Section 4511.121 | Bypassing vehicle weighing locations.
(A)(1) Except as provided in division (B) of this section, any operator of a commercial motor vehicle, upon approaching a scale location established for the purpose of determining the weight of the vehicle and its load, shall comply with any traffic control device or the order of a peace officer directing the vehicle to proceed to be weighed or otherwise inspected.
(2) Any operator of a commercial motor vehicle, upon bypassing a scale location in accordance with division (B) of this section, shall comply with an order of a peace officer to stop the vehicle to verify the use and operation of an electronic clearance device.
(B) Any operator of a commercial motor vehicle that is equipped with an electronic clearance device authorized by the superintendent of the state highway patrol under section 4549.081 of the Revised Code may bypass a scale location, regardless of the instruction of a traffic control device to enter the scale facility, if either of the following apply:
(1) The in-cab transponder displays a green light or other affirmative visual signal and also sounds an affirmative audible signal;
(2) Any other criterion established by the superintendent by rule is met.
(C) Any peace officer may order the operator of a commercial motor vehicle that bypasses a scale location to stop the vehicle to verify the use and operation of an electronic clearance device.
(D) Whoever violates division (A) of this section is guilty of a minor misdemeanor. If, within one year of the offense, the offender previously has been convicted of or pleaded guilty to a violation of division (A) of this section, whoever violates that division is guilty of a misdemeanor of the fourth degree. If, within one year of the offense, the offender previously has been convicted of or pleaded guilty to two or more violations of division (A) of this section, whoever violates division (A) is guilty of a misdemeanor of the third degree.
(E) As used in this section and in section 4549.081 of the Revised Code, "commercial motor vehicle" means any combination of vehicles with a gross vehicle weight rating or an actual gross vehicle weight of more than ten thousand pounds if the vehicle is used in interstate or intrastate commerce to transport property and also means any vehicle that is transporting hazardous materials for which placarding is required pursuant to 49 C.F.R. Parts 100 to 180.
Available Versions of this Section
- September 16, 2004 – House Bill 230 - 125th General Assembly [ View September 16, 2004 Version ]
- October 29, 2018 – Amended by House Bill 95 - 132nd General Assembly [ View October 29, 2018 Version ]