Skip to main content
Back To Top Top Back To Top
The Legislative Service Commission staff updates the Revised Code on an ongoing basis, as it completes its act review of enacted legislation. Updates may be slower during some times of the year, depending on the volume of enacted legislation.

Section 4511.62 | Stopping at railroad grade crossing.

 

(A)(1) Whenever any person driving a vehicle or trackless trolley approaches a railroad grade crossing, the person shall stop within fifty feet, but not less than fifteen feet from the nearest rail of the railroad if any of the following circumstances exist at the crossing:

(a) A clearly visible electric or mechanical signal device gives warning of the immediate approach of a train.

(b) A crossing gate is lowered.

(c) A flagperson gives or continues to give a signal of the approach or passage of a train.

(d) There is insufficient space on the other side of the railroad grade crossing to accommodate the vehicle or trackless trolley the person is operating without obstructing the passage of other vehicles, trackless trolleys, pedestrians, or railroad trains, notwithstanding any traffic control signal indication to proceed.

(e) An approaching train is emitting an audible signal or is plainly visible and is in hazardous proximity to the crossing.

(f) There is insufficient undercarriage clearance to safely negotiate the crossing.

(2) A person who is driving a vehicle or trackless trolley and who approaches a railroad grade crossing shall not proceed as long as any of the circumstances described in divisions (A)(1)(a) to (f) of this section exist at the crossing.

(B) No person shall drive any vehicle through, around, or under any crossing gate or barrier at a railroad crossing while the gate or barrier is closed or is being opened or closed unless the person is signaled by a law enforcement officer or flagperson that it is permissible to do so.

(C) Whoever violates this section is guilty of a misdemeanor of the fourth degree.

Available Versions of this Section