molt, flock health, mortality and bird weight must be monitored.
(D) Environmental management must be designed to control rodents, non-beneficial insects, and parasite infestation in the birds, as it applies to the flock's housing system.
(E) Housing for broilers and broiler breeders must meet all of the following conditions:
(1) Must provide a clean and safe environment that promotes the health, welfare and performance of broilers/broiler breeders at all stages of their lives;
(2) Bedding, if provided, must be of a good quality and absorbent;
(3) Environmental moisture must be managed, whether birds are housed indoors or outdoors, to promote flock health and welfare;
(4) Stocking densities must allow all broilers to rest at the same time without being forced to rest on top of each other at all stages of production and, in addition, all broilers must be able to access feed and water without excessive competition that prevents individuals in the flock from maintaining normal body condition;
(5) Housing must be designed in a manner which:
(a) Seeks to minimize the effects of adverse weather conditions;
(b) Seeks to minimize conditions in which the bird cannot effectively thermo-regulate;
(c) Provides sufficient ventilation to reduce concentrations of carbon monoxide, ammonia and dust; and,
(d) Provides backup systems in working condition, in houses/barns that require mechanized ventilation;
(6) Light intensity must be adequate for observation during inspection;
(7) If natural light is not available, artificial light must be provided for rearing and production; and,
(8) Free-range/pastured broilers must be provided reasonable protection from adverse weather conditions and predators.
(F) Broiler breeders housing must meet the following conditions:
(1) If slats are used, the slats must be designed and maintained so as to minimize bruising and injury;
(2) Where slats are used, if birds get under the slats they must be removed immediately;
(3) Introduction of new broiler breeder males must be done in a manner which seeks to minimize aggression and the risk of injury; and,
(4) If nest space is provided, they must be cleaned as necessary to ensure that manure does not accumulate.
The density in poultry conveyances must allow the birds to rest at the same time without being forced to rest on top of each other.