Ohio Administrative Code Search

...(A) (1) A trust agreement for a trust fund as specified in paragraph (F) of rule 3745-503-05 of the Administrative Code, must be worded as follows on forms prescribed by the director, except that instructions in brackets are to be replaced with the relevant information and the brackets deleted: "Trust agreement" Trust agreement. The "agreement," entered into as of [date] by and between [name of the owner or oper...

...eferenced in either of the following: (1) A rule in a program chapter. (2) A rule in another multi-program chapter that was made applicable by a rule in a program chapter. Program chapters are Chapters 3745-520 to 3745-599 of the Administrative Code. (B) General compliance. (1) The applicant, owner, or operator shall test, construct and certify engineered components as required by this chapter. ...

...roval in accordance with rule 3745-512-17 of the Administrative Code.] (B) Failed test. For the purposes of this rule, a failed test occurs when a test performed on an engineered component of the facility yields a result that does not meet the specifications established in the applicable authorizing document and in the rules. If, prior to submission of the construction certification report for th...

...but not limited to the following: (1) An explosive gas extraction and control system. (2) An explosive gas monitoring system. (3) A ground water monitoring system. (4) A leachate management system. (5) A surface water management system. (6) Any other engineered structure that is necessary to ensure protection of human health, safety, and the environment. (B) [Reserved.] (C) "Ch...

... operator shall ensure the following: (1) An individual meeting the definition of operator is thoroughly familiar with the proper operational procedures, license, permits, and other authorizations pertaining to the facility. (2) The working face is supervised by a person or persons knowledgeable regarding operations at the working face. (B) The owner or operator shall conduct operations at the ...

...zations related to the following: (1) Leachate treatment and disposal. (2) Discharges to surface water. (3) Management of surface water runoff. (4) Air emissions. (B) The owner or operator shall not begin filling in a new phase until the following have occurred: (1) The approved limits of waste placement in the previous phase have been reached, except to the extent necessary for ...

...se of any of the following materials: (1) Asbestos or asbestos-containing waste material that is subject to the provisions of 40 C.F.R. Part 61, subpart M (1984), without the necessary permits. (2) Containerized bulk liquids or non-containerized liquids. For the purposes of this rule, bulk liquid containers do not include small containers that are of a size normally found in household waste. (3...

... vectors, and rodents as follows: (1) Except for solid waste approved as alternative daily cover in accordance with paragraph (A)(3)(c) of this rule, ensure solid waste is not exposed for more than twenty-four hours after unloading. (2) Apply only cover material that is nonputrescible, does not contain large objects in such quantities as may interfere with its application and intended purpos...

...perator shall identify the following: (1) The calendar year that the submittal represents. (2) The areal extent of each phase of construction. (3) The areal extent of closed areas of all units that have a final cap system or have transitional cover. (4) Areas that have intermediate cover. (5) The current working phase and unit. (6) The projected phase and unit for filling in the coming y...

...tains at a minimum the following: (1) Plan sheets in accordance with paragraph (D) of this rule and a narrative report in accordance with paragraph (E) of this rule. Detail engineering plans, specifications, and information as specified in this rule shall be sufficiently detailed to allow for technical review of the permit application and to provide assurance that the facility is designed and...

... contains at a minimum the following: (1) Plan sheets in accordance with paragraph (D) of this rule and a narrative report in accordance with paragraph (E) of this rule. Detail engineering plans, specifications, and information as specified in this rule shall be sufficiently detailed to allow for technical review of the permit application and to provide assurance that the facility is designed and...

...e procedures set forth in rule 3745-500-120 of the Administrative Code, Chapter 3745-49 of the Administrative Code, and section 3734.09 of the Revised Code. The director shall not approve any permit to install application for a facility unless the director determines the following: (1) The owner or operator is capable of operating the facility in compliance with Chapters 3704., 3734., 3745., and ...

...ired by Chapters 3704., 3734., and 6111. of the Revised Code and the rules adopted thereunder. The owner or operator shall make copies of the approved detail plans, specifications, and information as specified in paragraph (D) of rule 3745-550-300 of the Administrative Code available for inspection by the board of health or the director upon request. (B) The owner or operator of a facility sh...

...le if any of the following occur: (1) The facility ceases solid waste acceptance. (2) A facility license held by the owner or operator of the facility expires and no license renewal has been applied for in the manner prescribed in Chapter 3745-501 of the Administrative Code. (3) A facility license held by the owner or operator of the facility expires and a license renewal has been appli...

... of the state as defined in rule 3745-1-02 of the Administrative Code in existence on the date Ohio EPA receives the permit to install application.

... information required in rule 3745-555-310 of the Administrative Code such that the director can determine if the criteria set forth in rule 3745-555-320 of the Administrative Code are satisfied. (B) An application for a permit to install shall be accompanied by the application fee prescribed in division (A)(2)(c) of section 3734.05 of the Revised Code. (C) For regulatory review purposes, the ...

... information required in rule 3745-555-310 of the Administrative Code such that the director can determine if the criteria set forth in rule 3745-555-320 of the Administrative Code are satisfied. (B) An application for a permit to install shall be accompanied by the application fee prescribed in division (A)(2)(c) of section 3734.05 of the Revised Code. (C) For regulatory review purposes, the ...

...four inches by thirty-six inches. (1) The detail engineering plan cover sheet, to be numbered sheet 1, shall contain the following information: (a) The name of the transfer facility. (b) The precise geographic location and boundary of the transfer facility, to be shown on a road map. (c) The name, address, and telephone number of the applicant. (d) The name and address of the owner and operat...

...four inches by thirty-six inches. (1) The detail engineering plan cover sheet, to be numbered sheet 1, shall contain the following information: (a) The name of the transfer facility. (b) The precise geographic location and boundary of the transfer facility, to be shown on a road map. (c) The name, address, and telephone number of the applicant. (d) The name and address of the owner and operat...

... regulatory requirements of section 1327.49 of the Revised Code. This paragraph does not apply to the owner or operator of a transfer facility that consists solely of portable containers and where the waste is not placed on a waste handling floor. (D) Conduct all solid waste storage and handling operations on the waste handling floor, except for the following: (1) Storage of solid waste ...

... regulatory requirements of section 1327.49 of the Revised Code. This paragraph does not apply to the owner or operator of a transfer facility that consists solely of portable containers and where the waste is not placed on a waste handling floor. (D) Conduct all solid waste storage and handling operations on the waste handling floor, except for the following: (1) Storage of solid waste ...

...No later than February 1, 2013, the owner or operator of a class IV composting facility that obtained an acknowledgment of registration prior to April 2, 2012 shall submit a plan view drawing that meets the requirements set forth in rule 3745-560-400 of the Administrative Code.

...thout first having met the following: (1) Obtaining a permit to install in accordance with this rule prior to the construction of a new class I composting facility. (2) Obtaining a solid waste license pursuant to Chapter 3745-501 of the Administrative Code. (3) Executing the financial assurance instrument pursuant to rule 3745-503-05 of the Administrative Code for an amount not less than the current closure cost e...

...t first having met the following: (1) Obtaining a permit to install in accordance with this rule prior to the construction of a new class I composting facility. (2) Obtaining a solid waste license pursuant to Chapter 3745-501 of the Administrative Code. (3) Executing the financial assurance instrument pursuant to rule 3745-503-05 of the Administrative Code for an amount not less than th...

...(A) Compost product distribution. (1) Compost produced from mixed solid waste shall be disposed at a licensed sanitary landfill facility or may be used at a licensed sanitary landfill facility where the operator has obtained authorization for use of such compost in accordance with Chapter 3745-27 of the Administrative Code. (2) Except as provided in paragraph (A)(1) of this rule, an owner or...