Ohio Revised Code Search
Section |
---|
Section 1567.19 | Grounding of machines and armored cable using alternating current.
...At all stripping mines where alternating current is used to operate shovels or to convert alternating current to direct current, and where the machines used for this purpose are installed on the shovel or building attached thereto, or where armored cables are used to conduct the current from the main transmission line to the shovel, all machines and armored cables so installed or used shall be grounded in a manner ap... |
Section 1567.20 | Electrical equipment to be grounded.
...The frame and bed plates of generators, transformers, motors other than low voltage mobile motors, and all metallic cable covering other than trailing cables, shall be efficiently grounded. No owner, lessee, agent, or operator of a mine shall violate this section. |
Section 1567.21 | Employment of shot firers.
...In gaseous mines or portions of mines as defined by section 1563.02 of the Revised Code, a sufficient number of shot firers shall be employed. The shot firer shall charge, tamp, and fire all holes properly placed, and refuse to charge any holes not properly placed. Whenever such shot firers are required to be employed, it shall be unlawful for any one other than a shot firer to charge, tamp, or fire any blast within ... |
Section 1567.22 | Use of black powder.
...In all gaseous mines, as defined in section 1563.02 of the Revised Code, no black powder shall be used for blasting coal and all shots shall be fired by a shot firer. No owner, lessee, agent, or operator of a mine shall violate this section. |
Section 1567.23 | Handling explosives in mines.
...No employee, worker, or miner shall have in the employee's, worker's, or miner's possession inside of an underground mine more than one twenty-five pound keg or box of blasting powder or other explosives. Every person who has powder or other explosives in an underground mine shall keep the same in a wooden box suitable to contain the original container of such explosive. Such box shall be kept at all times at least t... |
Section 1567.24 | Conveyance of explosives.
...Blasting powder or explosives shall not be taken into or out of a mine, or moved from place to place in a mine, along any entry or haulway where there are electric wires, while the power is on such wires, except when such powder or explosive is conveyed in insulated cars, boxes, or packages. No operator, or miner shall refuse or neglect to comply with this section. |
Section 1567.25 | Explosives to be protected from contact with fire.
...Whenever a workman is about to open a box, package, or keg, containing powder or other explosives, and while handling the same, he shall place and keep his lamp at least five feet distant from such explosives, and in such a position that the air current cannot convey sparks to it. No person shall approach nearer than five feet to any box, keg, or package, containing powder or other explosives, or within five feet of ... |
Section 1567.26 | Explosives and tools on cages or stairways.
...Powder, explosives, and working tools shall not be taken down or up a hoisting shaft in a cage when men are going down or up, nor shall such articles be taken down or up a stairway used for ingress and egress of persons. No miner or owner, lessee, agent, or operator of a mine shall violate this section. |
Section 1567.27 | Use of squibs and fuses - tamping.
...No employee in a mine, who is about to fire a shot with a squib, shall shorten the fuse, saturate it with oil, or ignite it, except at the extreme end; he shall see that all persons are out of danger from the probable effects of such shot, and if it is a rib shot, he shall notify the persons working next to him on said rib before firing said shot, and shall take measures to prevent anyone approaching by shouting "fir... |
Section 1567.30 | Firing of shots - appointed times.
...At a mine where the firing of shots is restricted to specific times, no miner shall fire a shot until the time appointed for him to do so, and then only in such rotation as designated. |
Section 1567.31 | Drill holes.
...When a miner drills holes in the face of coal for blasting and such drill hole bottoms in the permanent roof, he shall not charge or fire such drill hole. No miner shall drill a new hole in such a way that any part of it shall be within twelve inches of any part of an unused drill hole or one in which there has been a misfired shot. No miner shall drill out or attempt to drill out the charge or tamping in a misfired ... |
Section 1567.32 | Misfired shots.
...A miner after firing a shot shall not leave the mine until he has determined whether or not such shot has misfired. If a shot misfires, such miner shall so report to the foreman in charge of the section in which he works before he leaves the mine. |
Section 1567.33 | Examination after each blast.
...After each blast, the miner shall exercise great care in examining the roof and coal, and shall secure them safely before beginning to load coal. No person shall refuse or neglect to comply with this section. |
Section 1567.34 | Solid shooting.
...The owner, lessee, or agent of any mine shall not order or permit solid shooting in a mine unless the owner, lessee, or agent has obtained written permission to do so from the chief of the division of mineral resources management, who may issue such permit when in the chief's judgment such solid shooting is necessary for the just and reasonably profitable operation of such mine. No owner, lessee, agent, or operator ... |
Section 1567.35 | Use of gasoline, naphtha, kerosene, fuel oil or gas engine.
...t satisfies requirements established in rules adopted by the chief under section 1513.02 of the Revised Code governing the use of diesel equipment in underground mines. No owner, lessee, agent, or operator of a mine shall violate this section. |
Section 1567.36 | Fire extinguishers.
...At each permanent underground oil storage station there shall be two portable fire extinguishers and two hundred forty pounds of rock dust. One portable fire extinguisher shall be provided at each working section where twenty-five gallons or more of oil are stored in addition to extinguishers required under other sections of this chapter. No operator of a mine shall refuse or neglect to comply with this section. |
Section 1567.38 | Use of locomotive and haulage equipment.
...all be familiar with the haulage safety rules. Men shall proceed in an orderly manner to and from mantrips and no person shall be permitted to get on or off a moving mantrip. Explosives and detonators shall not be permitted on any mantrip or hauled within five minutes before or after any mantrip. Mantrips shall not be permitted to proceed until the operator of the mantrip is assured that he has a clear road. Sup... |
Section 1567.39 | Lights and signals for locomotives and cars - riding on locomotive - protection against runaway or self-propelled equipment.
...The operator of an underground coal mine, at which locomotives are used for hauling coal, shall keep a light on the front end of the locomotive when it is in use. When the locomotive is run ahead of the trip, and the trip rider is not required to ride the rear car of the trip, a signal, light, or marker, approved by the deputy mine inspector, shall be carried on the rear end of the trip to indicate when the trip has ... |
Section 1567.40 | Riding on haulage trips.
...No person except those in charge of trips, superintendents, mine foremen, mine electricians, machinists, and blacksmiths, when required by their duty, shall ride on haulage trips, except where by mutual agreement in writing between the owner, lessee, or agent, and the employees, a special trip of empty cars is run for the purpose of taking employees into and out of the mine, or empty cars attached to loaded trips, wh... |
Section 1567.41 | Operation of trolley ahead of locomotive.
...The motormen shall not run the locomotive with the trolley ahead of the locomotive, except in cases where they cannot do otherwise. In such case, the locomotive shall be run only at a speed of two miles per hour. |
Section 1567.42 | Riding on locomotive or cars.
...The person in charge of trips shall warn persons forbidden to ride on the locomotive or cars, and shall not permit such persons to ride on locomotives or cars contrary to this chapter and Chapters 1561., 1563., and 1565. of the Revised Code. |
Section 1567.43 | Signal light.
...The trip rider in charge of rope haulage trips shall see that the signal light, as required by section 1567.39 of the Revised Code, is in place and in proper condition before starting the trip. No person shall refuse or neglect to comply with this section. |
Section 1567.44 | Handling cars.
...Drivers shall use care in handling cars, especially going down grade and at junction points. No person shall refuse or neglect to comply with this section. |
Section 1567.45 | Limitation on number of persons in cage or elevator - hoisting equipment safety examination.
...her device; and have a proper margin of safety. Cages, platforms, or other devices that are used to transport persons in shafts and slopes shall be equipped with safety catches or other no less effective devices approved by the chief of the division of mineral resources management that act quickly and effectively in an emergency, and such catches shall be tested at least once every two months. Hoisting equipment, inc... |
Section 1567.46 | Windlass required.
...When the only means of egress is by vertical shaft in which cages or elevators are used as a means of hoisting persons employed in a mine, and the power for operating same is derived from but one source, the owner, lessee, or agent shall provide and keep on hand a suitable windlass capable of hoisting persons from the mine, for use in the event of an accident to the hoisting apparatus or the power by which the same i... |