Section 3318.038 | Water bottle filling stations and drinking fountains.
(A) As used in this section:
(1) "Drinking fountain" means a fountain to which all of the following apply:
(a) The fountain is designed to allow an individual to drink from the fountain.
(b) The fountain dispenses filtered, clean drinking water.
(c) The fountain is equipped with a protective cowl.
(d) The fountain is equipped with a water spout at least one inch above the overflow rim of the fountain.
(2) "Water bottle filling station" means a station to which both of the following apply:
(a) The station is designed to fill a bottle with water.
(b) The station dispenses filtered, clean drinking water.
(B) When reviewing design plans for a classroom facility construction project proposed under this chapter, the Ohio facilities construction commission shall require that each classroom facility included in the project shall contain, or provide for in the design plans, all of the following as a condition of approval of the project:
(1) A minimum of two water bottle filling stations in each building;
(2) A minimum of one drinking fountain or water bottle filling station on each floor and wing of each building;
(3) A minimum of one drinking fountain or water bottle filling station for every one hundred students projected to attend the building upon completion of the project.
(C) Each school district board or school governing body shall ensure that each drinking fountain and water bottle filling station installed in a classroom facility included in a project under this chapter is regularly cleaned and maintained.
(D) The requirements of this section are in addition to the requirements of Chapters 3781. and 3791. of the Revised Code and any rule adopted pursuant to those chapters.
Available Versions of this Section
- April 12, 2021 – Enacted by Senate Bill 259 - 133rd General Assembly [ View April 12, 2021 Version ]
- September 30, 2021 – Amended by House Bill 110 - 134th General Assembly [ View September 30, 2021 Version ]