Rule 3745-555-320 | Permit to install issuance.
(A) When acting on a permit to install, the director shall follow the appropriate procedures set forth in rule 3745-500-120 of the Administrative Code, Chapter 3745-49 of the Administrative Code, and section 3734.09 of the Revised Code.
(B) An application, notwithstanding any deficiency, may be considered and acted upon if sufficient information is contained in the detail engineering plans, specifications, and information for the director to determine whether the criteria set forth in this rule are satisfied.
(C) Criteria for issuance. Except as provided in paragraph (B) of this rule, the director shall not issue a permit to install for a solid waste transfer facility unless the director determines that the following criteria are satisfied:
(1) The transfer facility is capable of being constructed, operated, and closed in compliance with Chapters 3704., 3714., 3734., and 6111. of the Revised Code and rules adopted thereunder.
(2) The permit to install application demonstrates that the transfer facility will conform to the siting criteria contained in rules 3745-555-110 to 3745-555-150 of the Administrative Code.
(3) The permit to install application demonstrates that the transfer facility is designed in accordance with rule 3745-555-200 of the Administrative Code.
Last updated February 6, 2024 at 10:03 AM
Supplemental Information