Ohio Administrative Code Search

...(A) No employee shall be required to enter into any confined space unless a confined space entry procedure, incorporating one of the following, is used (see appendix to this rule for recommended entry procedures): (1) Air sampling shall be performed by qualified, trained personnel prior to and periodically during occupancy to determine that the atmosphere within the confined space contains an...

...(A) No employee will be required to enter into any confined space unless a confined space entry procedure, incorporating one of the following, is used (see appendix to this rule for recommended entry procedures): (1) Air sampling will be performed by qualified, trained personnel prior to and periodically during occupancy to determine that the atmosphere within the confined space contains an a...

...(A) Unless the electrical conductors or equipment to be worked on are isolated from all possible sources of voltage or are effectively grounded, the employer shall provide protective equipment approved for the voltage involved, such as rubber gloves with protectors, rubber sleeves, hot line tools, line hose, line guards, insulator hoods, blankets, and access boards. Employees shall be instructed in the use of such to...

...(A) Unless the electrical conductors or equipment to be worked on are isolated from all possible sources of voltage or are effectively grounded, the employer will provide protective equipment approved for the voltage involved, such as rubber gloves with protectors, rubber sleeves, hot line tools, line hose, line guards, insulator hoods, blankets, and access boards. Employees will be instructed in the use of such tool...

...(A) Vehicle stability. The employer shall provide a vehicle that will assure a stable support for the aerial device. (1) Alternative configuration. (a) If the aerial device is capable of alternative configurations, these configurations, including the rated capacity in each situation, shall be stated on the operating instruction plate(s). Examples of alternative configurations requiring such a description on operat...

...(A) Vehicle stability. The employer will provide a vehicle that will assure a stable support for the aerial device. (1) Alternative configuration. (a) If the aerial device is capable of alternative configurations, these configurations, including the rated capacity in each situation, will be stated on the operating instruction plate(s). Examples of alternative configurations needing such a descr...

...(A) General specifications. (1) Utility companies and municipally owned utilities will be contacted and advised of proposed work prior to the start of actual excavation. Prior to opening an excavation, effort will be made to determine whether underground installations, i.e., sewer, telephone, water, fuel, electric lines, etc., will be encountered and, if so, where such underground installations are located. (2) An ...

...

...

...(A) Scope. The purpose of this chapter of the Administrative Code is to provide reasonable safety for life, limb and health of employees. In cases of practical difficulty or unnecessary hardship, the Ohio bureau of workers' compensation may grant exceptions from the literal provisions of the rules of this chapter or permit the use of other devices or methods when, in the opinion of the bureau, equivalent protection ...

...(A) Scope. The purpose of this chapter of the Administrative Code is to provide reasonable safety for life, limb, and health of employees. The specific provisions of this chapter supplement those of Chapter 4123:1-5 of the Administrative Code, and pertain to the employer for the protection of such employer's employees and no others and apply to the manufacture of castings containing iron, steel...

...(A) Scope. The purpose of these safety requirements is to provide reasonable safety for life, limb and health of employees. In cases of practical difficulty or unnecessary hardship, the Ohio bureau of workers' compensation may grant exceptions from the literal provisions of these requirements or permit the use of other devices or methods when, in the opinion of the industrial commission, equivalent protection is the...

...(A) Scope. The purpose of this chapter of the Administrative Code is to provide reasonable safety for life, limb, and health of employees. These specific provisions of this chapter supplement those of Chapter 4123:1-5 of the Administrative Code, and pertain to the employer for the protection of such employer's employees and no others and apply to steel making and the processes used in conjuncti...

...(A) Scope. The purpose of these safety requirements is to provide reasonable safety for life, limb and health of employees. In cases of practical difficulty or unnecessary hardship, the Ohio bureau of workers' compensation may grant exceptions from the literal provisions of these requirements or permit the use of other devices or methods when, in the opinion of the superintendent of the division of safety and hygien...

...(A) Scope. The purpose of this chapter of the Administrative Code is to provide reasonable safety for life, limb, and health of employees. These specific provisions of this chapter supplement Chapter 4123:1-5 of the Administrative Code and pertain to the employer for the protection of such employer's employees and no others and apply to places of employment wherein laundering or drycleaning pro...

...(A) Scope. The purpose of these safety requirements is to provide reasonable safety for life, limb and health of employees. In cases of practical difficulty or unnecessary hardship, the Ohio bureau of workers' compensation may grant exceptions from the literal provisions of these requirements or permit the use of other devices or methods when, in the opinion of the industrial commission, equivale...

...(A) Scope. The purpose of these safety requirements is to provide reasonable safety for life, limb, and health of employees. These specific requirements supplement those of Chapter 4123:1-5 of the Administrative Code and are minimum requirements of an employer for the protection of such employer's employees and no others and apply to the rubber and plastic industries where crude, synthetic, or recl...

...(A) Mill roll height. All mills shall be installed so that the top of the operating rolls is no less than fifty inches (one hundred twenty-seven centimeter) above the level on which the operator stands, irrespective of the size of the mill. This distance shall apply to the actual working level, whether it be at the general floor level, in a pit, or on a platform. (B) Mill controls. (1) Safety trip control. A safe...

...(A) Mill roll height. All mills shall be installed so that the top of the operating rolls is no less than fifty inches (one hundred twenty-seven centimeters) above the level on which the operator stands, irrespective of the size of the mill. This distance shall apply to the actual working level, whether the actual working level be at the general floor level, in a pit, or on a platform. (B) Mill controls. (1) Safe...

...(A) Scope. The purpose of these requirements is to provide reasonable safety for life, limb and health of employees. In cases of practical difficulty or unnecessary hardship, the Ohio bureau of workers' compensation may grant exceptions from the literal provisions of these requirements or permit the use of other devices or methods when, in the opinion of the industrial commission, equivalent protection is thereby se...

...(A) Scope. The purpose of these requirements is to provide reasonable safety for life, limb, and health of employees. These specific provisions of this chapter supplement those of Chapter 4123:1-5 of the Administrative Code, but to the extent of inconsistency between these and any provision of Chapter 4123:1-5 of the Administrative Code, these provisions shall apply. These provisions are minimu...

...All ladders used in window cleaning operations shall comply with the requirements of paragraph (C) of rule 4123:1-5-03 of the Administrative Code in addition to the following: (A) Metal ladders shall not be provided for use where exposed electrical contacts are present. (B) Metal ladders shall not be provided when damaging chemicals are to be used, unless the ladder used has been appropriately treated to protect i...

...All ladders used in window cleaning operations shall comply with paragraph (C) of rule 4123:1-5-03 of the Administrative Code in addition to the following: (A) Metal ladders shall not be provided for use where exposed electrical contacts are present. (B) Metal ladders shall not be provided when damaging chemicals are to be used unless the ladder used has been appropriately treated to protect it from...

...(A) Swinging scaffold platforms shall be no less than twenty inches wide overall. The platform shall be securely fastened to the hangers by U-bolts or by other equivalent means. (B) The hangers of swinging scaffolds shall be capable of sustaining four times the rated load. (C) When hoisting machines are used on swinging scaffolds, such machines shall be of an approved design. (D) The roof irons or hooks shall be o...

...(A) Swinging scaffold platforms shall be no less than eighteen inches (forty-six centimeters) wide overall. The platform shall be securely fastened to the hangers by U-bolts or by other equivalent means. (B) The hangers of swinging scaffolds shall be capable of sustaining four times the rated load. (C) When hoisting machines are used on swinging scaffolds, such machines shall be of an approved d...