Skip to main content
Back To Top Top Back To Top
The Legislative Service Commission staff updates the Revised Code on an ongoing basis, as it completes its act review of enacted legislation. Updates may be slower during some times of the year, depending on the volume of enacted legislation.

Section 1333.32 | Definitions - moldbuilder' lien.

 

For purposes of sections 1333.32 to 1333.34 of the Revised Code, all of the following apply:

(A) "Customer" means a person that causes a moldbuilder to fabricate, cut, cast, or design molds.

(B) "Mold" means molds, dies, forms, tools, and parts, for the plastic industry or for the metal forming industry.

(C) "Moldbuilder" means a person, including but not limited to, a model maker, patternmaker, die maker, jig and fixture builder, die sinker, mold designer, mold programmer, and mold engineer, that fabricates, cuts, casts, or designs molds for the plastic industry or for the metal forming industry. "Moldbuilder" does not include a person described in division (A)(2) of section 1333.29 of the Revised Code, unless the person also engages in the activities described in this division.

(D) "Molder" has the same definition as in division (A) of section 1333.29 of the Revised Code, but does not include a moldbuilder.

(E) "Person" means an individual, firm, partnership, association, corporation, limited liability company, or other legal entity.

Available Versions of this Section