Ohio Administrative Code Search

.... (N) "NPDES" means national pollutant discharge elimination system. (O) (1) "One year" means two thousand eighty hours when referring to operating experience. This is equal to forty hours per week for fifty-two weeks. When referring to educational experience one year shall constitute at least four hundred fifty hours of applicable course work. (a) "Nine months" means fifteen hundred sixty h...

...

...the channel required to carry the flood discharge. (4) "Formation stabilizer" or "filter pack" means siliceous, well-rounded, clean and uniform sand or gravel that is free of contaminants and foreign matter, properly sized, washed and placed between the borehole wall and the well screen to prevent formation material from entering through the screen and to stabilize the borehole. (G) (1) "Granu...

...the channel required to carry the flood discharge. (4) "Formation stabilizer" or "filter pack" means siliceous, well-rounded, clean and uniform sand or gravel that is free of contaminants and foreign matter, properly sized, washed and placed between the borehole wall and the well screen to prevent formation material from entering through the screen and to stabilize the borehole. (G) (1) "Gran...

...e attached to the casing, or suction or discharge line by a watertight connection, or shall have a base plate that conforms to paragraph (A)(10) of this rule. (c) A submersible pump motor shall not have a mercury seal. (d) Below ground water service pipe shall be maintained under system pressure at all times. A check valve shall not be installed between a pitless adapter or pitless unit and the pressure tank. (e)...

...e attached to the casing, or suction or discharge line by a watertight connection, or shall have a base plate that conforms to paragraph (A)(10) of this rule. (c) A submersible pump motor shall not have a mercury seal. (d) Below ground water service pipe shall be maintained under positive pressure at all times. A check valve or backflow prevention assembly, shall not be installed between a pitless adapter or pitle...

... under the well cap. (d) Flowing well discharge control shall be provided to conserve ground water and to prevent the loss of artesian head by preventing or reducing continuous discharges. Flow control shall consist of one of the following methods: (i) The extension of the well casing to an altitude corresponding to that of the artesian head. (ii) Installation of a vermin proof cap...

...t does not require a national pollutant discharge elimination system permit under section 6111.03 of the Revised Code or an injection well drilling or operating permit issued under section 6111.043 of the Revised Code. (G) "Treatment works" means any plant, disposal field, lagoon, dam, pumping station, building sewer connected directly to treatment works, incinerator, or other works used for the purpose of treating,...

...se in the quantity of pollutants in the discharges from a treatment works or sewerage system, to any waters of the state; and (2) The delivery of wastewater in excess of the capacity of the treatment works or sewerage system beyond its original design capabilities to treat the wastestream; or (3) Violations, or the contribution to a pattern of ongoing violations, of the limits or terms and conditions of a national ...

...nit shall operate the unit so as to discharge, or allow to be discharged, NOx emissions to the atmosphere without accounting for all such emissions in accordance with the applicable provisions of paragraphs (A) to (G) of this rule and 40 CFR Part 75 except as provided for in 40 CFR 75.74. (c) No owner or operator of a NOx budget unit shall disrupt the continuous emission monitoring system, any po...

...aterial, the use of which may cause the discharge of an air contaminant into the open air, but not including that equipment defined as a fossil fuel fired steam generator. (14) "Process weight" means the total weight of all materials introduced into the source operation including solid fuels, but excluding gaseous fuels and liquid fuels when they are used solely as fuels and excluding air introduced for the purpose ...

...aterial, the use of which may cause the discharge of an air contaminant into the open air, but not including that equipment defined as a fossil fuel fired steam generator. (14) "Process weight" means the total weight of all materials introduced into the source operation including solid fuels, but excluding gaseous fuels and liquid fuels when they are used solely as fuels and excluding air introdu...

...ration to whom this rule applies, shall discharge no visible emissions to the outside air during the collection, processing (including incineration), packaging, transporting, or deposition of any asbestos-containing waste material, and use one of the methods specified in paragraphs (B)(1) to (B)(4) of this rule: (1) Adequately wet asbestos-containing waste material by doing all of the following: (a) Mix control dev...

...fill pipe" means any fill pipe with the discharge opening entirely submerged when the liquid level is six inches above the bottom of the tank; or when applied to a tank which is loaded from the side, shall mean any fill pipe with the discharge opening entirely submerged when the liquid level is eighteen inches above the bottom of the tank. (7) "Volatile photochemically reactive material" means any photochemically re...

...fill pipe" means any fill pipe with the discharge opening entirely submerged when the liquid level is six inches above the bottom of the tank; or when applied to a tank which is loaded from the side, means any fill pipe with the discharge opening entirely submerged when the liquid level is eighteen inches above the bottom of the tank. (7) "Volatile photochemically reactive material" means any photochemically reactiv...

...o" shall not cause, allow or permit the discharge into the ambient air of any VOC from flock line number 2, 3, or 4 (emissions units P078, P079 and P080 in accordance with permit-to-install P0111501) unless the VOC content of the adhesive or other coating employed within said flock line does not exceed 2.6 pounds of VOC per gallon of coating, excluding water and exempt solvents (as applied). (f) [Reserved.] (g) Exc...

...o" shall not cause, allow or permit the discharge into the ambient air of any VOC from flock line number 2, 3, or 4 (emissions units P078, P079 and P080 in accordance with permit-to-install P0111501) unless the VOC content of the adhesive or other coating employed within said flock line does not exceed 2.6 pounds of VOC per gallon of coating, excluding water and exempt solvents (as applied). (f) [Reserved.] (g) Exc...

...ly plant may cause, allow or permit the discharge into the ambient air of any VOC after the dates specified in rule 3745-21-04 of the Administrative Code in excess of the following: (a) For a prime coat coating line employing electrodeposition, one of the following: (i) 1.2 pounds of VOC per gallon of coating, excluding water and exempt solvents, or, if a control system is employed, 1.4 pounds of VOC per gallon of ...

... plant shall cause, allow or permit the discharge into the ambient air of any VOC after the dates specified in rule 3745-21-04 of the Administrative Code in excess of the following: (a) For a prime coat coating line employing electrodeposition, one of the following: (i) 1.2 pounds of VOC per gallon of coating, excluding water and exempt solvents, or, if a control system is employed, 1.4 pounds of VOC per gallon of ...

...hat are halogenated process vents being discharged to a combustion device require halogen reduction control (either a pre-combustion or post-combustion). (3) (Group 1) A process vent shall be group 1 if it meets at least one of the following specifications: (a) The owner or operator designates the process vent as group 1. (b) At representative operating conditions expected to yield the lowest T...

...to this rule, vents an emergency relief discharge into a common flare header of this flare, paragraph (DD)(10)(d) of rule 3745-21-09 of the Administrative Code shall not apply during such emergency relief discharge. (E) Determination of uncontrolled total annual mass emissions and actual weighted average flow rate values for a batch process train or unit operation. (1) Uncontrolled total annual mass emissions shall...

...losed when not in use. (b) Un-atomized discharge of solvent into a paint waste container that is kept closed when not in use. (c) Disassembly of the spray gun and cleaning in a vat that is kept closed when not in use. (d) Atomized spray into a paint waste container that is fitted with a device designed to capture atomized solvent emissions. (6) Store the following materials in nonabsorbent, non-leaking containers...

...on-effect coating 6.7 Electrostatic discharge and electromagnetic interference (EMI) coating 6.7 Elevated temperature Skydrol-resistant commercial primer 6.2 Epoxy polyamide topcoat 5.5 Fire-resistant (interior) coating 6.7 Flexible primer 5.3 Flight test coatings; all other 7.0 Flight test coatings: missile or single use aircraft 3.5 Fuel tank adhesive 5.2 Fuel tank coating 6.0 ...

...his rule may cause, allow or permit the discharge into the ambient air of any VOC in excess of the following limitations: (1) For primary coatings: (a) For EDP primer coating operations: (i) When the solids turnover ratio is 0.16 or greater; 0.70 pound of VOC per gallon of solids. (ii) When the solids turnover ratio is greater than or equal to 0.040 and less than 0.160; 0.70 x 350 (0.160-RT) pounds of VOC per ga...

...applicable. (j) Sedimentation pond and discharge structures and surface water run-on and runoff control structures. (k) Other necessary details including but not limited to structural fill for berms and subbase, gas collection layer, and transitional cover. (C) Reports. The following information shall be presented in narrative form in a report with a table of contents and divided and labeled ac...