Ohio Administrative Code Search

...ste facility in accordance with Chapter 1509. of the Revised Code and rules adopted under it. (B) No person may allow brine or other waste substances at an oil and gas waste facility to migrate into an underground source of drinking water. (C) Not later than one hundred eighty days after the effective date of this rule, a person operating an oil and gas waste facility under a chief's order must ...

...rule, all of the following apply: (1) On and after the effective date of this rule, no person may begin construction of or modify, amend, alter, or revise an oil and gas waste facility prior to issuance of a permit by the chief approving an application submitted under this rule. (2) A permit is specific to the location at which an oil and gas waste facility is located and the location cannot be ...

...ntity defined as a person under section 1.59 of the Revised Code. (G) "Chief" means chief, division of mineral resources management. (H) "Division" means division of mineral resources management, Ohio department of natural resources. (I) "Subject tract" means a tract upon which a person proposes to drill, reopen, deepen, plug back, or rework a well for the injection of fluids. (J) "Well" means any borehole, whe...

...A) Each input well permitted after June 1, 1982 shall be constructed in the following manner: (1) Surface casing shall be free of apparent defects and set at least fifty feet below the deepest underground source of water containing less than ten thousand mg/L total dissolved solids or less than five thousand mg/L chlorides, and sealed by circulating cement to the surface under the supervision of the division. In the...

...e authorized by rule until November 27, 1985 if the following requirements are met. (1) Any operator of such a project must apply for a permit before November 27, 1984. (2) Authorization by rule shall expire: (a) Upon the date of issuance of the permit or permit denial if a permit application has been filed as specified in paragraph (D)(1) of rule 1501:9-7-07 of the Administrative Code; (b) On November 28, 1984 i...

...horized by rule in accordance with rule 1501:9-7-05 of the Administrative Code. (B) Establishing permit conditions. (1) In addition to conditions required for all permits, the chief shall establish conditions, as required on a case-by-base basis, for all permits under the following: paragraph (Q) of this rule (duration of permits), paragraph (C) of this rule (schedules of compliance), and paragraph (B) of rule 1501...

...l be considered as permit conditions. (1) A solution mining project may not commence injection until construction is complete, and (a) The permittee has submitted notice of completion of construction to the chief, and (b) The chief has inspected or otherwise reviewed the new project and finds it is in compliance with the conditions of the permit; or (c) The permittee has not received notice from the chief of his ...

...ing well has mechanical integrity if: (1) There is no significant leak in the casing, tubing, or packer; and (2) There is no significant fluid movement into an underground source of drinking water through vertical channels adjacent to the well-bore. (B) One of the following methods shall be used to evaluate the absence of significant leaks under paragraph (A)(1) of this rule: (1) Monitoring of annulus pressure; o...

...As used in Chapter 1501:9-8 of the Administrative Code: (A) "Blowout" means an unplanned and uncontrolled flow of fluids or gases from a well when that well cannot be controlled by previously installed barriers or devices. (B) "Brine" has the same meaning as in section 1509.01 of the Revised Code. (C) "Environment" means navigable waters and any other surface water, groundwater, drinking water supply, land surfac...

...As used in Chapter 1501:9-8 of the Administrative Code: (A) "Blowout" means an unplanned and uncontrolled flow of fluids or gases from a well when that well cannot be controlled by previously installed barriers or devices. (B) "Environment" means navigable waters and any other surface water, groundwater, drinking water supply, land surface, subsurface strata, or ambient air. (C) "Emergency Manage...

...mpracticable under the circumstances: (1) A release of gas associated with a reporting person's production operation or a reporting person's other activity regulated under Chapter 1509. of the Revised Code or under division 1501:9 of the Administrative Code that results from a blowout, an uncontrolled pop-off valve release in an urban area, or any release of gas that threatens public safety; (2) A release of hydrog...

...cticable under the circumstances: (1) A release of gas associated with a reporting person's production operation or a reporting person's other activity regulated under Chapter 1509. of the Revised Code or under division 1501:9 of the Administrative Code that results from a blowout, an uncontrolled pop-off valve release in an urban area, or any release of gas that threatens public safety; (2)...

...(A) Except as provided in rule 1501:9-11-05 of the Administrative Code, a person may plug or plug back a well only pursuant to the three following options: (1) A valid permit to plug issued under section 1509.13 of the Revised Code or a valid permit to plug back issued under section 1509.06 of the Revised Code; (2) Division (C) of section 1509.13 of the Revised Code; or (3) Plugging operations ...

...(A) Except as provided in rule 1501:9-11-05 of the Administrative Code, a person may plug or plug back a well only pursuant to the three following options: (1) A valid permit to plug issued under section 1509.13 of the Revised Code or a valid permit to plug back issued under section 1509.06 of the Revised Code; (2) Division (C) of section 1509.13 of the Revised Code; or (3) Plugging operations ...

...equired under paragraph (E) of rule 1501:9-11-02 of the Administrative Code has to protect all USDWs and provide a means of well control for completion of plugging operations. Any casing installed in the well has to be according to the standards established in rule 1501:9-1-08 of the Administrative Code.

... set forth in paragraph (E) of rule 1501:9-11-02 of the Administrative Code has to protect all USDWs and provide a means of well control for completion of plugging operations. Any casing installed in the well has to be installed in accordance with the standards established in rule 1501:9-1-08 of the Administrative Code.

...dards that are referenced in division 1501:9 of the Administrative Code. Such standards shall be incorporated by reference into and considered part of the requirements of these rules to the prescribed extent of each such reference. The industry standards are listed herein by the organization setting the standard, the standard identification number and title, the date, and, if available, the edition of the ...

...As used in Chapters 1501:10-1 and 1501:10-2 of the Administrative Code: (A) "Chief" means the chief of the division of mineral resources management of the Ohio department of natural resources. (B) "MSHA" means the mine safety and health administration in the United States department of labor.

...l meet the requirements of 30 C.F.R. 75.1103-1 to 30 C.F.R. 75.1103-8. (B) The operator shall follow a procedure that meets the requirements of 30 C.F.R. 75.1103-8 for the inspection of the fire detection devices installed on each conveyor belt. (C) Initial approval of fire detection devices. (1) Existing underground coal operators. Within thirty days of the effective date of this rule, each existing underground c...

...et the requirements of 30 C.F.R. 75.1103-1 to 30 C.F.R. 75.1103-8. (B) The operator shall follow a procedure that meets the requirements of 30 C.F.R. 75.1103-8 for the inspection of the fire detection devices installed on each conveyor belt. (C) Initial approval of fire detection devices. (1) Existing underground coal operators. Within thirty days of the effective date of this rule, each ex...

...e with the requirements of 30 C.F.R. 75.1714-6 and paragraphs (a)(1) and (b) of 30 C.F.R. 75.1714-4. (D) Inspection and approval of the use of tag lines and tie-off lines in a mine. As part of the regular quarterly inspection of a mine pursuant to section 1561.31 of the Revised Code, a deputy mine inspector shall inspect tag lines and tie-off lines to verify that they meet the requirements of this rule and section 1...

...nes in accordance with 30 C.F.R. 75.1714-6 and paragraphs (a)(1) and (b) of 30 C.F.R. 75.1714-4. (D) Inspection and approval of the use of tag lines and tie-off lines in a mine. As part of the regular quarterly inspection of a mine pursuant to section 1561.31 of the Revised Code, a deputy mine inspector will inspect tag lines and tie-off lines to verify that they meet this rule and section 15...

...al responder, as defined in section 1565.15 of the Revised Code, shall be trained and certified in accordance with this rule. Mine medical responder training shall include all of the following: (1) An initial mine medical responder training course of a minimum of eighty-three hours, taught by a mine medical responder certification instructor. The training course shall be developed by the mine...

...al responder, as defined in section 1565.15 of the Revised Code, shall be trained and certified in accordance with this rule. Mine medical responder training will include all of the following: (1) An initial mine medical responder training course of a minimum of eighty-three hours, taught by a mine medical responder certification instructor. The training course will be developed by the mine s...

...ces included in the rules of Chapters 1501:10-1 and 1501:10-2 of the Administrative Code can generally be found in public libraries or electronically at the website http://www.gpo.gov/fdsys/. The publishing date for Title 30 is July 1, 2018. These regulations are: (A) 30 C.F.R. Part 7; (B) 30 C.F.R. Part 40; (C) 30 C.F.R. Part 48; (D) 30 C.F.R. Part 50; (E) 30 C.F.R. Part 75.