Skip to main content
Back To Top Top Back To Top
The Legislative Service Commission staff updates the Revised Code on an ongoing basis, as it completes its act review of enacted legislation. Updates may be slower during some times of the year, depending on the volume of enacted legislation.

Section 1548.05 | Manufacturer's or importer's certificate.


No manufacturer, importer, dealer, or other person shall sell or otherwise dispose of a new watercraft or outboard motor to a dealer to be used by the dealer for purposes of display and resale without delivering to the dealer a manufacturer's or importer's certificate executed in accordance with this section and with such assignments on it as are necessary to show title in the name of the purchaser. No dealer shall purchase or acquire a new watercraft or outboard motor without obtaining from the seller the manufacturer's or importer's certificate.

A manufacturer's or importer's certificate of the origin of a watercraft or outboard motor shall contain the following information in such form and together with such further information as the chief of the division of parks and watercraft may require:

(A) Description of the watercraft, including the make, year, length, series or model, if any, body type, hull identification number or serial number, and make, manufacturer's serial number, and horsepower of any inboard motor or motors; or description of the outboard motor, including the make, year, series or model, if any, manufacturer's serial number, and horsepower;

(B) Certification of the date of transfer of the watercraft or outboard motor to a distributor or dealer or other transferee, and the name and address of the transferee;

(C) Certification that this was the first transfer of the new watercraft or outboard motor in ordinary trade and commerce;

(D) Signature and address of a representative of the transferor.

An assignment of a manufacturer's or importer's certificate before a notary public or other officer empowered to administer oaths shall be printed on the reverse side of the manufacturer's or importer's certificate in the form to be prescribed by the chief. The assignment form shall include the name and address of the transferee, a certification that the watercraft or outboard motor is new, and a warranty that the title at the time of delivery is subject only to such liens and encumbrances as are set forth and described in full in the assignment.

Available Versions of this Section