Ohio Revised Code Search

...A deputy mine inspector shall investigate the employment of miners in and about the mines in his district, and if he finds any minors employed in violation of section 1565.10 of the Revised Code, he shall make a complaint thereof to the juvenile court, or any other court having competent jurisdiction, against the employer of such minors.

...No person shall be employed in or around a mine until he has attained the age of eighteen years. No person shall refuse or neglect to comply with this section.

...The miners employed in a mine may appoint two of their number to act as a safety committee to inspect, not more often than once each month, the mine and the machinery connected therewith, and to measure the ventilating current. The operator may accompany such committee, or appoint two or more persons for that purpose. The operator shall afford every necessary facility for making such inspection and measurement, but t...

...When a loss of life is occasioned by accident in any mine, the operator thereof shall forthwith give notice thereof to the chief of the division of mineral resources management, and to the deputy mine inspector in charge of the district. Such notice shall be given by telephone or electronic format. The operator of such mine shall, within twenty-four hours after such accident causing loss of life, send a written repor...

... by statute for injury or death of any employee.

...Each person who performs labor in opening or developing any mine, mining, or labor connected therewith, has a lien upon all the property of the person, firm, or corporation owning, constructing, or operating such mine, for the full value of such labor, upon the same terms as mechanics' liens are secured and enforced.

...EMT-basic, an EMT-I, a paramedic, or an employee at a surface coal mine who has satisfied the training requirements established in division (D)(1) of this section. (3) "Mine medical responder" means a person who has satisfied the requirements established in rules adopted under division (E)(1) of this section or has been issued a certificate under division (E)(2) of this section. (B) The operator of an underground...

...Motormen and trip riders shall use care in handling the locomotive and cars, and shall see that the signal or marker is used for the purpose as provided. Motormen and trip riders shall be governed by the speed provided for in sections 1567.39, 1567.40, and 1567.41 of the Revised Code in handling cars. No person shall refuse or neglect to comply with this section.

...No person shall work by himself as a miner in a coal mine without having produced satisfactory evidence to the mine foreman of such mine that he has worked at least one year with, or as, a practical coal miner. This section applies only to mines generating methane, other gas, or combustible matter. No mine foreman of a coal mine shall permit anyone to mine coal in such mine until such person is qualified, unless he...

...On receipt of a notice pursuant to section 3123.43 of the Revised Code, the chief of the division of mineral resources management shall comply with sections 3123.41 to 3123.50 of the Revised Code and any applicable rules adopted under section 3123.63 of the Revised Code with respect to a certificate issued pursuant to this chapter.

...Whoever knowingly violates any section of this chapter is guilty of a minor misdemeanor.

... within the state shall be known as the Ohio co-ordinate system of 1927 and the Ohio co-ordinate system of 1983. This chapter applies only to the Ohio co-ordinate system of 1927 and the Ohio co-ordinate system of 1983 and to the use of these systems. Under these systems the state is divided into a north zone and a south zone. The area included in the following counties on the effective date of this amendment, shal...

...in the north zone, the Ohio co-ordinate system of 1927 or the Ohio co-ordinate system of 1983 shall be named, and in any land description in which it is used it shall be designated, the Ohio co-ordinate system of 1927, north zone, or the Ohio co-ordinate system of 1983, north zone. As established for use in the south zone, the Ohio co-ordinate system of 1927 or the Ohio co-ordinate system of 1983 shall be named, and...

...nited States survey foot when using the Ohio co-ordinate system of 1927, and expressed in metres and decimals of a metre when using the Ohio co-ordinate system of 1983. One of these distances, known as the "x co-ordinate," shall give the position in an east and west direction; the other, known as the "y co-ordinate," shall give the position in a north and south direction. These co-ordinates shall be made to depend up...

...xclusively upon either Ohio co-ordinate system.

...When any tract of land extends from one zone into the other the co-ordinate zones established by section 157.01 of the Revised Code, the positions of all points on its boundaries may be referenced to either of the two zones.

...of commerce: (1) The "Ohio co-ordinate system of 1927, north zone" is a Lambert conformal conic projection of the Clarke spheroid of 1866, having standard parallels at north latitudes of 40° 26' and 41° 42' along which parallels the scale shall be exact; the origin of co-ordinates is at the intersection of the meridian 82° 30' west of Greenwich and the parallel 39° 40' north latitude. This origin is given the co-ord...

...he date of such survey shall apply. The publication by the United States department of commerce of existing control stations or the acceptance by the department of newly established control stations with intent to publish them shall constitute evidence of adherence to federal geodetic control committee specifications. These limitations may be modified by a duly authorized state agency to comply with local conditions.

...Extension of co-ordinate control by qualified surveyors for local co-ordinate control densification shall be executed in conformity with standards of accuracy and specifications for first or second-order geodetic surveys as prepared and published by the federal geodetic control committee of the United States department of commerce pursuant to section 157.07 of the Revised Code. Control monumentation for analysis of l...

...Distances, bearings, and areas computed indirectly from co-ordinates shall be considered acceptable measurement evidence for land and other surveys if such co-ordinates have been determined in accordance with sections 157.04, 157.07, and 157.08 of the Revised Code.

...Use of the terms "Ohio co-ordinate system of 1927, north zone," or "Ohio co-ordinate system of 1927, south zone," on any map, report of survey or other document shall be limited to co-ordinates based on the "Ohio co-ordinate system of 1927" as defined in this chapter.

... the Revised Code, the Ohio co-ordinate system of 1927 shall not be used after 1999 and the Ohio co-ordinate system of 1983 shall be used after that date. Nothing in sections 157.01 to 157.10 of the Revised Code shall be construed to require that land descriptions using the Ohio co-ordinate system of 1927 and recorded before January 1, 2000, be conformed to the Ohio co-ordinate system of 1983.

...As used in this chapter: (A) "Articles of organization" means the articles of organization described in section 1706.16 of the Revised Code, and those articles of organization as amended or restated. (B) "Assignment" means a transfer, conveyance, deed, bill of sale, lease, mortgage, security interest, encumbrance, gift, or transfer by operation of law. (C) "Constituent limited liability company" means a constit...

...This chapter may be cited as the "Ohio Revised Limited Liability Company Act."

...(A) A person knows a fact when either of the following is met: (1) The person has actual knowledge of the fact. (2) The person is deemed to know the fact under law other than this chapter. (B) A person has notice of a fact when any of the following is met: (1) The person knows of the fact. (2) The person receives notification of the fact. (3) The person has reason to know the fact from all the facts known...