Ohio Administrative Code Search

...have an atmosphere relatively free from mold (not exceeding ten mold colonies per cubic foot of air). Inlet fans shall be screened and should be provided with an adequate air filtering device to eliminate dirt and dust from incoming air. Ventilation systems shall be cleaned periodically and shall be maintained in good repair. Exhaust outlets shall be screened or be provided with self-closing louve...

...d vapor to prevent the formation of mold growth and surface oxidation. Packaging materials shall be practically free of bacterial contamination. In addition, the outer package wrapper should be resistant to punctures, tearing, cracking, or breaking under normal conditions of handling, shipping, and storage. When special-type packaging is used the instructions of the manufacturer shall be follo...

...have an atmosphere relatively free from mold (not exceeding ten mold colonies per cubic foot of air) and maintained in good repair. Storage rooms shall be provided with natural or artificial light, well distributed with at least five foot-candles of light and have sufficient air space and air circulation to prevent condensation and excessive odors. The ceilings, walls, beams, and floors shall be f...

...have an atmosphere relatively free from mold, (not exceeding ten mold colonies per cubic foot of air) and shall be maintained in good repair. They shall be adequately lighted and proper circulation of air shall be maintained at all times. The floors, walls, and ceilings shall be of construction that permits thorough cleaning.

...luding paraffin, bandages, rind surface mold, unclean areas, or any other part which is unwholesome or unappetizing. (B) Forming containers either lined or unlined shall be assembled and stored in a sanitary manner to prevent contamination. The handling of containers shall be done with extreme care and in a sanitary manner. Preforming and assembling of pouch liners and containers shall be kep...

...rid, or decomposed substance, including mold, mildew, and other contaminants; (c) It has been produced, processed, prepared, packed, or held under unsanitary conditions whereby it may have been contaminated with filth, or whereby it may have been rendered injurious to health; or (d) Its container is composed, in whole or in part, of any poisonous or deleterious substance that may render the cont...

...of, including but not limited to leaf mold, flowers, foliage, fruit, grass, turf, humus, shrubs, and dead wood, except in a specific area where the chief has authorized. Pine cones on the ground, berries, fruit, tree nuts, mushrooms, and naturally-shed antlers may be carried away during daylight hours from any area except any area where a restriction against such activities has been posted. Such taking ma...

...n institutional priority to continually mold thriving individuals to be citizens that use a lifelong model for reflection, resilience, meaning, and lifelong happiness. (g) Talent development and human resources committee. The talent development and human resources committee is responsible for studying, monitoring and making recommendations on the development of all university policies and pract...

...n institutional priority to continually mold thriving individuals to be citizens that use a lifelong model for reflection, resilience, meaning, and lifelong happiness. (g) Talent development and human resources committee. The talent development and human resources committee is responsible for studying, monitoring and making recommendations on the development of all university policies and pract...

...

...d 0.90 pound per hour. (2) For the mold making operation associated with the sand reclamation process (OEPA source number F001), the particulate emissions shall not exceed 0.0055 pound per hour. (3) For the casting shakeout operation associated with the sand reclamation process (OEPA source number F001), the particulate emissions shall not exceed 0.016 pound per hour. (4) For the cleani...

...d 0.90 pound per hour. (2) For the mold making operation associated with the sand reclamation process (OEPA source number F001), the particulate emissions shall not exceed 0.0055 pound per hour. (3) For the casting shakeout operation associated with the sand reclamation process (OEPA source number F001), the particulate emissions shall not exceed 0.016 pound per hour. (4) For the cleani...

...n of a topcoat on surfaces such as trim moldings, door locks and door sills, where sanding is impractical. (b) For the purpose of rule 3745-21-26 of the Administrative Code, a coating that is applied to a polyolefin part to promote the adhesion of a subsequent coating. An adhesion primer is clearly identified as an adhesion primer or adhesion promoter on its accompanying material safety data sheet. (2) "Adhesive" m...

...n of a topcoat on surfaces such as trim moldings, door locks and door sills, where sanding is impractical. (b) For the purpose of rule 3745-21-26 of the Administrative Code, a coating that is applied to a polyolefin part to promote the adhesion of a subsequent coating. An adhesion primer is clearly identified as an adhesion primer or adhesion promoter on its accompanying material safety data sheet. (2) "Adhesive" m...

... a topcoat on surfaces such as trim moldings, door locks and door sills, where sanding is impractical. (b) For the purpose of rule 3745-21-26 of the Administrative Code, a coating that is applied to a polyolefin part to promote the adhesion of a subsequent coating. An adhesion primer is clearly identified as an adhesion primer or adhesion promoter on its accompanying material safety data shee...

...5, P042, P052, R001, R003, R004 Core Molding Technologies, Inc. 0125041046 P007 Clean Harbors Recycling Services of Ohio L.L.C. 0145020235 P001, P003-P011, P013, P016 Stanley Electric US Company 0149000089 R022, R023 Masco Cabinetry Middlefield LLC (KraftMaid Plant #1) 0228000186 K001-K019 Henkel Consumer Adhesives, Inc. 0243081155 P001, P002, P012, P015 The Kennedy Group 0243081245 K001...

... P013, P014, P052, R003, R004 Core Molding Technologies, Inc. 0125041046 P007 Clean Harbors Recycling Services of Ohio L.L.C. 0145020235 P001, P003-P011, P013, P016 Stanley Electric US Company 0149000089 R022, R023 Cabinetworks Group Middlefield LLC (Plant #1) 0228000186 K001-K019 Henkel US Operations Corporation 0243081155 P001, P002, P012, P015 The Kennedy Group 0243081245 K001 T...

...graph (P)(2) of this rule for any sheet molding compound manufacturing machine, and within fifteen days after the end of each month, and shall maintain a record of the VOC emissions from any SMC manufacturing machine for the recent month and the rolling twelve-month period. However, this exclusion is not available for any facility that has, or once had, a potential to emit for VOC equal to or greater than 10.0 tons p...

...graph (P)(2) of this rule for any sheet molding compound manufacturing machine, and within fifteen days after the end of each month, and shall maintain a record of the VOC emissions from any SMC manufacturing machine for the recent month and the rolling twelve-month period. However, this exclusion is not available for any facility that has, or once had, a potential to emit for VOC equal to or greater than 10.0 tons p...

...t. (e) Fabricated metal products. (f) Molded plastic parts. (g) Automotive or transportation equipment. (h) Interior or exterior automotive parts. (i) Construction equipment. (j) Motor vehicle accessories. (k) Bicycles and sporting goods. (l) Toys. (m) Recreational vehicles. (n) Pleasure craft (recreational boats). (o) Extruded aluminum structural components. (p) Railroad cars. (q) Heavier vehicles, exce...

...t. (e) Fabricated metal products. (f) Molded plastic parts. (g) Automotive or transportation equipment. (h) Interior or exterior automotive parts. (i) Construction equipment. (j) Motor vehicle accessories. (k) Bicycles and sporting goods. (l) Toys. (m) Recreational vehicles. (n) Pleasure craft (recreational boats). (o) Extruded aluminum structural components. (p) Railroad cars. (q) Heavier vehicles, exce...

...aragraph (A)(2) of this rule: (a) Open molding resin and gel coat operations (these include pigmented gel coat, clear gel coat, production resin, tooling gel coat, and tooling resin). (b) Resin and gel coat mixing operations. (c) Resin and gel coat application equipment cleaning operations. The owner or operator of a boat manufacturing facility that manufactures solely fiberglass parts of boats such as hatches, s...

...aragraph (A)(2) of this rule: (a) Open molding resin and gel coat operations (these include pigmented gel coat, clear gel coat, production resin, tooling gel coat, and tooling resin). (b) Resin and gel coat mixing operations. (c) Resin and gel coat application equipment cleaning operations. The owner or operator of a boat manufacturing facility that manufactures solely fiberglass parts of boats such as hatches, s...

...ergy. (k) Equipment used for injection molding of resins where no more than one million pounds (five hundred tons) of resins (thermoplastic or thermosetting) per rolling twelve-month period are used in injection machines at the facility. (l) Storage tanks for any of the following: (i) Inorganic liquids including water (at standard temperature and pressure) except as described in paragraph (B)(1)(m)(vii) of this ru...

...l generators, injection and compression molding, crushing and screening plants, soil-vapor extraction and soil-liquid extraction) and desires to continue operating under the permit-by-rule shall submit to the appropriate Ohio environmental protection agency district office or local air agency by July 29, 2006 a written notification which contains all of the elements required in paragraph (C)(1)(b) of this rule. (e)...

...M D7088. (b) Coating resistant to mold and mildew growth and with a microbial growth rating of eight or more, as determined in accordance with ASTM D3273 and ASTM D3274. (2) "Bitumens" means black or brown materials including, but not limited to, asphalt, tar, pitch, and asphaltite that are soluble in carbon disulfide, consist mainly of hydrocarbons, and are obtained from natural deposits o...

...rid, or decomposed substance, including mold, mildew, and other contaminants; (c) It has been produced, processed, prepared, packed, or held under unsanitary conditions whereby it may have been contaminated with filth, or whereby it may have been rendered injurious to health; or (d) Its container is composed, in whole or in part, of any poisonous or deleterious substance that may render the contents injurious to he...

...rid, or decomposed substance, including mold, mildew, and other contaminants; (c) It has been produced, processed, prepared, packed, or held under unsanitary conditions whereby it may have been contaminated with filth, or whereby it may have been rendered injurious to health; or (d) Its container is composed, in whole or in part, of any poisonous or deleterious substance that may render the cont...

...al interwoven, punched, pressed, or molded into a flexible, padded form. (D) "Napper" means the lint removed during the process of raising the face of a cloth. (E) "Card," "strips," or "stripping" means the fibrous by-product produced by or removed from the carding cloth following the carding process. (F) "Comber" means the fibrous by-product removed during the combing process. (G) "Fly" m...

...terial interwoven, punched, pressed, or molded into a flexible, padded form. (D) "Napper" means the lint removed during the process of raising the face of a cloth. (E) "Card," "strips," or "stripping" means the fibrous by-product produced by or removed from the carding cloth following the carding process. (F) "Comber" means the fibrous by-product removed during the combing process. (G) "Fly" means the fibrous by-...

...reformed sand aggregate inserted into a mold to shape the interior of a casting. (2) "Core box" means a wood, metal or plastic structure used to shape sand into a core. (3) "Crucible" means a ceramic pot or receptacle used in melting molten metal, transporting it or both. (4) "Cupola" means a cylindrical furnace lined with refractories for melting metal in direct contact with the fuel by forcing air under pressure...

...reformed sand aggregate inserted into a mold to shape the interior of a casting. (2) "Core box" means a wood, metal or plastic structure used to shape sand into a core. (3) "Crucible" means a ceramic pot or receptacle used in melting molten metal, transporting it or both. (4) "Cupola" means a cylindrical furnace lined with refractories for melting metal in direct contact with the fuel b...

...(A) Molds. (1) No employee shall be required to work under suspended loads. (2) All molding machines shall be equipped with two-hand controls or equivalent protective devices for each employee assigned to the machine. (3) Automatic molding machines which go through a complete cycle without an operator shall be guarded. (4) Where the clearance between the mold conveyor and any fixed or portable...

...(A) Molds. (1) No employee shall be required to work under suspended loads. (2) All molding machines shall be equipped with two-hand controls or equivalent protective devices for each employee assigned to the machine. (3) Automatic molding machines which go through a complete cycle without an operator shall be guarded. (4) Where the clearance between the mold conveyor and any fixed or port...

... This does not apply to pouring and mold preparation platforms. (3) Pit areas on charging and tapping sides of steelmaking processes shall be provided with drainage. (4) Provision shall be made to shut off the oxygen when a furnace is shut down for repairs. (5) Tapping platforms and charging floors. (a) Tapping platforms and charging floors shall be provided with standard guardrailings...

...ification does not apply to pouring and mold preparation platforms. (3) Pit areas on charging and tapping sides of steelmaking processes shall be provided with drainage. (4) The oxygen shall be shut off when a furnace is shut down for repairs. (5) Tapping platforms and charging floors. (a) Tapping platforms and charging floors shall be provided with standard guard railings. This specificat...

... presses. (a) Inserting or removing molds. Molds shall be provided with lugs, handles, or hooks for use when inserting or removing the molds from the platen presses by hand. (b) Track stops. Where tracks are used with platen presses, the tracks shall be equipped with stops to prevent the molds from being pulled or pushed off the tracks. (c) Work tables. (i) Stops. Work tables used with plate...

...ten presses. (a) Inserting or removing molds. Molds shall be provided with lugs or handles for use when inserting or removing the molds from the platen presses by hand, otherwise a hook shall be provided for the purpose. (b) Track stops. Where tracks are used with platen presses they shall be equipped with stops to prevent the molds from being pulled or pushed off the tracks. (c) Work tables. (i) Stops. Work t...

...ation, including but not limited to mold, fungal, bacterial, or particulate contamination; or (c) Any significant chemical, physical, or other change or deterioration of the dispensed compounded drug preparation within the compounded drug preparation's assigned beyond use date. (2) A product quality issue does not include an isolated allergic reaction to a substance included in a compounded ...

...ation, including but not limited to mold, fungal, bacterial, or particulate contamination; or (c) Any significant chemical, physical, or other change or deterioration of the dispensed compounded drug preparation within the compounded drug preparation's assigned beyond-use date. (2) A product quality issue does not include an isolated allergic reaction to a substance included in a compounded ...

...ation, including but not limited to mold, fungal, bacterial, or particulate contamination; or (c) Any significant chemical, physical, or other change or deterioration of the dispensed compounded drug preparation within the compounded drug preparation's assigned beyond-use date. (2) A product quality issue does not include an isolated allergic reaction to a substance included in a compounded ...

...sware, molten glass is dropped into molds in a forming machine, where it is spun into the desired form. The formed glassware is released from the molds onto a conveyor where it gradually cools. The conveyor enters and annealing lehr which tempers the glass. From annealing, the glassware moves on a long conveyor which again allows it to cool. The glassware is then sprayed with silicone which makes ...

...sware, molten glass is dropped into molds in a forming machine, where it is spun into the desired form. The formed glassware is released from the molds onto a conveyor where it gradually cools. The conveyor enters and annealing lehr which tempers the glass. From annealing, the glassware moves on a long conveyor which again allows it to cool. The glassware is then sprayed with silicone which makes ...