Skip to main content
Back To Top Top Back To Top
The Legislative Service Commission staff updates the Revised Code on an ongoing basis, as it completes its act review of enacted legislation. Updates may be slower during some times of the year, depending on the volume of enacted legislation.

Section 4785.03 | License required; exceptions [repealed 4/3/2033].

 

(A) Except as provided in divisions (C) and (D) of this section, no individual shall provide conveyance services in buildings or structures unless that individual is a licensed elevator mechanic and one of the following applies:

(1) The elevator mechanic is working for a licensed elevator contractor.

(2) The elevator mechanic is a sole proprietor who holds an elevator contractor's license.

(3) The elevator mechanic is a member of a partnership that holds an elevator contractor's license.

(B)(1) No individual shall wire any conveyance, from the mainline feeder terminals on the controller, unless that individual is a licensed elevator mechanic and one of the following applies:

(a) The elevator mechanic is working for a licensed elevator contractor.

(b) The elevator mechanic is a sole proprietor who holds an elevator contractor's license.

(c) The elevator mechanic is a member of a partnership that holds an elevator contractor's license.

(2) No other license shall be required to wire a conveyance.

(C) An individual or business entity providing conveyance services, including wiring a conveyance, exclusively in private residences is not required to obtain a license under this chapter.

(D)(1) Except as provided in division (D)(2) of this section, an individual or business entity shall not dismantle a conveyance unless licensed under this chapter.

(2) Division (D)(1) of this section does not apply to a conveyance that is to be destroyed as a result of a complete demolition of a secured building or structure or where the hoistway or wellway is demolished back to the basic support structure and where no access is permitted therein.

Last updated March 21, 2023 at 3:40 PM

Available Versions of this Section