Skip to main content
Back To Top Top Back To Top
This website publishes administrative rules on their effective dates, as designated by the adopting state agencies, colleges, and universities.

Rule 3745-18-02 | General countywide emission limits.

 

No owner or operator of any coal-fired steam generating unit in the following counties shall cause or permit the emission of sulfur dioxide from any source to exceed the following limits:

(A)

(1) For sources in Adams county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(2) For sources in Ashland county, a maximum of 7.2 pounds of sulfur dioxide per MM Btu actual heat input.

(3) For sources of Auglaize county, a maximum of 2.6 pounds of sulfur dioxide per MM Btu actual heat input.

(B)

(1) For sources in Belmont county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(2) For sources in Brown county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(C)

(1) For sources in Carroll county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(2) For sources in Champaign county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(3) For sources in Clark county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(4) For sources in Clermont county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(5) For sources in Clinton county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(6) For sources in Columbiana county, a maximum of 4.4 pounds of sulfur dioxide per MM Btu actual heat input.

(7) For sources in Coshocton county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(D)

(1) For sources in Darke county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(2) For sources in Delaware county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(E) [Reserved.]

(F)

(1) For sources in Fairfield county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(2) For sources in Fayette county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(3) For sources in Fulton county, a maximum of 2.6 pounds of sulfur dioxide per MM Btu actual heat input.

(G)

(1) For sources in Geauga county, a maximum of 7.2 pounds of sulfur dioxide per MM Btu actual heat input.

(2) For sources in Guernsey county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(H)

(1) For sources in Hancock county, a maximum of 2.6 pounds of sulfur dioxide per MM Btu actual heat input.

(2) For sources in Hardin county, a maximum of 2.6 pounds of sulfur dioxide per MM Btu actual heat input.

(3) For sources in Harrison county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(4) For sources in Henry county, a maximum of 2.6 pounds of sulfur dioxide per MM Btu actual heat input.

(5) For sources in Highland county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(6) For sources in Hocking county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(7) For sources in Holmes county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(8) For sources in Huron county, a maximum of 8.0 pounds of sulfur dioxide per MM Btu actual heat input.

(I) [Reserved.]

(J) For sources in Jackson county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(K) For sources in Knox county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(L)

(1) For sources in Lawrence county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(2) For sources in Licking county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(3) For sources in Logan county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(M)

(1) For sources in Madison county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(2) For sources in Marion county, a maximum of 6.1 pounds of sulfur dioxide per MM Btu actual heat input.

(3) For sources in Medina county, a maximum of 8.0 pounds of sulfur dioxide per MM Btu actual heat input.

(4) For sources in Meigs county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(5) For sources in Mercer county, a maximum of 8.0 pounds of sulfur dioxide per MM Btu actual heat input.

(6) For sources in Monroe county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(7) For sources in Morgan county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(8) For sources in Morrow county, a maximum of 2.6 pounds of sulfur dioxide per MM Btu actual heat input.

(N) For sources in Noble county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(O) [Reserved.]

(P)

(1) For sources in Perry county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(2) For sources in Pickaway county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(3) For sources in Pike county, a maximum of 7.0 pounds of sulfur dioxide per MM Btu actual heat input.

(4) For sources in Portage county, a maximum of 7.2 pounds of sulfur dioxide per MM Btu actual heat input.

(5) For sources in Preble county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(6) For sources in Putnam county, a maximum of 2.6 pounds of sulfur dioxide per MM Btu actual heat input.

(Q) [Reserved.]

(R) For sources in Richland county, a maximum of 7.1 pounds of sulfur dioxide per MM Btu actual heat input.

(S)

(1) For sources in Scioto county, a maximum of 6.9 pounds of sulfur dioxide per MM Btu actual heat input.

(2) For sources in Shelby county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(T) [Reserved.]

(U) For sources in Union county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(V)

(1) For sources in Van Wert county, a maximum of 2.6 pounds of sulfur dioxide per MM Btu actual heat input.

(2) For sources in Vinton county, a maximum of 4.5 pounds of sulfur dioxide per MM Btu actual heat input.

(W)

(1) For sources in Warren county, a maximum of 3.6 pounds of sulfur dioxide per MM Btu actual heat input.

(2) For sources in Wood county, a maximum of 2.6 pounds of sulfur dioxide per MM Btu actual heat input.

(3) For sources in Wyandot county, a maximum of 2.6 pounds of sulfur dioxide per MM Btu actual heat input.

Last updated February 3, 2022 at 8:51 AM

Supplemental Information

Authorized By: 3704.03(E)
Amplifies: 3704.03(A), 3704.03(E)
Five Year Review Date: 11/9/2026