Skip to main content
Back To Top Top Back To Top
The Legislative Service Commission staff updates the Revised Code on an ongoing basis, as it completes its act review of enacted legislation. Updates may be slower during some times of the year, depending on the volume of enacted legislation.

Ohio Revised Code Search

Titles
Busy
 
Keywords
:
manslaughter
{"removedFilters":"","searchUpdateUrl":"\/ohio-revised-code\/search\/update-search","keywords":"manslaughter","start":1501,"pageSize":25,"sort":"BestMatch","title":""}
Results 1,501 - 30 of 30
Sort Options
Sort Options
Sort Options
Sections
Section
Section 1567.17 | Rules for use of direct current.

...Where direct current is used underground in mines, the following rules shall govern: (A) In determining the voltage limit the difference in potential shall not exceed three hundred twenty-five volts measured by a meter at the nearest switchboard except with the written approval of the chief of the division of mineral resources management. (B) For the protection of circuits, a switch and circuit breaker shall be ins...

Section 1567.18 | Rules for use of alternating current.

...When alternating current is used underground in mines, the following rules apply: (A) On all low voltage circuits all wires shall be protected by a switch and an automatic overload circuit breaker on each wire of the circuit, except that fuses may be substituted for circuit breakers in the case of lighting circuits and in the case of power circuits transmitting twenty-five kilowatts or less. All wires shall be insu...

Section 1567.19 | Grounding of machines and armored cable using alternating current.

...At all stripping mines where alternating current is used to operate shovels or to convert alternating current to direct current, and where the machines used for this purpose are installed on the shovel or building attached thereto, or where armored cables are used to conduct the current from the main transmission line to the shovel, all machines and armored cables so installed or used shall be grounded in a manner ap...

Section 1567.20 | Electrical equipment to be grounded.

...The frame and bed plates of generators, transformers, motors other than low voltage mobile motors, and all metallic cable covering other than trailing cables, shall be efficiently grounded. No owner, lessee, agent, or operator of a mine shall violate this section.

Section 1567.21 | Employment of shot firers.

...In gaseous mines or portions of mines as defined by section 1563.02 of the Revised Code, a sufficient number of shot firers shall be employed. The shot firer shall charge, tamp, and fire all holes properly placed, and refuse to charge any holes not properly placed. Whenever such shot firers are required to be employed, it shall be unlawful for any one other than a shot firer to charge, tamp, or fire any blast within ...

Section 1567.22 | Use of black powder.

...In all gaseous mines, as defined in section 1563.02 of the Revised Code, no black powder shall be used for blasting coal and all shots shall be fired by a shot firer. No owner, lessee, agent, or operator of a mine shall violate this section.

Section 1567.23 | Handling explosives in mines.

...No employee, worker, or miner shall have in the employee's, worker's, or miner's possession inside of an underground mine more than one twenty-five pound keg or box of blasting powder or other explosives. Every person who has powder or other explosives in an underground mine shall keep the same in a wooden box suitable to contain the original container of such explosive. Such box shall be kept at all times at least t...

Section 1567.24 | Conveyance of explosives.

...Blasting powder or explosives shall not be taken into or out of a mine, or moved from place to place in a mine, along any entry or haulway where there are electric wires, while the power is on such wires, except when such powder or explosive is conveyed in insulated cars, boxes, or packages. No operator, or miner shall refuse or neglect to comply with this section.

Section 1567.25 | Explosives to be protected from contact with fire.

...Whenever a workman is about to open a box, package, or keg, containing powder or other explosives, and while handling the same, he shall place and keep his lamp at least five feet distant from such explosives, and in such a position that the air current cannot convey sparks to it. No person shall approach nearer than five feet to any box, keg, or package, containing powder or other explosives, or within five feet of ...

Section 1567.26 | Explosives and tools on cages or stairways.

...Powder, explosives, and working tools shall not be taken down or up a hoisting shaft in a cage when men are going down or up, nor shall such articles be taken down or up a stairway used for ingress and egress of persons. No miner or owner, lessee, agent, or operator of a mine shall violate this section.

Section 1567.27 | Use of squibs and fuses - tamping.

...No employee in a mine, who is about to fire a shot with a squib, shall shorten the fuse, saturate it with oil, or ignite it, except at the extreme end; he shall see that all persons are out of danger from the probable effects of such shot, and if it is a rib shot, he shall notify the persons working next to him on said rib before firing said shot, and shall take measures to prevent anyone approaching by shouting "fir...

Section 1567.30 | Firing of shots - appointed times.

...At a mine where the firing of shots is restricted to specific times, no miner shall fire a shot until the time appointed for him to do so, and then only in such rotation as designated.

Section 6111.314 | Reporting and monitoring requirements.

...(A) The director of environmental protection may impose all of the following mitigation reporting and monitoring requirements on any person performing mitigation as required under division (B)(1)(a) of section 6111.313 of the Revised Code: (1) A requirement that all mitigation for an ephemeral feature that is a water of the state be monitored for up to two years following the completion of mitigation construction a...

Section 731.53 | Procedure when owner fails to comply with notice.

...If the owner, lessee, agent or tenant having charge of the lands mentioned in section 731.51 of the Revised Code, fails to comply with the notice required by such section, the legislative authority of a municipal corporation shall cause such noxious weeds to be cut and destroyed or such litter removed and may employ the necessary labor to perform the task. All expenses incurred shall, when approved by the legislative...

Section 903.01 | Concentrated animal feeding facility definitions.

...As used in this chapter: (A) "Agricultural animal" means any animal generally used for food or in the production of food, including cattle, sheep, goats, rabbits, poultry, and swine; horses; alpacas; llamas; and any other animal included by the director of agriculture by rule. "Agricultural animal" does not include fish or other aquatic animals regardless of whether they are raised at fish hatcheries, fish farms, or...

Section 956.031 | Additional requirements for high volume breeders.

...In addition to complying with rules adopted under section 956.03 of the Revised Code, a high volume breeder shall do all of the following with regard to a dog that is kept, housed, and maintained by the breeder: (A) Unless otherwise directed by a veterinarian, provide the dog, twice each day, with food that is all of the following: (1) Sufficient to maintain normal body condition and weight; (2) Unspoiled and u...

Section 956.04 | High volume breeder license.

...(A)(1) No person shall operate a high volume breeder in this state without a high volume breeder license issued by the director of agriculture in accordance with this section and rules adopted under section 956.03 of the Revised Code. (2) The director shall not issue a license under this section unless the director determines that the applicant will operate or will continue to operate the high volume breeder in acco...