Ohio Revised Code Search

...ant. Upon receipt of the application together with the fee prescribed by section 1548.10 of the Revised Code, and if the application appears to be regular, the clerk shall issue to the applicant a memorandum certificate for the watercraft or outboard motor. If the memorandum certificate is lost or destroyed, the holder of it may obtain a certified copy of it by applying for the copy on a form prescribed by the chief,...

...proper fees, may prepare and furnish title information in such form and subject to such territorial division or other classification as the chief may direct. The chief may search the records of the division of parks and watercraft and make reports thereof, and make photographic copies of the division records and attestations thereof. Fees therefor shall be charged and collected as follows: (A) For searches of the r...

...ision of parks and watercraft shall enable the public to access watercraft and outboard motor title information via electronic means. No fee shall be charged for this access. The title information that must be so accessible is only the title information that is in an electronic format at the time a person requests this access. The chief shall establish procedures governing this access. The procedures may be establis...

... by manufacturers or importers and the method of certification of the names of said agents.

...The clerk of the court of common pleas and his authorized deputies may administer oaths on any application or affidavit required by Chapter 1548. of the Revised Code.

...r, conservancy district officer, constable, or state highway patrol trooper, having knowledge of a stolen watercraft or outboard motor, shall immediately furnish the chief of the division of parks and watercraft with full information concerning the theft. The chief, whenever a report of the theft or conversion of a watercraft or outboard motor is received, shall make a distinctive record of it, including the make of...

...atercraft for which a certificate of title is required or a watercraft powered by an outboard motor for which a certificate of title is required without having the certificate, or a valid temporary permit and number, in accordance with this chapter or, if a physical certificate of title has not been issued for it, operate the watercraft or outboard motor in this state knowing that the ownership information relating t...

... attempt to procure a certificate of title to a watercraft or outboard motor, or pass or attempt to pass a certificate of title or any assignment of a certificate of title to a watercraft or outboard motor, or in any other manner gain or attempt to gain ownership of a watercraft or outboard motor, knowing or having reason to believe that the watercraft or outboard motor has been stolen; (B) Sell or offer for ...

... against the creditors of the debtor, whether armed with process or not, and against subsequent purchasers, secured parties, and other lienholders or claimants. All security interests, liens, mortgages, and encumbrances entered into the automated title processing system in relation to a particular certificate of title, regardless of whether a physical certificate of title is issued, take priority according to the ord...

...t be the subject of a certificate of title until it is mortgaged, sold, or otherwise disposed of.

...state to the credit of the waterways safety fund the fees received by the chief under sections 1548.10 and 1548.14 of the Revised Code.

...(A) Whoever violates section 1548.18 of the Revised Code is guilty of a misdemeanor of the fourth degree. (B) Whoever violates section 1548.19 of the Revised Code is guilty of a felony of the fifth degree.

...Nothing in this chapter applies to activities that are permitted and regulated under Chapter 1514. of the Revised Code.

...n or state, as far as practicable, to meet the requirements of the United States bureau of mines for permissible machinery or appliances; in case any piece of machinery or appliance is worn out and is not so connected with the use of other machinery and appliances as to make it necessary to replace such worn-out piece with the same type in order to continue the use of the connected appliances and machinery, the machi...

..., obstruct or throw open an airway, handle or disturb any part of the machinery of the hoisting engine of a mine, open a door of a mine and neglect to close it, endanger the mine or those working therein, disobey an order given in pursuance of law, or do a willful act which may endanger the lives and health of persons working therein, the security of a mine, or the machinery connected therewith.

...t the cable does not make contact with metallic rails on the track, and shall avoid, where possible, leaving the cable in water. If they remove props which have been placed by the miner for the security of the roof, they shall reset such props as promptly as possible. No person shall refuse or neglect to comply with this section.

...pon the property connected therewith, unless the consent of the owner, lessee, or agent has been secured, and then only when accompanied by a guide furnished by such owner, lessee, or agent. This does not prohibit persons seeking employment at such mine, or the authorized representatives of the employees, from entering upon the property as is necessary to make such application to the proper authority or to transact b...

... foreman. No person shall refuse or neglect to comply with this section.

...a mine foreman or fire boss, or owner, lessee, agent, or operator of the mine, or a representative of either accompanied by a mine foreman or fire boss, shall remove or go beyond any caution board or danger signal placed at the entrance to any working place or old workings in a mine, unless permitted to do so by either a mine foreman or a fire boss after such mine foreman or fire boss has acquainted himself with th...

...mployed. The report shall also state whether or not there is a proper supply of material on hand for the safe working of the mine, and whether or not the requirements of the law are complied with. The mine foreperson shall also, once each week, enter plainly or have entered in ink, in the book, a true report of all air measurements required by this chapter and Chapters 1561., 1563., and 1565. of the Revised Code, d...

...r minute than one hundred fifty cubic feet for each person measured at the point in the mine where distribution to the various working sections begins and distributed to the working faces so as to expel or dilute and render harmless, explosive, poisonous, and noxious gases. The air shall be measured at the last entry break-through in each working section to see that a sufficient volume of air, not less than nine thou...

... mine shall be placed at least twenty feet from the side or mouth of the shaft entry or slope with which it is connected for ventilating purposes and shall be of fireproof construction. Explosion doors shall be provided in a direct line with the mine opening. Upon the written order of the chief of the division of mineral resources management, all main mine fans installed after September 2, 1941, shall be so arranged...

...Booster and blower fans may be installed only with the approval of the chief of the division of mineral resources management, following the submission by the owner, lessee, or agent of a definite plan of ventilation in which it is proposed to use such fans and the reason therefor. No operator of a mine shall refuse or neglect to comply with this section.

...iately, and he shall not allow them to return to their work until the ventilation has been restored and the mine has been thoroughly examined by him, or by a foreman or fire boss, and reported safe. No person shall refuse or neglect to comply with this section.

...sured at least once each week at the inlet and outlet, at or near the face of all entries, and at that point in the mine where distribution to the various working sections begins. Such measurements shall be noted in duplicate on blanks furnished by the division of mineral resources management. On the first day of each month, the mine foreperson shall forward such blanks with the mine foreperson's signature thereon t...