Ohio Administrative Code Search

...ially hazardous activities or excessive noise in the campground area. (10) Water and other recreation areas under the control of the licensee shall be operated and maintained in a safe condition. (11) The licensee shall establish rules for the patrons of the campground. Rules shall be conspicuously posted or provided to patrons as they initially enter the campground. Such rules shall inclu...

...y to create offensive odors, flies, noise, traffic, or any similar hazards. Housing constructed or installed after April 2, 1985 shall be a minimum of two hundred feet from conditions that create or are likely to create offensive odors, flies, noise, and at least fifteen feet from the edge of the drivable portion of a public roadway. (3) Housing constructed or installed after the effective da...

...eak (kVp), and scan time. (15) "CT noise" means the per cent standard deviation of the fluctuations in CTN expressed as a percentage of the attenuation coefficient of water. (16) "CT number" or "(CTN)" means the number used to represent the x-ray attenuation associated with each elemental area of the CT image. (17) "Cumulative air kerma" means the total air kerma accrued from the beginning ...

...ge peak (kVp), and scan time. (15) "CT noise" means the per cent standard deviation of the fluctuations in CTN expressed as a percentage of the attenuation coefficient of water. (16) "CT number" or "(CTN)" means the number used to represent the x-ray attenuation associated with each elemental area of the CT image. (17) "Cumulative air kerma" means the total air kerma accrued from the beginning of an examination or...

...lude CT number accuracy and uniformity, noise, artifacts, radiation beam width, resolution for low and high contrast, alignment light accuracy, and table travel accuracy; and (d) . Develop the written quality control program conducted by the CT technologist appropriate for the evaluation of the CT system that includes the tests and allowable tolerance limits. The quality control evaluation for im...

...lude CT number accuracy and uniformity, noise, artifacts, radiation beam width, resolution for low and high contrast, alignment light accuracy, and table travel accuracy; and (d) Develop the written quality control program conducted by the CT technologist appropriate for the evaluation of the CT system that includes the tests and allowable tolerance limits. The quality control evaluation for imag...

...e purpose of reducing the sound of road noise in the passenger compartment. (16) "Automobile and light-duty truck gasket/gasket sealing material" means a fluid, used at an automobile or light-duty truck assembly coating facility, applied to coat a gasket or replace and perform the same function as a gasket. Automobile and light-duty truck gasket/gasket sealing material includes room temperature vulcanization (RTV) s...

...e purpose of reducing the sound of road noise in the passenger compartment. (16) "Automobile and light-duty truck gasket/gasket sealing material" means a fluid, used at an automobile or light-duty truck assembly coating facility, applied to coat a gasket or replace and perform the same function as a gasket. Automobile and light-duty truck gasket/gasket sealing material includes room temperature vulcanization (RTV) s...

...e purpose of reducing the sound of road noise in the passenger compartment. (16) "Automobile and light-duty truck gasket/gasket sealing material" means a fluid, used at an automobile or light-duty truck assembly coating facility, applied to coat a gasket or replace and perform the same function as a gasket. Automobile and light-duty truck gasket/gasket sealing material includes room temperature ...

...e condition. (ii) Loud internal engine noise, obvious exhaust leaks, or a missing tailpipe. (3) A vehicle known to be on an emission related recall or that has an unresolved emission related recall repair will not be inspected until the recall repair is completed and documented with proof of the work performed. After such proof has been presented, an emission test may be performed on the vehicle. Recall repair cos...

...ition. (ii) Loud internal engine noise, obvious exhaust leaks, or a missing tailpipe. (3) A vehicle known to be on an emission related recall or that has an unresolved emission related recall repair will not be inspected until the recall repair is completed and documented with proof of the work performed. After such proof has been presented, an emission test may be performed on the vehicle. R...

...rate the facility in such a manner that noise, dust, and odors are strictly controlled so as not to cause a nuisance or a health hazard. (4) The owner or operator shall operate the facility in such a manner that the attraction, breeding, and emergence of insects, rodents, and other vectors are strictly controlled so as to not cause a nuisance or a health hazard. The owner or operator shall in...

...rate the facility in such a manner that noise, dust, and odors are strictly controlled so as not to cause a nuisance or a health hazard. (4) The owner or operator of an industrial landfill or a residual landfill facility disposing of IMW as defined in paragraph (I)(1)(c) of rule 3745-30-01 of the Administrative Code shall operate the facility in such a manner that the attraction, breeding, and ...

...s. (C) The results of a temperature or noise log shall be used to determine the absence of significant fluid movement under paragraph (A)(2) of this rule. (D) The director may allow the use of a test to demonstrate mechanical integrity other than those listed in paragraphs (B) and (C) of this rule with the written approval of the administrator of the United States environmental protection agency...

...s. (C) The results of a temperature or noise log shall be used to determine the absence of significant fluid movement under paragraph (A)(2) of this rule. (D) The director may allow the use of a test to demonstrate mechanical integrity other than those listed in paragraphs (B) and (C) of this rule with the written approval of the administrator of the United States environmental protection agency...

...r survey; and (c) A temperature or noise log; and (d) A casing inspection log, if required by the director; and (e) Any other test required by the director. (B) Whole cores or sidewall cores of the confining and injection zones and formation fluid samples from the injection zone shall be taken. The director may accept cores from nearby wells if the owner or operator can demonstrate tha...

...ed by the director. (3) A temperature, noise, or other log approved by the director shall be run at least once every three years to test for movement of fluid along the bore hole. The director may require such tests whenever the well is worked over. (4) Casing inspection logs shall be run whenever the owner or operator conducts a workover in which the injection string is pulled, unless the direc...

...y the director; and (3) A temperature, noise, or other log approved by the director shall be run at least once every three years to test for movement of fluid along the bore hole. The director may require such tests whenever the well is worked over; and (4) Casing inspection logs shall be run whenever the owner or operator conducts a workover in which the injection string is pulled, unless the director waives this ...

...irections, screening, or other means of noise and odor control, that any component of a disposal system will not negatively impact a neighboring building, public health or the environment. (b) That the general public that is located within the disposal system service area has been notified of the proposed reduced isolation distances and has been given an opportunity to view the proposal and comment. All comments sha...

...irections, screening, or other means of noise and odor control, any component of a disposal system will not negatively impact a neighboring building, public health or the environment. (b) That the general public located within the disposal system service area has been notified of the proposed reduced isolation distances and given an opportunity to view the proposal and comment. (2) For any request to reduce an iso...

...duct designed to reduce friction, heat, noise, or wear between moving parts, or to loosen rusted or immovable parts or mechanisms. Lubricant does not include: automotive power steering fluids; products for use inside power generating motors, engines, and turbines, and their associated power-transfer gearboxes; two cycle oils or other products designed to be added to fuels; products for use on the human body; or anim...

... designed to reduce friction, heat, noise, or wear between moving parts, or to loosen rusted or immovable parts or mechanisms. Lubricant does not include: automotive power steering fluids; products for use inside power generating motors, engines, and turbines, and their associated power-transfer gearboxes; two cycle oils or other products designed to be added to fuels; products for use on the ...

...create a nuisance or health hazard from noise, dust, odors, and the attraction or breeding of birds, insects, rodents, and other vectors. (17) The owner or operator shall not cause water pollution. (C) Records management. (1) The owner or operator shall obtain an approved and valid license as required by Chapter 3745-37 of the Administrative Code. The owner or operator shall retain at the facil...

...create a nuisance or health hazard from noise, dust, odors, and the attraction or breeding of birds, insects, rodents, and other vectors. (17) The owner or operator shall not cause water pollution. (18) Additional compliance specifications for a co-located processing facility. The owner or operator shall conduct operations at the co-located processing facility as follows: (a) Within the horizontal limits of constr...

...ts a nuisance or health hazard from noise, dust, or odors generated at the processing facility. (14) In compliance with the fire prevention and response plan prepared in accordance with paragraph (H) of this rule and with the applicable requirements in Chapter 1301:7-7 of the Administrative Code. (15) Upon request by the director or approved board of health, conduct a topographic survey and ...