Ohio Administrative Code Search

...ure Vessel Code" as referenced in rule 4101:4-3-01 of the Administrative Code. (D) Where a major repair or alteration (including a re-rating) is necessary or desired on an existing boiler which bears the stamp of the appropriate "ASME" symbol or which is stamped with a state of Ohio boiler number, the repair or alteration shall comply with the requirements of "Part 3" of the "NBIC" as referenced in rule 4101:4-3-01 ...

...rt of the "NBIC" as referenced in rule 4101:4-3-01 of the Administrative Code. (B) The rules of the board are not to be retroactively applied to existing boilers or pressure vessels that are not otherwise being altered, repaired, reinstalled, or relocated. Portions of a boiler or pressure vessel not altered or repaired and not affected by an alteration or repair are not required to comply with the code requirements ...

...(A) In accordance with section 4104.05 of the Revised Code, no person shall operate a low pressure steam boiler that has more than three hundred sixty square feet of heating surface, a power steam boiler that has more than three hundred sixty square feet of heating surface, or a stationary steam engine operating at more than thirty horsepower, unless one of the following applies to that person: (...

...(A) In accordance with section 4104.05 of the Revised Code, no person is to operate a low pressure steam boiler that has more than three hundred sixty square feet of heating surface, a power steam boiler that has more than three hundred sixty square feet of heating surface, or a stationary steam engine operating at more than thirty horsepower, unless one of the following applies to that person: (...

...Note: For definitions used in rules 4101:5-1-01 to 4101:5-3-02 of the Administrative Code: (For definitions not contained herein, refer to the " ASME" standards listed in rule 4101:5-3-01 of the Administrative Code.) "ASME" means the "American Society of Mechanical Engineers." Referenced standards, codes, and related technical information developed by this organization can be purchased by logging on to http://ww...

...This rule defines terms used in rules 4101:5-1-01 to 4101:5-3-02 of the Administrative Code. For definitions of terms not contained herein, refer to the " ASME" standards listed in rule 4101:5-3-01 of the Administrative Code. "ASME" means the "American Society of Mechanical Engineers." Referenced standards, codes, and related technical information developed by this organization can be purchased by loggi...

... shall enforce all provisions of rules 4101:5-1-01 to 4101:5-3-02 and rules 1301:3-6-01 to 1301:3-6-06 of the Administrative Code relating to the design, construction, repair, alteration, and maintenance of elevators and elevator controls as defined in rule 4101:5-1-02 of the Administrative Code. Exception: Municipal corporations, such as the city of Cleveland and the city of Cincinnati, which ar...

...iance enforces the provisions of rules 4101:5-1-01 to 4101:5-3-02 and rules 1301:3-6-01 to 1301:3-6-06 of the Administrative Code relating to the design, construction, repair, alteration, and maintenance of elevators and elevator controls as defined in rule 4101:5-1-02 of the Administrative Code. Exception: Municipal corporations, such as the city of Cleveland and the city of Cincinnati, which ar...

...ise specifically provided for in rules 4101:1-30-01 or 4101:5-1-01 to 4101:5-3-02 of the Administrative Code, compliance with the applicable technical provisions and requirements of the standards listed in "Table 4101:5-3-01" of the Administrative Code is prima facie evidence of conformity with accepted engineering practice or with an approved standard governing the design, construction, repair, alteration and mainte...

...ise specifically provided for in rules 4101:1-30-01 or 4101:5-1-01 to 4101:5-3-02 of the Administrative Code, compliance with the applicable technical provisions and requirements of the standards listed in "Table 4101:5-3-01" of this rule is prima facie evidence of conformity with accepted engineering practice or with an approved standard governing the design, construction, repair, alteration and maintenance of eleva...

...As used in Chapter 4101:6-1 of the Administrative Code, the words, terms, and phrases have the following meanings: (A) "Department" means the department of commerce. (B) "Director" means the director of the department of commerce. (C) "Division" means the division of industrial compliance. (D) "Person" means an individual, group of individuals, partnership, corporation, or association. (E) ...

...erned by the requirements of rules 4101:6-1-02, 4101:6-1-03, 4101:6-1-04, 4101:6-1-05, and 4101:6-1-06 of the Administrative Code, except those portions relating to the type and description of filling materials shall apply only when materials are added in remaking, repairing, or renovating. (B) Any person receiving an article of bedding or upholstered furniture for remaking, repairing, or renovat...

... governed by the requirements of rules 4101:6-1-02, 4101:6-1-03, 4101:6-1-04, 4101:6-1-05, and 4101:6-1-06 of the Administrative Code, except those portions relating to the type and description of filling materials shall apply only when materials are added in remaking, repairing, or renovating. (B) Any person receiving an article of bedding or upholstered furniture for remaking, repairing, or renovating shall, while...

...t comply with the requirements of rule 4101:6-1-03 of the Administrative Code and rules and regulations governing sterilization. In addition to the above information, all tags placed on secondhand bedding must contain the vendor's registration number.

... comply with the requirements of rule 4101:6-1-03 of the Administrative Code and rules and regulations governing sanitization or sterilization. In addition to the above information, all tags placed on secondhand bedding must contain the vendor's registration number.

...The purpose of rules 4101:6-1-09 to 4101:6-1-17 of the Administrative Code is to designate terms, definitions, and nomenclature as commonly used and recognized in the manufacture, sale, and distribution of upholstered furniture, bedding, and stuffed toys. Classifications of materials are intended to have understandable meanings to the ultimate consumer. The definitions are in conformity with those adopted b...

...The purpose of rules 4101:6-1-09 to 4101:6-1-17 of the Administrative Code is to designate terms, definitions, and nomenclature as commonly used and recognized in the manufacture, sale, and distribution of upholstered furniture, bedding and stuffed toys. Classifications of materials are intended to have understandable meaning to the ultimate consumer. The definitions are in conformity with those adopted by the majori...

...vided for in paragraph (I) of rule 4101:6-1-02 of the Administrative Code. No percentages are required for stuffed toys. (D) Tolerance: A tolerance of plus or minus ten per cent by weight of the materials listed on the label shall be allowed. The ten per cent tolerance is allowed for the purpose of adjusting unintentional errors due to processing difficulties in arriving at exact percentages....

... provided for in paragraph (I) of rule 4101:6-1-01 of the Administrative Code. No percentages are required for stuffed toys. (D) Tolerance: A tolerance of plus or minus ten per cent by weight of the materials listed on the label shall be allowed. The ten per cent tolerance is allowed for the purpose of adjusting unintentional errors due to processing difficulties in arriving at exact percentages. Tolerance is not in...

...commonly known in cotton mill terms as (1) "cotton comber," (2) "cotton card strips," or "cotton vacuum strips," (3) "cotton fly," and (4) "cotton picker." Either the blanket term "cotton by-produdcts," or the individual terms: "cotton fly," etc., may be used on the law label. (E) "Cotton waste" means any material defined under cotton by-products containing more than seven per cent of trash, hull, leaf, stem, pulp, ...

...nly known in cotton mill terms as: (1) "cotton comber," (2) "cotton card strips," or "cotton vacuum strips," (3) "cotton fly," and (4) "cotton picker." Either the blanket term "cotton by-products" or the individual terms: "cotton fly," etc. may be used on the label. (E) "Cotton waste" means any material defined under cotton by-products containing more than seven per cent of trash, hull, l...

...hall be made in accordance with section 119.03 of the Revised Code and rule 1301-1-01 of the Administrative Code.

...hall be made in accordance with section 119.03 of the Revised Code and rule 1301-1-01 of the Administrative Code.

...al compliance as prescribed under rule 4101:6-1-23 of the Administrative Code. (A) Persons or firms intending to operate sterilization plants shall apply to the "Division of Industrial Compliance, 6606 Tussing Road, P.O. Box 4009, Reynoldsburg, Ohio 43068-4005," and submit in duplicate, application, detailed plans and specifications of equipment and method. (B) No manufacturer, dealer or distributor shall receive o...

... of the division, pursuant to Chapter 3713. of the Revised Code, the installation shall be approved. (B) The division shall make inspections from time to time to determine whether the sterilizer is fully complying with all of the provisions of rules 4101:6-1-21 to 4101:6-1-25 of the Administrative Code. (C) Accurate records accessible to agents of the division shall be kept in bound ledger by operator of treatment ...