Ohio Administrative Code Search
Rule |
---|
Rule 1301:5-1-19 | License reactivation and renewal.
... satisfactory evidence of honorable discharge or separation under honorable conditions therefrom within six months of such discharge or separation. The licensee will be required to timely file both a renewal and continuing education on or before the dates required by section 4735.13 of the Revised Code. (3) A license that was suspended pursuant to division (C) of section 4735.13 of the Revised ... |
Rule 1301:5-7-02 | Continuing education requirements.
...l filed following the date of honorable discharge or separation under honorable conditions from the armed forces. (D) Each licensee, who is seventy years of age or older shall submit proof of completing the hours of continuing education listed in paragraph (E) of this rule on or before the licensee's date of birth and every three years thereafter. Each licensee with an inactive license, or broker ... |
Rule 1301:6-3-14.2 | Dealers not required under federal law or the law of this state to be registered as a broker or dealer with the securities and exchange commission.
...mployment. (1) Upon the resignation or discharge of a salesperson, the dealer employing such salesperson shall, within thirty calendar days, deliver to the division a request to cancel the license of the salesperson. The request shall be made on form U-5, "Uniform Termination Notice for Securities Industry Registration." Dealers shall submit changes to the division on a paper form U-5. (2) Except as hereinafter ... |
Rule 1301:6-3-15 | Application for securities dealer license; responsibilities of licensed securities dealer.
...mployment. (1) Upon the resignation or discharge of a salesperson, the dealer employing such salesperson shall, within thirty calendar days, deliver to the division a request to cancel the license of the salesperson. The request shall be made on form U-5, "Uniform Termination Notice for Securities Industry Registration." Dealers affiliated with the "Financial Industry Regulatory Authority" shall submit the form U-5 ... |
Rule 1301:7-7-02 | Definitions.
... |
Rule 1301:7-7-04 | Emergency planning and preparedness.
...above or below the lowest level of exit discharge and for buildings having an ambulatory care facility. (5) 403.5 Group E occupancies. An approved fire safety and evacuation plan in accordance with paragraph (D)(404) of this rule shall be prepared and maintained for Group E occupancies and for buildings containing both a Group E occupancy and an atrium. Group E occupancies shall comply with paragraphs (C)(5)(a)(403.... |
Rule 1301:7-7-06 | Building services and systems.
... |
Rule 1301:7-7-09 | Fire Protection Systems.
... |
Rule 1301:7-7-10 | Means of Egress.
... |
Rule 1301:7-7-11 | Construction Requirements for Existing Buildings.
... |
Rule 1301:7-7-20 | Aviation facilities.
...ed as follows: (a) Where the open-hose discharge capacity of the fueling system is not more than 200 gallons per minute (13 L/s), not less than two listed portable fire extinguishers complying with paragraph (F)(906) of rule 1301:7-7-09 of the Administrative Code and having a minimum rating of 20-B:C shall be provided. (b) Where the open-hose discharge capacity of the fueling system is more than... |
Rule 1301:7-7-23 | Motor Fuel-Dispensing Facilities and Repair Garages.
... |
Rule 1301:7-7-24 | Flammable finishes.
...es by positive displacement pumps, pump discharge lines shall be provided with an approved relief valve discharging to pump suction or a safe detached location. (d) 2403.3.4 Liquid transfer. Where a flammable mixture is transferred from one portable container to another, a bond shall be provided between the two containers. Not less than one container shall be grounded. Piping systems for Class I ... |
Rule 1301:7-7-25 | Fruit and crop ripening.
...3.1 Location. Ethylene gas shall be discharged only into approved rooms or enclosures designed and constructed for this purpose. (2) 2503.2 Dispensing. Valves controlling discharge of ethylene shall provide positive and fail-closed control of flow and shall be set to limit the concentration of gas in air below 1,000 parts per million (ppm). (D) Section 2504 Sources of ignition (1) 2504.1 ... |
Rule 1301:7-7-27 | Semiconductor Fabrication Facilities.
... |
Rule 1301:7-7-29 | Manufacture of organic coatings.
...s that take suction at floor levels and discharge to a safe location outside the structure. Noncontaminated intake air shall be introduced in such a manner that all portions of solid floor areas are provided with continuous uniformly distributed air movement. (6) 2905.6 Heating. Heating provided in hazardous areas shall be by indirect means. Ignition sources such as open flames or electrical heat... |
Rule 1301:7-7-33 | Fire safety during construction and demolition.
... be located so that exhausts do not discharge against combustible material. (b) Exhausts shall be piped to the outside of the building. (c) Equipment shall not be refueled while in operation. (d) Fuel for equipment shall be stored in an approved area outside of the building. (Q) Section 3317 Safeguarding roofing operations (1) 3317.1 General. Roofing operations utilizing heat-producin... |
Rule 1301:7-7-34 | Tire rebuilding and tire storage.
...locity. 3. The collecting system shall discharge the rubber particles to an approved outdoor noncombustible or fire-resistant container that is emptied at frequent intervals to prevent overflow. (3) 3403.3 Cleaning. The buffing area shall be cleaned at frequent intervals to prevent the accumulation of rubber particles. (4) 3403.4 Spray rooms and booths. Each spray room or spray booth where flam... |
Rule 1301:7-7-50 | Hazardous Materials - General Provisions.
... |
Rule 1301:7-7-50 | Hazardous Materials - General Provisions.
... |
Rule 1301:7-7-51 | Aerosols.
...ic streets 20 Buildings 50 Exit discharge to a public way 50 Lot lines 20 Other outside storage 50 For SI: 1 inch = 25.4 mm, 1 foot = 304.8 mm. a. The minimum separation distance indicated is not required where exterior walls having a 2-hour fire-resistance rating without penetrations separate the storage from the exposure. The walls shall extend not less than 30 inches above and to the sides of... |
Rule 1301:7-7-53 | Compressed gases.
...ure relief devices shall be arranged to discharge upward and unobstructed to the open air in such a manner as to prevent any impingement of escaping gas upon the container, adjacent structures or personnel. Exception: DOTn specification containers having an internal volume of 30 cubic feet (0.855 m 3 ) or less. (e) 5303.3.5 Freeze protection. Pressure relief devices or vent piping shall be designed ... |
Rule 1301:7-7-55 | Cryogenic fluids.
...ure relief devices shall be arranged to discharge unobstructed to the open air in such a manner as to prevent impingement of escaping gas on personnel, containers, equipment and adjacent structures or to enter enclosed spaces. Exception: DOTn-specified containers with an internal volume of 2 cubic feet (0.057 m 3 ) or less. (f) 5503.2.6 Shutoffs between pressure relief devices and containers. Shutoff valves shall n... |
Rule 1301:7-7-56 | Explosives and Fireworks.
... |
Rule 1301:7-7-56 | Explosives and Fireworks.
... |