Rule 3745-205-36 | Reporting - process vents.
(A) A semiannual report shall be submitted by owners and operators subject to the requirements of rules 3745-205-30 to 3745-205-36 of the Administrative Code to the director by dates specified by the director. The report shall include the following information:
(1) The U.S. EPA identification number, name, and address of the facility.
(2) For each month during the semiannual reporting period, dates when the control device exceeded or operated outside of the design specifications as described in paragraph (C)(4) of rule 3745-205-35 of the Administrative Code and as indicated by the control device monitoring required by paragraph (F) of rule 3745-205-33 of the Administrative Code and such exceedances were not corrected within twenty-four hours, or that a flare operated with visible emissions as described in paragraph (D) of rule 3745-205-33 of the Administrative Code and as determined by method 22 monitoring, the duration and cause of each exceedance or visible emissions, and any corrective measures taken.
(B) If, during the semiannual reporting period, the control device does not exceed or operate outside of the design specifications as described in paragraph (C)(4) of rule 3745-205-35 of the Administrative Code for more than twenty-four hours or a flare does not operate with visible emissions as described in paragraph (D) of rule 3745-205-33 of the Administrative Code, a report to the director is not required.
[Comment: For dates of non-regulatory government publications, publications of recognized organizations and associations, federal rules, and federal statutory provisions referenced in this rule, see rule 3745-50-11 of the Administrative Code titled "Incorporated by reference."]
Last updated June 12, 2023 at 9:26 AM
Supplemental Information