Ohio Administrative Code Search

...olicy years commencing on or after July 1, 2019 . BWC will estimate annual premium based on payroll from the most recently completed policy year. The notice shall include all the following: (1) The estimated payroll used by the coal workers' pneumoconiosis fund to calculate the employer's estimated premium due; (2) The manual classification(s) in use by the coal workers' pneumoconiosis fund...

...authorization (as required by rule 4123:1-1-02 of the Administrative Code) the employer shall maintain the elevator and appurtenances in the following respects: (1) Hoistways and pits. Hoistways and pits shall be kept clean and free of dirt and rubbish and shall not be used for storage purposes. Water shall not be allowed to accumulate in the pits. (2) Machine rooms. Machine room floors sh...

... other authorization, pursuant to rule 4123:1-1-02 of the Administrative Code, the employer shall maintain the elevator and appurtenances in the following respects: (1) Hoistways and pits. Hoistways and pits shall be kept clean and free of dirt and rubbish and not be used for storage purposes. Water shall not be allowed to accumulate in the pits. (2) Machine rooms. Machine room floors shal...

...prior to said date. (B) Definitions. (1) "Air contaminants" means hazardous concentrations of fibrosis-producing or toxic dusts, toxic fumes, toxic mists, toxic vapors, or toxic gases, or a combination of these, suspended in the atmosphere. (2) "Approved" means sanctioned, endorsed, accredited, certified, or accepted as satisfactory by a duly constituted and nationally recognized authority or ...

...prior to said date. (B) Definitions. (1) "Air contaminants" means concentrations of dust, mist, fume, gas, or vapor, or any combination thereof when suspended in the atmosphere. (2) "Approved" means accepted or certified by a nationally recognized testing laboratory, such as "UL Solutions," "FM Approvals," or a responsible government agency. (3) "Danger zone" means the point of operation w...

...the health or safety of the employee. (1) Eye and face protection. (2) Foot (toe) protection. (3) Respiratory protection - includes respirators, masks, canister type masks, supplied-air helmets, etc., for protection of the respiratory system from inhalation of particulate matter, noxious gases and vapors, and oxygen deficiency. Although this rule does not cover engineered protective measure...

...the health or safety of the employee. (1) Eye and face protection. (2) Foot and toe protection. (3) Respiratory protection, such as respirators, masks, canister type masks, or supplied-air helmets for protection of the respiratory system from inhalation of particulate matter, noxious gases and vapors, and oxygen deficiency. Although this rule does not cover engineered protective measures su...

...airways or runways. (B) Definitions. (1) "Handrail" means a rail used to provide employees with a handhold for support. (2) "Hole" means a gap or void two inches (5.1 cm) or more in its least dimension, in a floor, roof, or other walking/working surface (3) "Nose (nosing)" means that portion of a tread projecting beyond the face of the riser immediately below. (4) "Platform" means a working ...

...airways or runways. (B) Definitions. (1) "Handrail" means a rail used to provide employees with a handhold for support. (2) "Hole" means a gap or void two inches (5.1 centimeters) or more in its least dimension, in a floor, roof, or other walking or working surface. (3) "Nose" or "nosing" means that portion of a tread projecting beyond the face of the riser immediately below. (4) "Platform" m...

...(A) Scope. (1) This rule provides for the protection of employees from motion hazards associated with equipment used in the mechanical transmission of power on construction sites. Installations to be guarded include sources of mechanical power, the associated and intermediate equipment and the driven machines up to, but excluding, the point of operation. This pertains to revolving, oscillating, r...

...(A) Scope. (1) This rule provides for the protection of employees from motion hazards associated with equipment used in the mechanical transmission of power on construction sites. Installations to be guarded include sources of mechanical power, the associated and intermediate equipment, and the driven machines up to, but excluding, the point of operation. This provision pertains to revolving, osc...

...(A) Reserved. (B) Definitions. (1) "Earthmoving equipment" means, but is not limited to, scrapers, loaders, crawlers or wheel tractors, bulldozers, off-highway trucks, graders, agricultural and industrial tractors, shovels and backhoes. (2) "Jacked piles" means a method of driving horizontal piles for under supports of existing buildings by the use of hydraulic jacks. (3) "Motor vehicles" ...

...(A) Reserved. (B) Definitions. (1) "Earthmoving equipment" means, but is not limited to, scrapers, loaders, crawlers, wheel tractors, bulldozers, off-highway trucks, graders, agricultural tractors, industrial tractors, power shovels, and backhoes. (2) "Jacked piles" means a method of driving horizontal piles for under supports of existing buildings by the use of hydraulic jacks. (3) "Motor ...

...(A) Reserved. (B) Definitions. (1) "Derrick" means an apparatus consisting of a mast or equivalent members held at the top by guys or braces, with or without a boom, for use with a hoisting mechanism and operating ropes. (2) "Derrick, A-frame" means a derrick in which the boom is hinged from a crossmember between the bottom ends of two upright members spread apart at the lower ends and united at the top, the upper...

...

...

...

...(A) Reserved. (B) Definitions. (1) "Bearer" means a horizontal member of a scaffold upon which the platform rests and which may be supported by ledgers. (2) "Boatswain's chair" means a seat supported by slings attached to a suspended rope, designed to accommodate one employee in a sitting position. (3) "Brace" means a tie that holds one scaffold member in a fixed position with respect to anoth...

...

...(A) Reserved. (B) Definitions. (1) "Cleat ladder" means a ladder consisting of one section having two side rails and steps formed of cleats attached to the side rails with fillers between the cleats. (2) "Extension ladder" means a portable ladder, adjustable in length. It consists of two or more sections traveling in guides or brackets so arranged as to permit length adjustment. Its size is designated by the sum o...

...(A) Reserved. (B) Definitions. (1) "Cleat ladder" means a ladder consisting of one section having two side rails and steps formed of cleats attached to the side rails with fillers between the cleats. (2) "Extension ladder" means a portable ladder, adjustable in length, consisting of two or more sections traveling in guides or brackets so arranged as to permit length adjustment. The size of ...

...(A) Reserved. (B) Definitions. (1) "Portable explosive-actuated fastening tool (powder-actuated)" means a tool which depends upon an explosive charge to propel or discharge a stud, pin, or fastener for the purpose of impinging it upon, affixing it to, or penetrating another object or material. (a) "High velocity tool" means a tool or machine which, when used with a load, propels or discharges a stud, pin, or faste...

...(A) Reserved. (B) Definitions. (1) "Portable explosive-actuated fastening tool " means a powder-actuated tool which depends upon an explosive charge to propel or discharge a stud, pin, or fastener for the purpose of impinging it upon, affixing it to, or penetrating another object or material. (a) "High velocity tool" means a tool or machine which, when used with a load, propels or discharges a ...

...(A) Reserved. (B) Definitions. (1) "Accepted engineering requirements (or practices)" means those requirements or practices which are compatible with standards required by a registered architect, a registered professional engineer, or other duly licensed or recognized authority. (2) "Angle of repose" means the greatest angle above the horizontal plane at which material will lie without slid...

...(A) Reserved. (B) Definitions. (1) "Accepted engineering requirements " means those requirements or practices which are compatible with standards required by a registered architect, a registered professional engineer, or other duly licensed or recognized authority. (2) "Angle of repose" means the greatest angle above the horizontal plane at which material will lie without sliding. (3) "Bra...