Rule 3745-580-405 | Exclusions from the requirement to obtain a scrap tire recovery facility permit to install or registration certificate.
(A) The owner or operator of the following are excluded from the requirement to obtain a scrap tire recovery facility permit to install or registration certificate:
(1) A solid waste incineration or energy recovery facility that is designed, constructed, and used for the primary purpose of incinerating mixed municipal solid waste and that burns scrap tires in conjunction with mixed municipal solid wastes.
(2) A tire retreading business, tire manufacturing finishing center, or tire adjustment center that stores not more than four thousand scrap tires in a single covered scrap tire storage area on the premises.
(3) Any person in the course of business solely applying colorant to TDC for use as mulch.
(4) Any person in the course of business solely manufacturing products from crumb rubber including but not limited to molded rubber products.
(B) The owner or operator of an excluded facility may only use one of the exclusions from the scrap tire facility permitting or registration requirements specified in rules 3745-580-205, 3745-580-305, and 3745-580-405 of the Administrative Code.
(C) Unless specified in the authorizing document, the owner or operator meeting an exclusion specified in paragraph (A)(1) of this rule shall store scrap tires in compliance with paragraph (E)(1) of rule 3745-580-410 of the Administrative Code.
[Comment: An operation that meets an exclusion specified in paragraph (A)(2) of this rule is subject to the mosquito control and storage requirements specified in rule 3745-580-05 of the Administrative Code.]
Last updated January 8, 2024 at 2:29 PM
Supplemental Information