Ohio Administrative Code Search
| Rule |
|---|
|
Rule 4101:3-14-01 | Subsurface landscape irrigation systems.
... |
|
Rule 4101:3-14-01 | Subsurface graywater soil absorption systems.
... |
|
Rule 4101:3-15-01 | Referenced standards.
... |
|
Rule 4101:3-15-01 | Referenced standards.
... |
|
Rule 4101:3-15-01 | Referenced standards.
... |
|
Rule 4101:4-1-01 | Definitions and abbreviations.
...As used in Chapters 4101:4-1 to 4101:4-10 of the Administrative Code, (A) "Alteration" means any change in the item described on the original manufacturer's data report which affects the pressure containing capability of the boiler or pressure vessel. Non physical changes such as an increase in the maximum allowable working pressure (internal or external) or design temperature of a boiler or pressure vessel shall be... |
|
Rule 4101:4-1-01 | Definitions and abbreviations.
...As used in Chapters 4101:4-1 to 4101:4-10 of the Administrative Code, (A) "Alteration" means any change in the item described on the original manufacturer's data report which affects the pressure containing capability of the boiler or pressure vessel. Non physical changes such as an increase in the maximum allowable working pressure (internal or external) or design temperature of a boiler or pr... |
|
Rule 4101:4-2-01 | Scope, administration, and enforcement.
...(A) All boilers and pressure vessels proposed for use in the state of Ohio shall be designed, constructed, installed, altered, repaired, maintained, and operated in accordance with the rules adopted by the board as prescribed in Chapters 4101:4-1 to 4101:4-10 of the Administrative Code, except as follows: (1) Boilers, pressure vessels, and stationary steam engines under federal control or subject to inspection under... |
|
Rule 4101:4-2-01 | Scope, administration, and enforcement.
...(A) All boilers and pressure vessels proposed for use in the state of Ohio are to be designed, constructed, installed, altered, repaired, maintained, and operated in accordance with the rules adopted by the board as prescribed in Chapters 4101:4-1 to 4101:4-10 of the Administrative Code, except as follows: (1) Boilers, pressure vessels, and stationary steam engines under federal control or subjec... |
|
Rule 4101:4-3-01 | Accepted engineering practice and approved standards.
...(A) Where references are made in Chapters 4101:4-1 to 4101:4-10 of the Administrative Code to the applicable section of the "ASME Boiler and Pressure Vessel Code" or to other standards or publications, this rule identifies the specific edition of the code, standard, or publication that is adopted. Conformity to the applicable technical provisions, requirements, recommendations, and determinations in the codes, standa... |
|
Rule 4101:4-3-01 | Accepted engineering practice and approved standards.
...(A) Where references are made in Chapters 4101:4-1 to 4101:4-10 of the Administrative Code to the applicable section of the "ASME Boiler and Pressure Vessel Code" or to other standards or publications, this rule identifies the specific edition of the code, standard, or publication that is adopted. Conformity to the applicable technical provisions, requirements, recommendations, and determinations in the codes, standa... |
|
Rule 4101:4-4-01 | Design of boilers and pressure vessels.
...(A) All new boilers and pressure vessels proposed for use in the state of Ohio, except those exempt by division (A) of section 4104.04 of the Revised Code, shall be designed in accordance with the applicable approved referenced standard(s) adopted in "Table 4101:4-3-01" of rule 4101:4-3-01 of the Administrative Code and other requirements as prescribed in rules 4101:4-4-01 to 4101:4-4-04 of the Administrative Code. ... |
|
Rule 4101:4-4-01 | Design of boilers and pressure vessels.
...(A) All new boilers and pressure vessels proposed for use in the state of Ohio, except those exempt by division (A) of section 4104.04 of the Revised Code, are to be designed in accordance with the applicable approved referenced standard(s) adopted in "Table 4101:4-3-01" of rule 4101:4-3-01 of the Administrative Code and other requirements as prescribed in rules 4101:4-4-01 to 4101:4-4-04 of the ... |
|
Rule 4101:4-4-03 | Safety devices and controls.
...(A) All boilers and pressure vessels shall be provided with the necessary safety appliances and controls that will prevent pressure and temperature from rising above the design limits. The required safety devices and controls shall be as required in the applicable section of the "ASME Boiler and Pressure Vessel Code" as referenced in rule 4101:4-3-01 of the Administrative Code. (B) The operation of a boiler or press... |
|
Rule 4101:4-4-03 | Safety devices and controls.
...(A) All boilers and pressure vessels are to be provided with the necessary safety appliances and controls that will prevent pressure and temperature from rising above the design limits. The required safety devices and controls are to be installed and tested as required in the applicable section of the "ASME Boiler and Pressure Vessel Code" and the applicable parts of the "NBIC" as referenced in ... |
|
Rule 4101:4-4-04 | Steam boiler blowoff systems.
...(A) The blowoff from boilers may be discharged directly to any place such as a lake, swamp, stream, sump, or open pit provided there is no hazard to life or property. Where a safe place of discharge is not available, a blowoff tank shall be used. The tank shall be designed to separate the flash steam from the water and shall be flashed to a lower pressure system or vented to the atmosphere. The vent shall be large en... |
|
Rule 4101:4-4-04 | Steam boiler blowoff systems.
...(A) The blowoff from boilers may be discharged directly to any place such as a lake, swamp, stream, sump, or open pit provided there is no hazard to life or property. Where a safe place of discharge is not available, a blowoff tank is to be used. The tank is to be designed to separate the flash steam from the water and is to be flashed to a lower pressure system or vented to the atmosphere. The vent is to be large en... |
|
Rule 4101:4-6-01 | Construction and stamping of boilers and pressure vessels.
...Unless exempt by rule 4101:4-2-01 of the Administrative Code, (A) All boilers and pressure vessels shall be constructed and tested in accordance with the applicable section(s) of the "ASME Boiler and Pressure Vessel Code" as referenced in rule 4101:4-3-01 of the Administrative Code. (B) All boilers and pressure vessels shall be inspected during construction and after completion by an authorized inspector to determi... |
|
Rule 4101:4-6-01 | Construction and stamping of boilers and pressure vessels.
...Unless exempt by rule 4101:4-2-01 of the Administrative Code, (A) All boilers and pressure vessels are to be constructed and tested in accordance with the applicable section(s) of the "ASME Boiler and Pressure Vessel Code" as referenced in rule 4101:4-3-01 of the Administrative Code. (B) All boilers and pressure vessels are to be inspected during construction and after completion by an authorized ... |
|
Rule 4101:4-9-01 | Existing boilers and pressure vessels.
...(A) All existing boilers and pressure vessels and the associated equipment, controls, devices, and safeguards shall be maintained in a safe and sanitary condition, in good working order, and free of leaks and defects. The owner or the owner's designated agent shall be responsible for the maintenance of such boilers and pressure vessels and associated equipment, controls, devices, and safeguards. (B) The rules of the... |
|
Rule 4101:4-9-01 | Existing boilers and pressure vessels.
...(A) All existing boilers and pressure vessels and the associated equipment, controls, devices, and safeguards are to be maintained in a safe and sanitary condition, in good working order, and free of leaks and defects. The owner or the owner's designated agent is responsible for the maintenance of such boilers and pressure vessels and associated equipment, controls, devices, and safeguards. If the original stamping,... |
|
Rule 4101:4-10-01 | Licensure and attendance requirements of operators.
...(A) In accordance with section 4104.05 of the Revised Code, no person shall operate a low pressure steam boiler that has more than three hundred sixty square feet of heating surface, a power steam boiler that has more than three hundred sixty square feet of heating surface, or a stationary steam engine operating at more than thirty horsepower, unless one of the following applies to that person: (... |
|
Rule 4101:4-10-01 | Licensure and attendance requirements of operators.
...(A) In accordance with section 4104.05 of the Revised Code, no person is to operate a low pressure steam boiler that has more than three hundred sixty square feet of heating surface, a power steam boiler that has more than three hundred sixty square feet of heating surface, or a stationary steam engine operating at more than thirty horsepower, unless one of the following applies to that person: (... |
|
Rule 4101:5-1-02 | Definitions.
...Note: For definitions used in rules 4101:5-1-01 to 4101:5-3-02 of the Administrative Code: (For definitions not contained herein, refer to the " ASME" standards listed in rule 4101:5-3-01 of the Administrative Code.) "ASME" means the "American Society of Mechanical Engineers." Referenced standards, codes, and related technical information developed by this organization can be purchased by logging on to http://ww... |
|
Rule 4101:5-1-02 | Definitions.
...This rule defines terms used in rules 4101:5-1-01 to 4101:5-3-02 of the Administrative Code. For definitions of terms not contained herein, refer to the " ASME" standards listed in rule 4101:5-3-01 of the Administrative Code. "ASME" means the "American Society of Mechanical Engineers." Referenced standards, codes, and related technical information developed by this organization can be purchased by loggi... |