Ohio Revised Code Search
Section |
---|
Section 1563.08 | Surveying party - fees.
...When the affidavit has been made, and notice given, as provided in section 1563.07 of the Revised Code, upon the application of the person giving notice, the person in charge of the mine shall transport, by the ordinary method for entrance and exit in use at such mine, a surveying party of not more than three persons, furnish them with a competent guide, and supply them with necessary and proper lamps. The person req... |
Section 1563.09 | Examination or survey - liability for damage.
...The person owning or operating a mine shall not hinder or obstruct an examination or survey under section 1563.07 of the Revised Code, if made at a reasonable time, in a reasonable manner, and as provided by law. If the owner or lessee of a mine sustains damage for which compensation should be made because such examination or survey was made at an unreasonable time, or in an improper or unwarranted manner, the perso... |
Section 1563.10 | Refusal to permit survey - judgment.
...If the owner, lessee, or agent of a mine refuses to comply with sections 1563.08 and 1563.09 of the Revised Code, the person who makes the application for the survey may recover judgment as upon default, in a court of competent jurisdiction, against the owner, lessee, or agent, in such sum as he declares under oath that he believes to be justly due him for coal belonging to him taken by the owner, lessee, or agent o... |
Section 1563.11 | Mining near public roads.
...thority that is charged by law with the maintenance of a public road, and the approval of the chief of the division of mineral resources management has been obtained, no person, firm, or corporation, engaged in mining or quarrying any mineral, coal, stone, or clay, shall: (1) Extend any part of an open pit excavation closer than fifty feet of horizontal distance to any part of a public road; (2) Deposit mine refuse... |
Section 1563.111 | Mining near oil or gas well.
...No owner, lessee, or agent shall conduct mining operations within twenty-five feet of any known well, or locate a mine opening within three hundred feet of any well that produces oil or gas unless the owner, lessee, or agent obtains permission in writing from the chief of the division of mineral resources management. |
Section 1563.12 | Construction regulations to be observed in opening mine.
...Any person, firm, or corporation, beginning the opening of a mine, whether or not such person, firm, or corporation is the owner, lessee, or agent of the property upon which such mine is located, shall notify the chief of the division of mineral resources management, and observe the following in the construction of such mine: (A) If the opening is a slope or vertical shaft, no explosive used therein shall be ... |
Section 1563.13 | Maintenance of means of egress from mine.
...When a deputy mine inspector considers that the ways and means of egress in any underground mine from the interior working places to the surface are inadequate as a safe and ready means of escape in case of emergency, from danger of fire at any point, or any other cause that may result in the entombment of persons working in the mine, the deputy mine inspector shall give notice in writing to the owner, lessee, or age... |
Section 1563.14 | Two openings required - exceptions.
...Except as provided in this section, the operator of an underground coal mine shall not employ, or permit any person to work therein, unless there are at least two openings to every seam worked in such mine, separated by natural strata of not less than one hundred feet in breadth at any point, by which distinct means of ingress and egress are always available to the persons therein employed. Such openings need not bel... |
Section 1563.15 | Additional opening for protection against inundation.
...At any mine where there is a stream or body of water on the surface, or in the workings of the mine, at a higher level, which is likely to break through into such mine, and inundate either the traveling or escapement way of such mine, so as to prevent the egress of persons employed therein, the operator shall provide and maintain and additional opening by means of which such persons may escape without using the trave... |
Section 1563.16 | Doors.
...In the development of mines, doors shall be eliminated wherever practicable. All main or principal air currents shall be controlled by double doors to form an air lock, said doors to be self-closing and to be a sufficient distance apart to accommodate any trip that may be handled through them, thus having one door closed at all times. At all points where double doors are impracticable and single doors are used, there... |
Section 1563.17 | Break-throughs and brattices.
...From a point where the seam is reached in the opening of an underground mine, to a point not exceeding a distance of four hundred feet therefrom, break-throughs shall be made between mine entries, where there are no rooms worked, not more than one hundred feet apart, provided such entries are not advanced beyond the point where the break-through will be made until the break-through is complete. Break-throughs between... |
Section 1563.18 | Separate traveling ways.
...The operator of a mine shall provide and maintain, in safe condition for the purpose provided, two separate and distinct traveling ways from the interior workings of the mine, each of which shall be available to at least one opening to the surface. One of such traveling ways may be designated by such operator as the principal traveling way. One of such traveling ways shall be designated as the escapement way, which s... |
Section 1563.19 | Slopes and mechanical haulageways - refuge holes.
...The operator of a mine worked by shaft shall provide, and keep free from obstruction, a traveling way or passageway from one side of the shaft bottom to the other. Slopes and mechanical haulageways used as traveling ways by persons employed in a mine shall be made of a sufficient width to give not less than three feet of space between the rib and adjacent side of car or mechanical device to permit persons to pass mo... |
Section 1563.20 | Track in mines - minimum clearance.
...For the protection of transportation workers, track shall be laid to provide a minimum clearance of fourteen inches on the side of the entry opposite the trolley or feed wire at all haulage turnouts and crossovers between butt entries, on gathering passageways, on room entries, and chutes between room entries, except that where brake handles are on the side of mine cars, the clearance shall be provided on the wire si... |
Section 1563.21 | Location of boilers.
...The permanent boilers used for generating steam, and the buildings containing the boilers, shall not be nearer than sixty feet to any mine opening, or to a building or inflammable structure connected with or surrounding such opening. No owner, lessee, agent, or operator of a mine shall violate this section. |
Section 1563.23 | Bathing facilities, clothing change rooms, and sanitary toilet facilities to be provided.
...Each operator of an underground coal mine shall provide bathing facilities, clothing change rooms, and sanitary toilet facilities in a location at each mine convenient for the use of all mine employees. All such bathing facilities, change rooms, and sanitary toilet facilities shall be constructed and equipped so as to comply with applicable building codes. If no building code is applicable, such facilities shall be c... |
Section 1563.24 | Mine foreperson of gaseous mine - powers and duties.
...In all mines generating methane in such quantities as to be considered a gaseous mine under section 1563.02 of the Revised Code, the mine foreperson of such a mine shall: (A) Employ a sufficient number of competent persons holding foreperson of gaseous mines or fire boss certificates, except as provided in section 1565.02 of the Revised Code, to examine the working places whether they are in actual course of ... |
Section 1563.25 | Accumulation of combustible materials prohibited.
...Coal dust, loose coal, and other combustible materials shall not be permitted to accumulate in any active workings. Where mining operations raise an excessive amount of dust into the air, water or water with a wetting agent added to it, or other effective methods, shall be used to allay such dust at its source. No operator of a mine shall refuse or neglect to comply with this section. |
Section 1563.26 | Rock dusting - testing of dust samples.
...All mines, except those mines or locations in a mine that are too wet or too high in incombustible content to propagate an explosion, shall be rock dusted. The rock dusting shall be done with such regularity and frequency that all surfaces required to be rock dusted shall be kept in such condition that the incombustible content of the adhering and lodging dust is not less than sixty-five per cent. When methane is pre... |
Section 1563.27 | Examination of working place by mine foreman.
...The mine foreman shall examine or have examined the working place of each person working in the mine on each coal-producing shift that such person is working in such working place or more often when the circumstances so require. In case the mine foreman should delegate such duty of inspecting working places, when men are at the faces, the person to whom he delegates such authority shall be certified. As evidence of... |
Section 1563.28 | Examination of working place by fire boss.
...The worker performing the duties of fire boss shall, in an approved manner, use a flame safety lamp when making examinations under this chapter and Chapters 1561., 1565., and 1567. and applicable provisions of Chapter 1509. of the Revised Code. As evidence of such examinations the fire boss shall mark with chalk, upon the face of the coal or in some other conspicuous place, the fire boss's initials and the date... |
Section 1563.29 | Examination of working place by miner.
...Each miner shall examine his working place upon entering it, and shall not commence to mine or load until it is made safe. He shall be very careful to keep his working place in a safe condition. |
Section 1563.30 | Unsafe working place.
...When a working place becomes unsafe, the mine foreman shall order the persons working therein to cease mining or loading, and not remain in such working place, until it is safe, except as is necessary to make it safe. No person shall refuse or neglect to comply with this section. |
Section 1563.31 | Work to cease when working place found dangerous.
...If a miner finds his place becoming dangerous, he shall at once cease work and notify the mine foreman, or other person acting for the mine foreman, of such danger and, upon leaving such place, he shall place some plain warning at the entrance thereto to warn others from entering into the danger. Such miner shall not return until ordered to do so by the mine foreman. No person shall refuse or neglect to comply wit... |
Section 1563.32 | Fencing of dangerous places - danger signs.
...The mine foreman shall see that all dangerous places and old workings are properly fenced off, and proper dangersignal boards are hung on such fencing so that they may be plainly seen. He shall also travel all airways, and examine all the accessible openings to old workings as often as is necessary to insure their safety. All signs placed by the mine foreman under this section shall be marked "danger." No person sh... |