Rule 3745-51-762 | Alternative standards for valves in gas or vapor service or in light liquid service; skip period leak detection and repair - equipment leaks.
(A) A remanufacturer or other person who stores or treats the hazardous secondary material subject to the requirements of rule 3745-51-757 of the Administrative Code may elect for all valves within a hazardous secondary material management unit to comply with one of the alternative work practices specified in paragraphs (B)(2) and (B)(3) of this rule.
(B)
(1) A remanufacturer or other person who stores or treats the hazardous secondary material shall comply with the requirements for valves, as described in rule 3745-51-757 of the Administrative Code, except as described in paragraphs (B)(2) and (B)(3) of this rule.
(2) After two consecutive quarterly leak detection periods with the percentage of valves leaking equal to or less than two per cent, a remanufacturer or other person who stores or treats the hazardous secondary material may begin to skip one of the quarterly leak detection periods (i.e., monitor for leaks once every six months) for the valves subject to the requirements in rule 3745-51-757 of the Administrative Code.
(3) After five consecutive quarterly leak detection periods with the percentage of valves leaking equal to or less than two per cent, a remanufacturer or other person who stores or treats the hazardous secondary material may begin to skip three of the quarterly leak detection periods (i.e., monitor for leaks once every year) for the valves subject to the requirements in rule 3745-51-757 of the Administrative Code.
(4) If the percentage of valves leaking is greater than two per cent, the remanufacturer or other person who stores or treats the hazardous secondary material shall monitor monthly in compliance with the requirements in rule 3745-51-757 of the Administrative Code, but may again elect to use this rule after meeting the requirements of paragraph (C)(1) of rule 3745-51-757 of the Administrative Code.
Last updated June 12, 2023 at 9:03 AM