Rule 3745-267-10 | General facility standards - standardized permitting.
(A) Applicability- general facility standards for standardized permitting. Rules 3745-267-10 to 3745-267-18 of the Administrative Code apply to owners or operators of facilities that treat or store hazardous waste under a standardized permit pursuant to rules 3745-50-250 to 3745-50-320 of the Administrative Code, except as provided in paragraph (A)(2) of rule 3745-267-01 of the Administrative Code.
(B) Compliance with general facility standards. To comply with rules 3745-267-10 to 3745-267-18 of the Administrative Code, owners or operators shall obtain a U.S. EPA identification number as provided in paragraph (C) of this rule and follow the requirements for:
(1) Waste analysis in rule 3745-267-13 of the Administrative Code;
(2) Security in rule 3745-267-14 of the Administrative Code;
(3) Inspections in rule 3745-267-15 of the Administrative Code;
(4) Training in rule 3745-267-16 of the Administrative Code;
(5) Special waste handling in rule 3745-267-17 of the Administrative Code; and
(6) Location standards in rule 3745-267-18 of the Administrative Code.
(C) Obtain an identification number. Owners or operators shall apply to Ohio EPA for a U.S. EPA identification number following the Ohio EPA notification procedures, and using Ohio EPA form 9029. Owners or operators may obtain information and required forms from Ohio EPA.
[Comment: For dates of non-regulatory government publications, publications of recognized organizations and associations, federal rules, and federal statutory provisions referenced in this rule, see rule 3745-50-11 of the Administrative Code titled "Incorporated by reference."]
Last updated June 25, 2025 at 5:44 PM
Supplemental Information