Ohio Revised Code Search

...omer does not take possession of a die, mold, pattern, or form located in this state within three years of the date it was last used, and no agreement in writing between the customer and the molder is made to the contrary, all of the customer's rights and title to, and interest in the die, mold, pattern, or form may be transferred to the molder for the purpose of destroying such die, mold, pattern, or form. In order ...

...(A)(1) A molder has a lien on a die, mold, pattern, or form that is in his possession and that belongs to a customer, for the following: (a) The amount due from the customer for plastic, metal, paper, china, ceramic, glass, or rubber fabrication work performed with the die, mold, pattern, or form, or for making or improving the die, mold, pattern, or form; (b) The cost associated with the notification described in ...

...(A)(1) A moldbuilder has a lien on all molds produced by it and on all proceeds from the assignment, sale, transfer, exchange, or other disposition of the molds produced by it until the moldbuilder is paid in full all amounts due the moldbuilder for the production of the mold or these proceeds. The lien described in this division attaches when the mold is delivered from the moldbuilder to the customer. (2) The amoun...

..."Customer" means a person that causes a moldbuilder to fabricate, cut, cast, or design molds. (B) "Mold" means molds, dies, forms, tools, and parts, for the plastic industry or for the metal forming industry. (C) "Moldbuilder" means a person, including but not limited to, a model maker, patternmaker, die maker, jig and fixture builder, die sinker, mold designer, mold programmer, and mold engineer, that fabricates, ...

...(A) To enforce a moldbuilder's lien attached pursuant to section 1333.33 of the Revised Code, the moldbuilder shall give written notice to the customer and molder stating that a lien is claimed; the amount that the moldbuilder claims is owed for fabrication, repair, or modification of the mold; and a demand for payment. The written notice described in this division shall be given by hand delivery or certified mail, r...

...9 to 1333.31 of the Revised Code: (A) "Molder" means any person, including, but not limited to, a tool or die maker, who does either of the following: (1) Fabricates, casts, or otherwise makes, or improves, a die, mold, pattern, or form to produce plastic, metal, paper, china, ceramic, glass, or rubber products; (2) Uses a die, mold, pattern, or form to manufacture, assemble, or otherwise make a plastic, metal, pa...

...d in this section: (1) "Label" means a molded imprint or raised symbol that includes a code consisting of letters and numbers and is placed on or near the bottom of a plastic bottle or rigid plastic container to indicate the plastic resin used to produce the bottle or container. (2) "Plastic" means any material made of polymeric organic compounds and additives that can be shaped by means of the flowing of the mater...

...feedstocks, including scrap tires, tire molds, automobile engine belts, brake pads and hoses, weather stripping, fittings, electrical insulation, and other molded objects and parts. (K) "Auxiliary container" has the same meaning as in section 3767.32 of the Revised Code.

...f are shown on such container by being molded, printed, or otherwise labeled on such container or such name and location may be shown on the bottle cap in the case of permanently and distinctively branded bottles; but a licensee under sections 913.22 to 913.28, inclusive, of the Revised Code, has not violated this section if the container for the soft drink of such licensee shows on such container the product ...

... the alteration of bank notes, or dies, molds, or other articles necessary in the making of counterfeit money and reasonably believed to be intended to be used by them for those types of unlawful purposes.

...vel, shales, oil, natural gas, brines, molding sands, and other natural substances of use and value, excluding only those pertaining to water usable as such for agricultural, industrial, commercial, and domestic purposes, but not excluding other rock fluids such as natural and artificial brines and oil-well fluids; (C) Shall make special studies and reports of resources of geological nature within the state th...

...41.02 of the Revised Code; (b) Plates, molds, and matrices, or the specific violative portions of masters, tapes, negatives, digital recordings, electronic media, or other items, from which products, merchandise, goods, or other materials may be manufactured or reproduced. (E) As part of a final judgment, a court may order the destruction or other reasonable disposition of items described in division (D)(4) of this...

...ndirect, a drug or medicine, appliance, mold or cast, application, operation, or treatment, of whatever nature, for the cure or relief of a wound, fracture or bodily injury, infirmity, or disease. (B) The treatment of human ills through prayer alone by a practitioner of the Christian Science church, in accordance with the tenets and creed of such church, shall not be regarded as the practice of medicine, provided t...

...nsing, and orientation; fabricating ear molds; providing auditory training and speech reading; and administering tests of vestibular function and tests for tinnitus in accordance with section 4753.14 of the Revised Code. The "practice of audiology" includes speech and language screening limited to a pass-or-fail determination, for the purpose of identification of individuals with disorders of communication. The pract...

...ts, as for example, rust, smut, mildew, mold, yeast, and bacteria, except those on or in living human beings or other animals, or processed food, beverages, or pharmaceuticals. (V) "General use pesticide" means a pesticide that is classified for general use under the federal act. (W) "Ground equipment" means any device, other than aircraft, used on land or water to apply pesticides in any form. (X) "Incidental ...